<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> <p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> <h3>Obligatory Warning</h3> <p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> <h3>Revision History</h3> <p> <table width="100%" bgcolor="#EEE"> <tr bgcolor="#CCC"> <td width="60"> <b>Version</b> </td> <td width="100"> <b>Release Date</b> </td> <td> <b>Changes</b> </td> </tr> <tr> <td>1.07</td> <td>9 August 2011</td> <td> Parts Added: <ul> <li>2N7002PS - Dual N-Channel MOSFET (SOT363)</li> <li>24AA256 - 256K (32K x 8) I2C EEPROM</li> <li>74HC4050D - 6-channel level shifter</li> <li>74LCX245MTC - 8-bit 5.0-3.3V level shifter</li> <li>93LC46B - 1K 16-Bit EEPROM (for FT2232H)</li> <li>A4983 - Stepper Motor Driver</li> <li>AD7780 - 24-Bit Sigma-Delta ADC with 128x PGA</li> <li>ADP3303 - High Accuracy 200 mA LDO</li> <li>ADXL345 - Digital Accelerometer</li> <li>ANT-868-SP - 868MHz SMT Antenna</li> <li>BMP085 - Digital Pressue Sensor</li> <li>FT2232H - Dual High-Speed USB to UART (LQFP64)</li> <li>ILI9481_LCD - 320x480 LCD</li> <li>ISL12022M - Temp Comp. RTC</li> <li>HMC5883L - Digital 3-Axis Compass</li> <li>ITG-3200 - Digital 3-Axis Gyroscope</li> <li>L3G2400D - 3-Axis I²C/SPI Gyroscope</li> <li>LAN8720 - 10/100 Ethernet PHY (QFN-24)</li> <li>LM4811 - Headphone Amplifier</li> <li>LOADCELL - Connectors for 4-wire load cells</li> <li>LPC1227/6/5/4 - Cortex M0 MCU</li> <li>LTC3581 - 3.3A Boost/Inverting DC/DC</li> <li>M25P16 - 16MBit Serial Flash (SPI)</li> <li>MAX3421E - USB Device/Host Controller</li> <li>MCP6022 - Dual 10MHz Op-Amp (SOIC8)</li> <li>MCP73871 - LIPO Battery Charger</li> <li>OL2381 - 315/434/868/915 MHz Transceiver</li> <li>PCF2129A - High Accuracy RTC w/Integrated Crystal</li> <li>SN74AUP - Tri-State Buffer</li> <li>SPX29302 - 3A 1% Adjustable LDO Regulator (TO263)</li> <li>STEREOJACK - 3.5mm Headphone Jack (Courtesy Adafruit)</li> <li>TPS61029 - Boost Converter/li> <li>TXS0102 - 2-Bit bi-directional level shifter (I2C)</li> <li>TXB0104PWR - 4-Bit bi-directional level shifter</li> <li>TXB0108PWR - 8-Bit bi-directional level shifter</li> <li>UPD5713TK - 50MHz-2.5GHz SPDT Switch</li> <li>VCNL4000 - Digital Proximity and Light Sensor</li> </ul> Parts Updated: <ul> <li>LPC1754 - Removed 1756+ pin labels (ENET+I2S)</li> <li>JST_2PIN - Added SH-type connector as well</li> <li>LED_RGB_PLCC6 - Changed to CREE CLV61-FKB</li> <li>TSL2561 - Added DFN footprint (CS obsolete)</li> </ul> <br/> </td> </tr> <tr> <td>1.06</td> <td>10 August 2010</td> <td> Parts Added: <ul> <li>ADM1191 - I2C Digital Power Monitor</li> <li>ADT7410 - 13-bit +/-0.5°C I2C Temp. Sensor</li> <li>DP83848 - 10/100 Ethernet Transceiver (40-LLP)</li> <li>ILI9325 - 2.8" TFT LCD w/Touch Screen</li> <li>LM358 - SOIC8 OP-AMP</li> <li>LM2671 - 500mA Switching Step-Down Voltage Regulator</li> <li>LPC1768 - 100MHz Cortex M3, 512KB Flash/64KB SRAM</li> <li>LPC313x/314x - ARM926EJ-S MCUs (TFBGA180)</li> <li>LTC3554 - USB Lipo Charger w/Dual Step-Down</li> <li>MBED - MBED footprint and pinout</li> <li>MIC5387 - 3 Output 150mA LDO</li> <li>MICROSD - uSD/Transflash Connector</li> <li>MOSFET-P - P-Channel MOSFET</li> <li>MT48H32M16LF - 512Mb Low-Power SDRAM (VFBGA54)</li> <li>OSCILLATOR - 5x7mm SMT Oscillator</li> <li>S1D13743 - TFT LCD Controller with 464K SRAM</li> <li>VREG_SOT23-5 - Single Part for SOT23-5 Linear Regulators</li> </ul> Parts Updated: <ul> <li>DCBarrel: Fixed reversed GND/GNDBreak pins on SMT version</li> </ul> <br/> </td> </tr> <tr> <td>1.05</td> <td>24 April, 2010</td> <td> Parts Added: <ul> <li>AT25040A - Atmel 1K/4K SPI EEPROM (SOIC8 and TSSOP8)</li> <li>BRIDGERECTIFIER - Comchip C4S-G 400V 800mA Peak 1.1V Vf</li> <li>DIODE-ZENER - Zener Diode</li> <li>FTDIUSBCABLE - Connector for FTDI's TTL-232R USB/RS232 Cable</li> <li>LED_RGB_PLCC4 - PLCC4 RGB LED (Common Anode)</li> <li>LPC1113/4_QFN - LPC1113/LPC1114 in QFN33</li> <li>LD39015xx - Ultra low dropout 150mA voltage regulator</li> <li>MCP24AA32 - Microchip 32K 1.8V I2C EEPROM (SOT23-5)</li> <li>PN532 - 13.56MHz contactless communication transceiver</li> <li>TRANSISTOR_NPN - 500mA 45V NPN Transistor (BC817)</li> </ul> <br/> </td> </tr> <tr> <td>1.04</td> <td>14 January, 2010</td> <td> Parts Added: <ul> <li>ANTENNA868MHZ - 868MHz SMT/Chip Antenna</li> <li>AT86RF212 - 700/800/900 MHz Transceiver</li> <li>BALUN - 800-1000 MHz (1206)</li> <li>BALUN+LP - 863-928 MHz Balun with Built-In LP Filter (0805)</li> <li>LOWPASSFILTER - 869MHz RF Low Pass Filter (0603)</li> <li>SMACONNECTOR - 90° DIP SMA Connector</li> </ul> <br/> </td> </tr> <tr> <td>1.03</td> <td>15 December 2009</td> <td> Parts Added: <ul> <li>BUTTON_SMT - 4-Pin soft-touch SMT button</li> <li>DIODE - Add SOD-323, SOD-523 Footprints</li> <li>FERRITE - 120 0hm, 600mA Ferrite Chip</li> <li>PSP_LCDOUTLINE - Dimensional Drawing for Sharp LQ043 LCD</li> <li>RJ45 - Ethernet Connector with LEDs and internal transformer</li> </ul> Parts Updated: <ul> <li>DCBARREL - SMT version updated to improve manufacturability (added tRestrict polygons)</li> <li>JTAG-CORTEXM3 - Footprints updated to correspond to real physical dimensions</li> </ul> <br/> </td> </tr> <tr> <td>1.02</td> <td>26 November 2009</td> <td> Parts Added: <ul> <li>BAT54C - 200mA 30V Dual Schottky Diode (Common Cathode) </li> <li>HEADER-1x20 - 1x20 2.54mm/0.1" Header Pins</li> <li>LPC2478 - 72MHz ARM7 MCU (QFP208 Package)</li> <li>LPC1113/4 - 50MHz Cortex M0 MCU (QFP48 Package)</li> <li>MAX1698 - Step-Up Current Regulator for LED Backlights</li> <li>MT48LC4M16A2P - Micron 64MB SDRAM (4Mb x 16)</li> <li>PTC - 100ma, 250ma and 750mA PTCs</li> </ul> <br/> </td> </tr> <tr> <td>1.01</td> <td>14 November 2009</td> <td> Parts Added: <ul> <li>NCP1400A - 100mA PWM Step-Up Regulator (3.3V and 5.0V SOT23-5)</li> <li>MIC5320 - Dual 150mA ULDO Linear Regulator</li> <li>INDUCTOR - 10µH, 22µH and 47µH 1007 Inductors</li> </ul> <br/> </td> </tr> <tr> <td>1.00</td> <td>12 November 2009</td> <td>Initial Release</td> </tr> </table> </p> <h3>License</h3> <p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> <p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. </p> 10-Lead Mini Small Outline Package [MSOP] >NAME >VALUE >NAME >VALUE 0805 (2012 Metric) >NAME >VALUE 1mm <b>FIDUCIAL MARKER</b><p> round, layers 1 + 16 + 21 + 39 + 49 0603-Mini <p>Mini footprint for dense boards</p> >NAME >VALUE >NAME >VALUE <b> 0402</b> >NAME >VALUE <b>0402 MicroPitch<p> >NAME >VALUE <b>0603</b> >NAME >VALUE <b>0603 MicroPitch</b> >NAME >VALUE <b>0805</b> >NAME >VALUE <b>0805 MicroPitch</b> >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE 0603 (1608 Metric) >NAME >VALUE 3,0 1,0 2,0 >NAME >VALUE >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE <p><b>Pin Headers</b><br/> 6 Pin, 0.1"/2.54mm pitch, SMT</p> <p>4UCON: 06676</p> >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE 4 Pin JST PH Series Female Connector<br/> Righ-Angle SMT >Name >Value >NAME <b>CHIPLED 1206</b> >NAME >VALUE A C <b>CHIPLED 0805</b> >NAME >VALUE A C <b>CHIPLED 0603</b> >NAME >VALUE >NAME >VALUE >NAME >VALUE A C <p>Source: http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/XLampXPE2.pdf</p> >NAME >VALUE >NAME >VALUE >NAME >VALUE <p>PLCC2 - Reverse Mount</p> <p>Source: http://catalog.osram-os.com/media/_en/Graphics/00042122_0.pdf</p> >NAME >VALUE >NAME >VALUE >NAME >VALUE <b>RESISTOR 2512 (Metric 6432)</b> >NAME >VALUE <b>Solder Jumper</b> - Reflow >NAME >VALUE <b>Solder Jumper</b> - Wave >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE >DRAWING_NAME >LAST_DATE_TIME >SHEET Sheet: Adafruit Industries Drawing: >AUTHOR ADS1015 12-Bit I²C ADC VDD: 2.0-5.5V Temp: -40-125°C >NAME >VALUE >NAME >VALUE >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE Frame A4 <b>ADS1015 - 12-bit 4-Channel I2C ADC with Internal PGA</b> <p> <ul> <li>VDD: 2.0-5.5V</li> <li>Sampling Rate: 3.3ksps</li> <li>Gain Settings: 2/3, 1, 2, 4, 8, 16</li> <li>I2C Address: ADDR low = 1001000x, ADDR high = 1001001x</li> </ul> </p> <p><b>Internal Comparator</b></p> <p>The ADS1015 includes an internal comparator that can be set to output a high-level on ALERT when the conversion results exceeeds a pre-defined upper level, and will deassert itself when the level falls below a pre-defined lower threshold level. It can also be set to windowed mode where the ALERT pin will be asserted if the data exceeds the upper threshold or falls below the lower threshold.</p> <p><b>Ceramic Capacitors</b></p> <p>For new designs, use the packages preceded by an '_' character since they are more reliable:</p> <p>The following footprints should be used on most boards:</p> <ul> <li><b>_0402</b> - Standard footprint for regular board layouts</li> <li><b>_0603</b> - Standard footprint for regular board layouts</li> <li><b>_0805</b> - Standard footprint for regular board layouts</li> <li><b>_1206</b> - Standard footprint for regular board layouts</li> </ul> <p>For extremely tight-pitch boards where space is at a premium, the following 'micro-pitch' footprints can be used (smaller pads, no silkscreen outline, etc.):</p> <ul> <li><b>_0402MP</b> - Micro-pitch footprint for very dense/compact boards</li> <li><b>_0603MP</b> - Micro-pitch footprint for very dense/compact boards</li> <li><b>_0805MP</b> - Micro-pitch footprint for very dense/compact boards</li> <li><b>_1206MP</b> - Micro-pitch footprint for very dense/compact boards</li> </ul> <b>GND</b> <p><b>Ferrite Bead</b></p> <p>0603</p> <ul> <li>MMZ1608B121C - 120 Ohm @ 100MHz, 600mA, 0.15 Ohm DC Resistance - Digikey: 445-2164-1-ND</li> <li>BK1608HW121-T - 120 Ohm, 600mA Ferrite Chip - Digikey: 587-1876-2-ND</li> </ul> <p>0805</p> <ul> <li>HZ0805B272R-10 - 2.7K Ohm @ 100MHz, 200mA, 0.8 Ohm DC Resistance - Digikey: 240-2504-1-ND (see also Murata BLM21BD272SN1L)</li> <li>MMZ2012Y152B - 1.5K Ohm @ 100MHz, 500mA, 0.4 Ohm DC Resistance - Digikey: 445-1560-1-ND - Mainly for high frequency (80-400MHz)</li> <li>MMZ2012R102A - 1K Ohm @ 100MHz, 500mA, 0.3 Ohm DC Resistance - Digikey: 445-1555-2-ND - More general purpose (10-200MHz)</li> </ul> <b>Mounting Hole</b> <p>For #2 screws (0.086"/2.18mm width, 0.094"/2.4mm hole) use 2.5mm</p> <b>Fiducial Alignment Points</b> <p>Various fiducial points for machine vision alignment.</p> <b>Resistor Packs (4 resistors)</b> <p><b>4 x 0603</b></p> <ul><li>10K 1/16W - Digikey: YC164J-10KCT-ND</li></ul> <b>PIN HEADER</b> <p><b>LED</b></p> <b>0603</b> - 0603 Surface Mount Package <hr> <p><b><u>2mA:</u></b></p> <ul> <li>Green LED - Low Power (3.9mcd, 2ma, 1.7Vf) - Digikey: 475-2709-2-ND</li> <li>Orange LED - Low Power (9.8mcd, 2ma, 1.8Vf) - Digikey: 475-1194-2-ND</li> <li>Red LED - Low Power (5mcd, 2ma, 1.8Vf) - Digikey: 475-1195-2-ND</li> <li>Yellow LED - Low Power (7mcd, 2ma, 1.8Vf) - Digikey: 475-1196-2-ND</li> </ul> <p><b><u>5mA:</u></b></p> <ul> <li>Blue LED - Low Power (17mcd, 5ma, 2.9Vf) - Digikey: LNJ937W8CRACT-ND</li> </ul> <b>0805</b> - 0805 Surface Mount Package <hr> <p><b><u>2mA:</u></b></p> <ul> <li>Red LED (8.8mcd, 2mA, 1.8Vf, Clear) - Low Power [Digikey: 475-2510-1-ND]</li> <li>Green LED (5mcd, 2mA, 1.8Vf, Clear) - Low Power [Digikey: 475-2730-1-ND]</li> <li>Yellow LED (11.3mcd, 2mA, 1.8Vf, Clear) - Low Power [Digikey: 475-2555-1-ND]</li> </ul> <p><b><u>20mA:</u></b></p> <ul> <li>Red LED (104mcd, 20mA, Diffused) - LS R976 [Digikey: 475-1278-6-ND]</li> <li>Red LED (12mcd, 20mA, 2.0Vf, Clear) - APT2012EC [Digikey: 754-1128-1-ND]</li> <li>Green LED (15mcd, 20mA, 2.2Vf, Clear) - APT2012GC [Digikey: 754-1131-1-ND]</li> <li>Orange LED (160mcd, 20mA, 2.1Vf, Clear) - APT2012SECK [Digikey: 754-1130-1-ND]</li> </ul> <li><b>1206</b> - 1206 Surface Mount Package <hr> <ul> <li>Green LED (26mcd, 20mA, Diffused) - LG N971 [Digikey: 475-1407-6-ND]</li> <li>Red LED (15mcd, 20mA, Diffused) - LH N974 [Digikey: 475-1416-6-ND]</li> </ul> <li><b>Cree</b> - Cree High-Power Surface Mount LEDs <hr> <ul> <li>XPEBWT-L1-0000-00D50 - White 111lm 350mA 2.9Vf 6200K 110°</li> <li>XTEAWT-00-0000-00000LEE3 - White 114lm 350mA 2.85Vf 5000K 115°</li> </ul> <li><b>Everlight</b> - Everlight 45-21 Series Surface Mount LEDs <hr> <ul> <li>45-21/QK2C-B2832AC2CB2/2T - Warm White 2000mcd 20mA 3.25Vf 3050K 120°</li> <li>45-21/LK2C-B38452C4CB2/2T - Nuetral White 2000mcd 20mA 3.25Vf 4150K 120°</li> <li>45-21/LK2C-B50634C6CB2/2T - Cold White 2200mcd 20mA 3.25Vf 5650K 120°</li> </ul> <li><b>PLCC2 Reverse Mount</b> <hr> <ul> <li>LS T77K-J1L2-1-0-2-R18-Z - Red 11.25mcd 2mA 1.8Vf 630nm 120°</li> <li>LO T77K-L1M2-24-Z - Orange 19.6mcd 2mA 1.8Vf 606nm 120°</li> <li>LY T77K-K2M1-26-Z - Yellow 15.7mcd 2mA 1.8Vf 587nm 120°</li> </ul> <p><b>Resistors</b></p> <p>For new designs, use the packages preceded by an '_' character since they are more reliable:</p> <p>The following footprints should be used on most boards:</p> <ul> <li><b>_0402</b> - Standard footprint for regular board layouts</li> <li><b>_0603</b> - Standard footprint for regular board layouts</li> <li><b>_0805</b> - Standard footprint for regular board layouts</li> <li><b>_1206</b> - Standard footprint for regular board layouts</li> </ul> <p>For extremely tight-pitch boards where space is at a premium, the following 'micro-pitch' footprints can be used (smaller pads, no silkscreen outline, etc.):</p> <ul> <li><b>_0402MP</b> - Micro-pitch footprint for very dense/compact boards</li> <li><b>_0603MP</b> - Micro-pitch footprint for very dense/compact boards</li> <li><b>_0805MP</b> - Micro-pitch footprint for very dense/compact boards</li> <li><b>_1206MP</b> - Micro-pitch footprint for very dense/compact boards</li> </ul> <p><b>SMD Solder JUMPER</b></p> <p>Solder the two pads together to create a connection, or remove the solder to break it.</p> <b>REFLOW</b> - Use this footprint for solder paste and reflow ovens.<br/> <b>WAVE</b> - Use this footprint for hand-soldering (larger pads). <p><b>CLOSED</b> - Has a trace between the two pads to ensure it is closed by default. The trace needs to be cut to disable the jumper, and can be closed again by creating a solder bridge between the two pads.</p> <b>Supply Symbols</b><p> GND, VCC, 0V, +5V, -5V, etc.<p> Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals.<p> The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE <b>SUPPLY SYMBOL</b> <b>SUPPLY SYMBOL</b> >VALUE >VALUE <b>Analog VDD</b> <b>Analog GND</b> STEMMA/I2C Headers ON LED Power supply Default I²C Address = 1001000 Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version.