Updating STEMMA

README.md

@@ -1,5 +1,6 @@
 ## Adafruit ADXL343 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI PCB
 
+<a href="http://www.adafruit.com/products/4097"><img src="assets/4097-qt.jpg?raw=true" width="500px"><br/>
 <a href="http://www.adafruit.com/products/4097"><img src="assets/4097.jpg?raw=true" width="500px"><br/>
 Click here to purchase one from the Adafruit shop</a>
 
@@ -16,6 +17,8 @@ The sensor has three axes of measurements, X Y Z, and pins that can be used eith
 
 We added an on-board 3.3V regulator and logic-level shifting circuitry, making it a perfect choice for interfacing with any 3V or 5V microcontroller or computer such as Arduino or Raspberry Pi. We've got both [Arduino (C/C++)](https://learn.adafruit.com/adxl343-breakout-learning-guide/arduino) and [CircuitPython (Python 3](https://learn.adafruit.com/adxl343-breakout-learning-guide/circuitpython)) libraries available so you can use it with any microcontroller like [Arduino, ESP8266, Metro, etc](https://learn.adafruit.com/adxl343-breakout-learning-guide/arduino) or with [Raspberry Pi or other Linux computers](https://learn.adafruit.com/adxl343-breakout-learning-guide/circuitpython) thanks to Blinka (our CircuitPython library support helper).
 
+As if that weren't enough, we've also added SparkFun qwiic compatible STEMMA QT connectors for the I2C bus so you don't even need to solder. Just wire up to your favorite micro with a plug-and-play cable to get accelerometer data ASAP. For a no-solder experience, just wire up to your favorite micro using a STEMMA QT adapter cable. The Stemma QT connectors also mean the ADXL can be used with our various associated accessories. QT Cable is not included, but we have a variety in the shop
+
 Each order comes with a fully tested and assembled breakout and some header for soldering to a PCB or breadboard. Comes with 9 pin 0.1" standard header in case you want to use it with a breadboard or perfboard. Two 2.5mm (0.1") mounting holes for easy attachment.You'll be up and running in under 5 minutes!
 
 [Thanks to Digi-Key](https://www.digikey.com/) and [Analog Devices](https://www.analog.com/en/index.html) for sponsoring the development of this breakout board - we've made the PCB "[Digi-Key red](https://www.digikey.com/)" in their honor!