75 lines
2.1 KiB
Python
75 lines
2.1 KiB
Python
# SPDX-FileCopyrightText: 2017 Scott Shawcroft, written for Adafruit Industries
|
|
# SPDX-FileCopyrightText: Copyright (c) 2021 Melissa LeBlanc-Williams for Adafruit Industries
|
|
#
|
|
# SPDX-License-Identifier: Unlicense
|
|
|
|
"""Simple test script for 2.13" 250x122 tri-color display.
|
|
Supported products:
|
|
* Adafruit 2.13" Tri-Color eInk Display Breakout
|
|
* https://www.adafruit.com/product/4947
|
|
* Adafruit 2.13" Tri-Color eInk Display FeatherWing
|
|
* https://www.adafruit.com/product/4814
|
|
* Adafruit 2.13" Mono eInk Display Breakout
|
|
* https://www.adafruit.com/product/4197
|
|
* Adafruit 2.13" Mono eInk Display FeatherWing
|
|
* https://www.adafruit.com/product/4195
|
|
|
|
"""
|
|
|
|
import time
|
|
|
|
import board
|
|
import displayio
|
|
from fourwire import FourWire
|
|
|
|
import adafruit_ssd1680
|
|
|
|
displayio.release_displays()
|
|
|
|
# This pinout works on a Metro M4 and may need to be altered for other boards.
|
|
spi = board.SPI() # Uses SCK and MOSI
|
|
epd_cs = board.D9
|
|
epd_dc = board.D10
|
|
epd_reset = board.D8 # Set to None for FeatherWing
|
|
epd_busy = board.D7 # Set to None for FeatherWing
|
|
|
|
display_bus = FourWire(spi, command=epd_dc, chip_select=epd_cs, reset=epd_reset, baudrate=1000000)
|
|
time.sleep(1)
|
|
|
|
# For issues with display not updating top/bottom rows correctly set colstart to 8, 0, or -8
|
|
display = adafruit_ssd1680.SSD1680(
|
|
display_bus,
|
|
width=250,
|
|
height=122,
|
|
busy_pin=epd_busy,
|
|
highlight_color=0xFF0000,
|
|
rotation=270,
|
|
colstart=-8, # Comment out for older displays
|
|
)
|
|
|
|
|
|
g = displayio.Group()
|
|
|
|
# Note: Check the name of the file. Sometimes the dash is changed to an underscore
|
|
|
|
pic = displayio.OnDiskBitmap("/display-ruler.bmp")
|
|
t = displayio.TileGrid(pic, pixel_shader=pic.pixel_shader)
|
|
g.append(t)
|
|
|
|
display.root_group = g
|
|
|
|
display.refresh()
|
|
|
|
print("refreshed")
|
|
|
|
time.sleep(display.time_to_refresh + 5)
|
|
# Always refresh a little longer. It's not a problem to refresh
|
|
# a few seconds more, but it's terrible to refresh too early
|
|
# (the display will throw an exception when if the refresh
|
|
# is too soon)
|
|
print("waited correct time")
|
|
|
|
|
|
# Keep the display the same
|
|
while True:
|
|
time.sleep(10)
|