adafruit-mirror/Adafruit_BMP5xx
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
Adafruit_BMP5xx/src/bmp5.h
Adafruit Developer 158e9af830 Update GitHub CI workflow to match Adafruit_AS5600 and apply clang formatting 
- Remove build matrix strategy to match reference workflow
- Downgrade action versions (checkout@v2, setup-python@v1)
- Reorder steps (setup-python first)
- Change platform test to use main_platforms instead of matrix variable
- Move clang step before test platforms step
- Apply clang formatting to all source files

🤖 Generated with [Claude Code](https://claude.ai/code)

Co-Authored-By: Claude <noreply@anthropic.com>
2025-08-10 08:49:15 -04:00

667 lines
22 KiB
C
Raw Blame History

/**
* Copyright (c) 2021 Bosch Sensortec GmbH. All rights reserved.
*
* BSD-3-Clause
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* @file bmp5.h
* @date 2021-08-27
* @version v1.0.5
*
*/
/*!
* @defgroup bmp5 BMP5
* @brief Sensor driver for BMP5 sensor
*/
#ifndef BMP5_H_
#define BMP5_H_
/*! CPP guard */
#ifdef __cplusplus
extern "C" {
#endif
/***************************************************************************/
/*! Header files
****************************************************************************/
#include "bmp5_defs.h"
/***************************************************************************/
/*! BMP5 User Interface function prototypes
****************************************************************************/
/**
* \ingroup bmp5
* \defgroup bmp5ApiInit Initialization
* @brief Initialize the sensor and device structure
*/
/*!
* \ingroup bmp5ApiInit
* \page bmp5_api_bmp5_init bmp5_init
* \code
* int8_t bmp5_init(struct bmp5_dev *dev);
* \endcode
* @details This API is the entry point. Call this API before using all other
* APIs. This API reads the chip-id of the sensor and sets the resolution,
* feature length and the type of variant.
*
* @param[in,out] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*
*/
int8_t bmp5_init(struct bmp5_dev* dev);
/**
* \ingroup bmp5
* \defgroup bmp5ApiRegister Registers
* @brief Generic API for accessing sensor registers
*/
/*!
* \ingroup bmp5ApiRegister
* \page bmp5_api_bmp5_get_regs bmp5_get_regs
* \code
* int8_t bmp5_get_regs(uint8_t reg_addr, uint8_t *data, uint32_t len, struct
* bmp5_dev *dev); \endcode
* @details This API reads the data from the given register address of sensor.
*
* @param[in] reg_addr : Register address from where the data to be read.
* @param[out] data : Pointer to data buffer to store the read data.
* @param[in] len : No of bytes of data to be read.
* @param[in,out] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_get_regs(uint8_t reg_addr, uint8_t* data, uint32_t len,
struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiRegister
* \page bmp5_api_bmp5_set_regs bmp5_set_regs
* \code
* int8_t bmp5_set_regs(uint8_t reg_addr, const uint8_t *data, uint32_t len,
* struct bmp5_dev *dev); \endcode
* @details This API writes the given data to the register address of sensor.
*
* @param[in] reg_addr : Register address where the data is to be written.
* @param[in] data : Pointer to data buffer, whose data is to be written
* in the sensor.
* @param[in] len : No of bytes of data to be writen.
* @param[in,out] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_set_regs(uint8_t reg_addr, const uint8_t* data, uint32_t len,
struct bmp5_dev* dev);
/**
* \ingroup bmp5
* \defgroup bmp5ApiSystem System
* @brief API that performs system-level operations
*/
/*!
* \ingroup bmp5ApiSystem
* \page bmp5_api_bmp5_soft_reset bmp5_soft_reset
* \code
* int8_t bmp5_soft_reset(struct bmp5_dev *dev);
* \endcode
* @details This API is used to soft-reset the sensor where all the registers
* are reset to their default values.
*
* @note If this register is set using I2C, an ACK will NOT be transmitted to
* the host.
*
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_soft_reset(struct bmp5_dev* dev);
/**
* \ingroup bmp5
* \defgroup bmp5ApiStatus NVM and Interrupt status
* @brief NVM and Interrupt status API
*/
/*!
* \ingroup bmp5ApiStatus
* \page bmp5_api_bmp5_get_interrupt_status bmp5_get_interrupt_status
* \code
* int8_t bmp5_get_interrupt_status(uint8_t *int_status, struct bmp5_dev *dev);
* \endcode
* @details This API is used to get the interrupt status (data ready interrupt,
*fifo full interrupt, fifo threshold interrupt, pressure out of range interrupt
*and power-on reset/software reset complete interrupt).
*
* @param[out] int_status : Variable to store interrupt status.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @note : Below are values of int_status possible.
*
*@verbatim
* Macros | Functionality
* -----------------------------------------|----------------------------
* BMP5_INT_ASSERTED_DRDY | Data ready interrupt asserted
* BMP5_INT_ASSERTED_FIFO_FULL | Fifo full interrupt asserted
* BMP5_INT_ASSERTED_FIFO_THRES | Fifo threshold interrupt asserted
* BMP5_INT_ASSERTED_PRESSURE_OOR | Pressure out of range interrupt
*asserted BMP5_INT_ASSERTED_POR_SOFTRESET_COMPLETE | Power-on reset/Software
*reset complete interrupt asserted
*@endverbatim
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_get_interrupt_status(uint8_t* int_status, struct bmp5_dev* dev);
/**
* \ingroup bmp5
* \defgroup bmp5ApiPowermode Powermode
* @brief Powermode of the sensor API
*/
/*!
* \ingroup bmp5ApiPowermode
* \page bmp5_api_bmp5_set_power_mode bmp5_set_power_mode
* \code
* int8_t bmp5_set_power_mode(enum bmp5_powermode powermode, struct bmp5_dev
**dev); \endcode
* @details This API sets the power mode of the sensor.
*
* @param[in] powermode : Select powermode.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @note Below mentioned are the possible powermode that can be set by the user.
*
*@verbatim
* powermode | Macros
* -----------------|-------------------
* 0 | BMP5_POWERMODE_STANBY
* 1 | BMP5_POWERMODE_NORMAL
* 2 | BMP5_POWERMODE_FORCED
* 3 | BMP5_POWERMODE_CONTINOUS
* 4 | BMP5_POWERMODE_DEEP_STANBY
*@endverbatim
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_set_power_mode(enum bmp5_powermode powermode, struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiPowermode
* \page bmp5_api_bmp5_get_power_mode bmp5_get_power_mode
* \code
* int8_t bmp5_get_power_mode(enum bmp5_powermode *powermode, struct bmp5_dev
**dev); \endcode
* @details This API gets the power mode of the sensor.
*
* @param[out] powermode : To store the power mode.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @note Below mentioned are the possible powermode from the sensor
*
*@verbatim
* powermode | Macros
* -----------------|-------------------
* 0 | BMP5_POWERMODE_STANBY
* 1 | BMP5_POWERMODE_NORMAL
* 2 | BMP5_POWERMODE_FORCED
* 3 | BMP5_POWERMODE_CONTINOUS
* 4 | BMP5_POWERMODE_DEEP_STANBY
*@endverbatim
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_get_power_mode(enum bmp5_powermode* powermode,
struct bmp5_dev* dev);
/**
* \ingroup bmp5
* \defgroup bmp5ApiData Sensor Data
* @brief Get Sensor data
*/
/*!
* \ingroup bmp5ApiData
* \page bmp5_api_bmp5_get_sensor_data bmp5_get_sensor_data
* \code
* int8_t bmp5_get_sensor_data(struct bmp5_sensor_data *sensor_data,
* const struct bmp5_osr_odr_press_config
* *osr_odr_press_cfg, struct bmp5_dev *dev); \endcode
* @details This API reads the temperature(deg C) or both pressure(Pa) and
* temperature(deg C) data from the sensor and store it in the bmp5_sensor_data
* structure instance passed by the user.
*
* @param[out] sensor_data : Structure instance of bmp5_sensor_data.
* @param[in] osr_odr_press_cfg : Structure instance of
* bmp5_osr_odr_press_config.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @note If fixed point(BMP5_USE_FIXED_POINT) is selected then data return type
* is uin64_t for pressure and int64_t for temperature. While for floating
* point(BMP5_USE_FLOATING_POINT) data return type is float for pressure and
* temperature.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_get_sensor_data(
struct bmp5_sensor_data* sensor_data,
const struct bmp5_osr_odr_press_config* osr_odr_press_cfg,
struct bmp5_dev* dev);
/**
* \ingroup bmp5
* \defgroup bmp5ApiInterrupt Interrupt
* @brief Interrupt API
*/
/*!
* \ingroup bmp5ApiInterrupt
* \page bmp5_api_bmp5_int_source_select bmp5_int_source_select
* \code
* int8_t bmp5_int_source_select(const struct bmp5_int_source_select
* *int_source_select, struct bmp5_dev *dev); \endcode
* @details This API is used to enable the interrupts(drdy interrupt, fifo full
* interrupt, fifo threshold enable and pressure data out of range interrupt).
*
* @param[in] int_source_select : Structure instance of bmp5_int_enable.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_int_source_select(
const struct bmp5_int_source_select* int_source_select,
struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiInterrupt
* \page bmp5_api_bmp5_configure_interrupt bmp5_configure_interrupt
* \code
* int8_t bmp5_configure_interrupt(enum bmp5_intr_mode int_mode,
* enum bmp5_intr_polarity int_pol,
* enum bmp5_intr_drive int_od,
* enum bmp5_intr_en_dis int_en,
* struct bmp5_dev *dev);
* \endcode
* @details This API is used to configure the interrupt settings.
*
* @param[in] int_mode : Sets either latched or pulsed.
* @param[in] int_pol : Sets either polarity high or low.
* @param[in] int_od : Sets either open drain or push pull.
* @param[in] int_en : Enable/ Disable interrupt pin.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_configure_interrupt(enum bmp5_intr_mode int_mode,
enum bmp5_intr_polarity int_pol,
enum bmp5_intr_drive int_od,
enum bmp5_intr_en_dis int_en,
struct bmp5_dev* dev);
/**
* \ingroup bmp5
* \defgroup bmp5ApiSettings Settings
* @brief Get/set sensor settings APIs
*/
/*!
* \ingroup bmp5ApiSettings
* \page bmp5_api_bmp5_get_osr_odr_press_config bmp5_get_osr_odr_press_config
* \code
* int8_t bmp5_get_osr_odr_press_config(struct bmp5_osr_odr_press_config
* *osr_odr_press_cfg, struct bmp5_dev *dev); \endcode
* @details This API gets the configuration for oversampling of temperature,
* oversampling of pressure and ODR configuration for normal mode along with
* pressure enable.
*
* @param[out] osr_odr_press_cfg : Structure instance of
* bmp5_osr_odr_press_config.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_get_osr_odr_press_config(
struct bmp5_osr_odr_press_config* osr_odr_press_cfg, struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiSettings
* \page bmp5_api_bmp5_set_osr_odr_press_config bmp5_set_osr_odr_press_config
* \code
* int8_t bmp5_set_osr_odr_press_config(const struct bmp5_osr_odr_press_config
* *osr_odr_press_cfg, struct bmp5_dev *dev); \endcode
* @details This API sets the configuration for oversampling of temperature,
* oversampling of pressure and ODR configuration along with pressure enable.
*
* @param[in] osr_odr_press_cfg : Structure instance of
* bmp5_osr_odr_press_config.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @note If ODR is set to a value higher than 5Hz then powermode is set as
* standby mode, as ODR value greater than 5HZ without disabling deep-standby
* mode makes powermode invalid.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_set_osr_odr_press_config(
const struct bmp5_osr_odr_press_config* osr_odr_press_cfg,
struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiSettings
* \page bmp5_api_bmp5_get_iir_config bmp5_get_iir_config
* \code
* int8_t bmp5_get_iir_config(struct bmp5_iir_config *iir_cfg, struct bmp5_dev
* *dev); \endcode
* @details This API gets the configuration for IIR of temperature and pressure.
*
* @param[out] iir_cfg : Structure instance of bmp5_iir_config.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_get_iir_config(struct bmp5_iir_config* iir_cfg,
struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiSettings
* \page bmp5_api_bmp5_set_iir_config bmp5_set_iir_config
* \code
* int8_t bmp5_set_iir_config(const struct bmp5_iir_config *iir_cfg, struct
* bmp5_dev *dev); \endcode
* @details This API sets the configuration for IIR of temperature and pressure.
*
* @note
* 1. The IIR configuration can be performed only in standby mode. So in this
* API before updating IIR configuration powermode is switched to standby mode
* and reverted back to earlier powermode after IIR configuration is updated.
* 2. If IIR value for both temperature and pressure is set a value other than
* bypass then powermode is set as standby mode, as IIR with value other than
* bypass without disabling deep-standby mode makes powermode invalid.
*
* @param[in] iir_cfg : Structure instance of bmp5_iir_config.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_set_iir_config(const struct bmp5_iir_config* iir_cfg,
struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiSettings
* \page bmp5_api_bmp5_get_osr_odr_eff bmp5_get_osr_odr_eff
* \code
* int8_t bmp5_get_osr_odr_eff(struct bmp5_osr_odr_eff *osr_odr_eff, struct
* bmp5_dev *dev); \endcode
* @details This API gets the configuration for effective OSR of temperature,
* effective OSR of pressure and ODR valid status.
*
* @param[out] osr_odr_eff : Structure instance of bmp5_osr_odr_eff.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_get_osr_odr_eff(struct bmp5_osr_odr_eff* osr_odr_eff,
struct bmp5_dev* dev);
/**
* \ingroup bmp5
* \defgroup bmp5ApiFIFO FIFO
* @brief FIFO operations of the sensor
*/
/*!
* \ingroup bmp5ApiFIFO
* \page bmp5_api_bmp5_get_fifo_configuration bmp5_get_fifo_configuration
* \code
* int8_t bmp5_get_fifo_configuration(struct bmp5_fifo *fifo, struct bmp5_dev
* *dev); \endcode
* @details This API used to get the configurations of fifo from the sensor.
*
* @param[out] fifo : Structure instance of bmp5_fifo.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_get_fifo_configuration(struct bmp5_fifo* fifo,
struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiFIFO
* \page bmp5_api_bmp5_set_fifo_configuration bmp5_set_fifo_configuration
* \code
* int8_t bmp5_set_fifo_configuration(const struct bmp5_fifo *fifo, struct
* bmp5_dev *dev); \endcode
* @details This API used to set the configurations of fifo in the sensor.
*
* @param[in] fifo : Structure instance of bmp5_fifo.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @note If Fifo frame selection is enabled then powermode is set as standby
* mode, as fifo frame selection enabled without disabling deep-standby mode
* makes powermode invalid.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_set_fifo_configuration(const struct bmp5_fifo* fifo,
struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiFIFO
* \page bmp5_api_bmp5_get_fifo_len bmp5_get_fifo_len
* \code
* int8_t bmp5_get_fifo_len(uint8_t *fifo_len, struct bmp5_fifo *fifo, struct
* bmp5_dev *dev); \endcode
* @details This API is used to get the length of fifo from the sensor.
*
* @param[out] fifo_len : Variable to store fifo length.
* @param[out] fifo : Structure instance of bmp5_fifo.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_get_fifo_len(uint16_t* fifo_len, struct bmp5_fifo* fifo,
struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiFIFO
* \page bmp5_api_bmp5_get_fifo_data bmp5_get_fifo_data
* \code
* int8_t bmp5_get_fifo_data(struct bmp5_fifo *fifo, struct bmp5_dev *dev);
* \endcode
* @details This API is used to get the fifo data from the sensor.
*
* @param[out] fifo : Structure instance of bmp5_fifo.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_get_fifo_data(struct bmp5_fifo* fifo, struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiFIFO
* \page bmp5_api_bmp5_extract_fifo_data bmp5_extract_fifo_data
* \code
* int8_t bmp5_extract_fifo_data(const struct bmp5_fifo *fifo, struct
* bmp5_sensor_data *sensor_data); \endcode
* @details This API extract the temperature and/or pressure data from the fifo
* data which is already read from the fifo.
*
* @param[in] fifo : Structure instance of bmp5_fifo.
* @param[out] sensor_data : Structure instance of bmp5_sensor_data.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_extract_fifo_data(const struct bmp5_fifo* fifo,
struct bmp5_sensor_data* sensor_data);
/**
* \ingroup bmp5
* \defgroup bmp5ApiOOR OOR pressure
* @brief OOR pressure API
*/
/*!
* \ingroup bmp5ApiOOR
* \page bmp5_api_bmp5_get_oor_configuration bmp5_get_oor_configuration
* \code
* int8_t bmp5_get_oor_configuration(struct bmp5_oor_press_configuration
* *oor_press_config, struct bmp5_dev *dev); \endcode
* @details This API gets the configuration for out-of-range pressure threshold,
* range count limit and IIR.
*
* @param[out] oor_press_config : Structure instance of
* bmp5_oor_press_configuration.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_get_oor_configuration(
struct bmp5_oor_press_configuration* oor_press_config,
struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiOOR
* \page bmp5_api_bmp5_set_oor_configuration bmp5_set_oor_configuration
* \code
* int8_t bmp5_set_oor_configuration(const struct bmp5_oor_press_configuration
* *oor_press_config, struct bmp5_dev *dev); \endcode
* @details This API sets the configuration for out-of-range pressure threshold,
* range count limit and IIR.
*
* @param[in] oor_press_config : Structure instance of
* bmp5_oor_press_configuration.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_set_oor_configuration(
const struct bmp5_oor_press_configuration* oor_press_config,
struct bmp5_dev* dev);
/**
* \ingroup bmp5
* \defgroup bmp5ApiNVM NVM
* @brief NVM operation of the sensor
*/
/*!
* \ingroup bmp5ApiNVM
* \page bmp5_api_bmp5_nvm_read bmp5_nvm_read
* \code
* int8_t bmp5_nvm_read(uint8_t nvm_addr, uint16_t *nvm_data, struct bmp5_dev
* *dev); \endcode
* @details This API is used to perform NVM read.
*
* @param[in] nvm_addr : Variable that holds the nvm address.
* @param[out] nvm_data : Variable to store nvm data.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_nvm_read(uint8_t nvm_addr, uint16_t* nvm_data,
struct bmp5_dev* dev);
/*!
* \ingroup bmp5ApiNVM
* \page bmp5_api_bmp5_nvm_write bmp5_nvm_write
* \code
* int8_t bmp5_nvm_write(uint8_t nvm_addr, const uint16_t *nvm_data, struct
* bmp5_dev *dev); \endcode
* @details This API used to perform NVM write.
*
* @param[in] nvm_addr : Variable that holds the nvm address.
* @param[in] nvm_data : Variable that holds the nvm data.
* @param[in] dev : Structure instance of bmp5_dev.
*
* @return Result of API execution status.
* @return 0 -> Success
* @return < 0 -> Fail
*/
int8_t bmp5_nvm_write(uint8_t nvm_addr, const uint16_t* nvm_data,
struct bmp5_dev* dev);
#ifdef __cplusplus
}
#endif /* End of CPP guard */
#endif /* End of header guard macro */
Reference in a new issue View git blame Copy permalink