Remove SSD1681B
This commit is contained in:
Melissa LeBlanc-Williams
parent
3040121a5d
commit
7753b3e6d3
2 changed files with 0 additions and 171 deletions
|
|
@ -1,169 +0,0 @@
|
|||
# SPDX-FileCopyrightText: 2018 Dean Miller for Adafruit Industries
|
||||
#
|
||||
# SPDX-License-Identifier: MIT
|
||||
|
||||
"""
|
||||
`adafruit_epd.ssd1681` - Adafruit SSD1681 - ePaper display driver
|
||||
====================================================================================
|
||||
CircuitPython driver for Adafruit SSD1681 display breakouts
|
||||
* Author(s): Dean Miller, Ladyada
|
||||
"""
|
||||
|
||||
import time
|
||||
from micropython import const
|
||||
import adafruit_framebuf
|
||||
from adafruit_epd.epd import Adafruit_EPD
|
||||
|
||||
__version__ = "0.0.0-auto.0"
|
||||
__repo__ = "https://github.com/adafruit/Adafruit_CircuitPython_EPD.git"
|
||||
|
||||
_SSD1681_DRIVER_CONTROL = const(0x01)
|
||||
_SSD1681_GATE_VOLTAGE = const(0x03)
|
||||
_SSD1681_SOURCE_VOLTAGE = const(0x04)
|
||||
_SSD1681_INIT_SETTING = const(0x08)
|
||||
_SSD1681_INIT_WRITE_REG = const(0x09)
|
||||
_SSD1681_INIT_READ_REG = const(0x0A)
|
||||
_SSD1681_BOOSTER_SOFT_START = const(0x0C)
|
||||
_SSD1681_DEEP_SLEEP = const(0x10)
|
||||
_SSD1681_DATA_MODE = const(0x11)
|
||||
_SSD1681_SW_RESET = const(0x12)
|
||||
_SSD1681_HV_DETECT = const(0x14)
|
||||
_SSD1681_VCI_DETECT = const(0x15)
|
||||
_SSD1681_TEMP_CONTROL = const(0x18)
|
||||
_SSD1681_TEMP_WRITE = const(0x1A)
|
||||
_SSD1681_TEMP_READ = const(0x1B)
|
||||
_SSD1681_EXTTEMP_WRITE = const(0x1C)
|
||||
_SSD1681_MASTER_ACTIVATE = const(0x20)
|
||||
_SSD1681_DISP_CTRL1 = const(0x21)
|
||||
_SSD1681_DISP_CTRL2 = const(0x22)
|
||||
_SSD1681_WRITE_BWRAM = const(0x24)
|
||||
_SSD1681_WRITE_REDRAM = const(0x26)
|
||||
_SSD1681_READ_RAM = const(0x27)
|
||||
_SSD1681_VCOM_SENSE = const(0x28)
|
||||
_SSD1681_VCOM_DURATION = const(0x29)
|
||||
_SSD1681_WRITE_VCOM_OTP = const(0x2A)
|
||||
_SSD1681_WRITE_VCOM_CTRL = const(0x2B)
|
||||
_SSD1681_WRITE_VCOM_REG = const(0x2C)
|
||||
_SSD1681_READ_OTP = const(0x2D)
|
||||
_SSD1681_READ_USERID = const(0x2E)
|
||||
_SSD1681_READ_STATUS = const(0x2F)
|
||||
_SSD1681_WRITE_WS_OTP = const(0x30)
|
||||
_SSD1681_LOAD_WS_OTP = const(0x31)
|
||||
_SSD1681_WRITE_LUT = const(0x32)
|
||||
_SSD1681_CRC_CALC = const(0x34)
|
||||
_SSD1681_CRC_READ = const(0x35)
|
||||
_SSD1681_PROG_OTP = const(0x36)
|
||||
_SSD1681_WRITE_DISPLAY_OPT = const(0x37)
|
||||
_SSD1681_WRITE_USERID = const(0x38)
|
||||
_SSD1681_OTP_PROGMODE = const(0x39)
|
||||
_SSD1681_WRITE_BORDER = const(0x3C)
|
||||
_SSD1681_END_OPTION = const(0x3F)
|
||||
_SSD1681_SET_RAMXPOS = const(0x44)
|
||||
_SSD1681_SET_RAMYPOS = const(0x45)
|
||||
_SSD1681_AUTOWRITE_RED = const(0x46)
|
||||
_SSD1681_AUTOWRITE_BW = const(0x47)
|
||||
_SSD1681_SET_RAMXCOUNT = const(0x4E)
|
||||
_SSD1681_SET_RAMYCOUNT = const(0x4F)
|
||||
_SSD1681_NOP = const(0xFF)
|
||||
|
||||
_LUT_DATA = b'\x02\x02\x01\x11\x12\x12""fiiYX\x99\x99\x88\x00\x00\x00\x00\xf8\xb4\x13Q5QQ\x19\x01\x00' # pylint: disable=line-too-long
|
||||
|
||||
|
||||
class Adafruit_SSD1681(Adafruit_EPD):
|
||||
"""driver class for Adafruit SSD1681 ePaper display breakouts"""
|
||||
|
||||
# pylint: disable=too-many-arguments
|
||||
def __init__(
|
||||
self, width, height, spi, *, cs_pin, dc_pin, sramcs_pin, rst_pin, busy_pin
|
||||
):
|
||||
super().__init__(
|
||||
width, height, spi, cs_pin, dc_pin, sramcs_pin, rst_pin, busy_pin
|
||||
)
|
||||
|
||||
if height % 8 != 0:
|
||||
height += 8 - height % 8
|
||||
self._height = height
|
||||
|
||||
self._buffer1_size = int(width * height / 8)
|
||||
|
||||
if sramcs_pin:
|
||||
self._buffer1 = self.sram.get_view(0)
|
||||
else:
|
||||
self._buffer1 = bytearray((width * height) // 8)
|
||||
self._framebuf1 = adafruit_framebuf.FrameBuffer(
|
||||
self._buffer1, width, height, buf_format=adafruit_framebuf.MHMSB
|
||||
)
|
||||
self.set_black_buffer(0, True)
|
||||
self.set_color_buffer(0, True)
|
||||
# pylint: enable=too-many-arguments
|
||||
|
||||
def begin(self, reset=True):
|
||||
"""Begin communication with the display and set basic settings"""
|
||||
if reset:
|
||||
self.hardware_reset()
|
||||
self.power_down()
|
||||
|
||||
def busy_wait(self):
|
||||
"""Wait for display to be done with current task, either by polling the
|
||||
busy pin, or pausing"""
|
||||
if self._busy:
|
||||
while self._busy.value:
|
||||
time.sleep(0.01)
|
||||
else:
|
||||
time.sleep(0.5)
|
||||
|
||||
def power_up(self):
|
||||
"""Power up the display in preparation for writing RAM and updating"""
|
||||
self.hardware_reset()
|
||||
self.busy_wait()
|
||||
self.command(_SSD1681_SW_RESET)
|
||||
self.busy_wait()
|
||||
# driver output control
|
||||
self.command(
|
||||
_SSD1681_DRIVER_CONTROL,
|
||||
bytearray([self._width - 1, (self._width - 1) >> 8, 0x00]),
|
||||
)
|
||||
# data entry mode
|
||||
self.command(_SSD1681_DATA_MODE, bytearray([0x03]))
|
||||
# Set ram X start/end postion
|
||||
self.command(_SSD1681_SET_RAMXPOS, bytearray([0x00, self._height // 8 - 1]))
|
||||
# Set ram Y start/end postion
|
||||
self.command(
|
||||
_SSD1681_SET_RAMYPOS,
|
||||
bytearray([0, 0, self._height - 1, (self._height - 1) >> 8]),
|
||||
)
|
||||
# Set border waveform
|
||||
self.command(_SSD1681_WRITE_BORDER, bytearray([0x05]))
|
||||
# Set temperature control
|
||||
self.command(_SSD1681_TEMP_CONTROL, bytearray([0x80]))
|
||||
|
||||
self.busy_wait()
|
||||
|
||||
def power_down(self):
|
||||
"""Power down the display - required when not actively displaying!"""
|
||||
self.command(_SSD1681_DEEP_SLEEP, bytearray([0x01]))
|
||||
time.sleep(0.1)
|
||||
|
||||
def update(self):
|
||||
"""Update the display from internal memory"""
|
||||
self.command(_SSD1681_DISP_CTRL2, bytearray([0xF7]))
|
||||
self.command(_SSD1681_MASTER_ACTIVATE)
|
||||
self.busy_wait()
|
||||
if not self._busy:
|
||||
time.sleep(3) # wait 3 seconds
|
||||
|
||||
def write_ram(self, index):
|
||||
"""Send the one byte command for starting the RAM write process. Returns
|
||||
the byte read at the same time over SPI. index is the RAM buffer, can be
|
||||
0 or 1 for tri-color displays."""
|
||||
if index == 0:
|
||||
return self.command(_SSD1681_WRITE_BWRAM, end=False)
|
||||
raise RuntimeError("RAM index must be 0")
|
||||
|
||||
def set_ram_address(self, x, y): # pylint: disable=unused-argument, no-self-use
|
||||
"""Set the RAM address location, not used on this chipset but required by
|
||||
the superclass"""
|
||||
# Set RAM X address counter
|
||||
self.command(_SSD1681_SET_RAMXCOUNT, bytearray([x]))
|
||||
# Set RAM Y address counter
|
||||
self.command(_SSD1681_SET_RAMYCOUNT, bytearray([y >> 8, y]))
|
||||
|
|
@ -16,7 +16,6 @@ from adafruit_epd.ssd1608 import Adafruit_SSD1608 # pylint: disable=unused-impo
|
|||
from adafruit_epd.ssd1675 import Adafruit_SSD1675 # pylint: disable=unused-import
|
||||
from adafruit_epd.ssd1675b import Adafruit_SSD1675B # pylint: disable=unused-import
|
||||
from adafruit_epd.ssd1681 import Adafruit_SSD1681 # pylint: disable=unused-import
|
||||
from adafruit_epd.ssd1681b import Adafruit_SSD1681B # pylint: disable=unused-import
|
||||
|
||||
# create the spi device and pins we will need
|
||||
spi = busio.SPI(board.SCK, MOSI=board.MOSI, MISO=board.MISO)
|
||||
|
|
@ -33,7 +32,6 @@ busy = digitalio.DigitalInOut(board.D7) # can be None to not use this pin
|
|||
# give them all to our driver
|
||||
print("Creating display")
|
||||
# display = Adafruit_SSD1608(200, 200, # 1.54" HD mono display
|
||||
# display = Adafruit_SSD1681B(200, 200, # 1.54" HD mono display (alt)
|
||||
# display = Adafruit_SSD1681(200, 200, # 1.54" HD Tri-color display
|
||||
# display = Adafruit_SSD1675(122, 250, # 2.13" HD mono display
|
||||
# display = Adafruit_IL91874(176, 264, # 2.7" Tri-color display
|
||||
|
|
|
|||
Loading…
Reference in a new issue