71 lines
2 KiB
Python
71 lines
2 KiB
Python
# SPDX-FileCopyrightText: 2021 ladyada for Adafruit Industries
|
|
# SPDX-License-Identifier: MIT
|
|
|
|
import board
|
|
import busio
|
|
import digitalio
|
|
|
|
# Define radio parameters.
|
|
RADIO_FREQ_MHZ = 915.0 # Frequency of the radio in Mhz. Must match your
|
|
# module! Can be a value like 915.0, 433.0, etc.
|
|
|
|
# Define pins connected to the chip, use these if wiring up the breakout according to the guide:
|
|
CS = digitalio.DigitalInOut(board.CE1)
|
|
RESET = digitalio.DigitalInOut(board.D25)
|
|
|
|
# Initialize SPI bus.
|
|
spi = busio.SPI(board.SCK, MOSI=board.MOSI, MISO=board.MISO)
|
|
|
|
# Initialze RFM radio
|
|
# uncommnet the desired import and rfm initialization depending on the radio boards being used
|
|
|
|
# Use rfm9x for two RFM9x radios using LoRa
|
|
|
|
from adafruit_rfm import rfm9x
|
|
|
|
rfm = rfm9x.RFM9x(spi, CS, RESET, RADIO_FREQ_MHZ)
|
|
|
|
# Use rfm9xfsk for two RFM9x radios or RFM9x to RFM69 using FSK
|
|
|
|
# from adafruit_rfm import rfm9xfsk
|
|
|
|
# rfm = rfm9xfsk.RFM9xFSK(spi, CS, RESET, RADIO_FREQ_MHZ)
|
|
|
|
# Use rfm69 for two RFM69 radios using FSK
|
|
|
|
# from adafruit_rfm import rfm69
|
|
|
|
# rfm = rfm69.RFM69(spi, CS, RESET, RADIO_FREQ_MHZ)
|
|
|
|
# For RFM69 only: Optionally set an encryption key (16 byte AES key). MUST match both
|
|
# on the transmitter and receiver (or be set to None to disable/the default).
|
|
# rfm.encryption_key = None
|
|
# rfm.encryption_key = (
|
|
# b"\x01\x02\x03\x04\x05\x06\x07\x08\x01\x02\x03\x04\x05\x06\x07\x08"
|
|
# )
|
|
|
|
# for OOK on RFM69 or RFM9xFSK
|
|
# rfm.modulation_type = 1
|
|
|
|
# set node addresses
|
|
rfm.node = 100
|
|
rfm.destination = 0xFF
|
|
# send startup message from my_node
|
|
rfm.send(
|
|
bytes(f"startup message from base {rfm.node}", "UTF-8"),
|
|
keep_listening=True,
|
|
)
|
|
# Wait to receive packets.
|
|
print("Waiting for packets...")
|
|
# initialize flag and timer
|
|
|
|
|
|
while True:
|
|
if rfm.payload_ready():
|
|
packet = rfm.receive_with_ack(with_header=True, timeout=None)
|
|
if packet is not None:
|
|
# Received a packet!
|
|
# Print out the raw bytes of the packet:
|
|
print(f"Received (raw bytes): {packet}")
|
|
print([hex(x) for x in packet])
|
|
print(f"RSSI: {rfm.last_rssi}")
|