Merge pull request #161 from bradrblack/WiFiManager-Example

Adding WiFiManager Example Sketches

examples/adafruitio_27_wifimanager/.metro_m4_airliftlite.test.skip

@@ -0,0 +1 @@
+

examples/adafruitio_27_wifimanager/.pyportal.test.skip

@@ -0,0 +1 @@
+

examples/adafruitio_27_wifimanager/adafruitio_27_wifimanager.ino

@@ -0,0 +1,80 @@
+/* Adafruit IO Example Using WiFiManager
+ *
+ * This is a simple Adafruit feed subscribe example that uses
+ * WiFiManager to handle setup of WiFi credentials and connecting
+ * to the network instead of defining the WiFI SSID and password
+ * explicitly in the code.
+ *
+ * To use this example, add your Adafruit IO Username and Key
+ * and setup a feed called "myfeed".  When you manually add data
+ * to the feed on io.adafruit.com, you'll see that data written to
+ * the serial output.
+ *
+ * Brad Black - 2022
+ *
+ */
+
+#include <WiFiManager.h>
+#include "AdafruitIO_WiFi.h"
+
+char IO_USERNAME[64] = "my username";
+char IO_KEY[64] = "my key";
+AdafruitIO_WiFi io(IO_USERNAME, IO_KEY, "", "");
+AdafruitIO_Feed *myfeed = io.feed("myfeed");
+
+WiFiManager wifiManager;
+
+void handleMessage(AdafruitIO_Data *data)
+{
+
+  Serial.print("received <- ");
+  Serial.println(data->toString());
+
+} // handleMessage
+
+void setup()
+
+{
+  Serial.begin(115200); // Initialize serial port for debugging.
+  delay(500);
+
+  // wifiManager.resetSettings();  //uncomment to reset the WiFi settings
+
+  wifiManager.setClass("invert");          // enable "dark mode" for the config portal
+  wifiManager.setConfigPortalTimeout(120); // auto close configportal after n seconds
+  wifiManager.setAPClientCheck(true);      // avoid timeout if client connected to softap
+
+  if (!wifiManager.autoConnect("WiFi Setup"))   // connect to wifi with existing setting or start config
+  {
+    Serial.println("failed to connect and hit timeout");
+  }
+  else
+  {
+    // if you get here you have connected to the WiFi
+    Serial.println("Connected to WiFi.");
+
+    Serial.printf("Connecting to Adafruit IO with User: %s Key: %s.\n", IO_USERNAME, IO_KEY);
+    io.connect();
+
+    myfeed->onMessage(handleMessage);
+
+    myfeed->get();
+
+    // wait for a connection
+
+    while ((io.status() < AIO_CONNECTED))
+    {
+      Serial.print(".");
+      delay(500);
+    }
+    Serial.println("Connected to Adafruit IO.");
+  }
+
+} // setup()
+
+void loop()
+{
+
+  io.run();
+
+} // loop()

examples/adafruitio_28_wifimanager-custom-aio-parameters/.metro_m4_airliftlite.test.skip

@@ -0,0 +1 @@
+

examples/adafruitio_28_wifimanager-custom-aio-parameters/.pyportal.test.skip

@@ -0,0 +1 @@
+

examples/adafruitio_28_wifimanager-custom-aio-parameters/adafruitio_28_wifimanager-custom-aio-parameters.ino

@@ -0,0 +1,192 @@
+/* Adafruit IO Example Using WiFiManager with Custom Adafruit IO parameters
+ *
+ * This is a simple Adafruit feed subscribe example that uses
+ * WiFiManager to handle setup of WiFi credentials and connecting
+ * to the network instead of defining the WiFI SSID and password
+ * explicitly in the code.
+ *
+ * In addition, this example allows you to enter your Adafruit IO username and key
+ * as customer parameters in WiFiManager so that they do not need to be coded into
+ * the sketch.
+ * 
+ * This is useful if you want to create projects and share them with others that
+ * may use them on a different WiFi network and use a different Adafruit IO account
+ * for IOT integrations such as collecting sensor data or voice command integration via
+ * IFFT.
+ *
+ * To use this example, setup a feed called "myfeed".  When the ESP8266 or ESP32
+ * microcontroller starts, join the "WiFi Setup" SSID and you should be presented
+ * with the config portal.  If the config portal does not automatically start you
+ * can browse to http://192.168.4.1 to access it
+ *
+ * Select the SSID and enter the password for WiFi Access in the config portal.
+ * Enter your Adafruit IO username and key in the config portal and select "Save".
+ *
+ * When you manually add data to the feed on io.adafruit.com, you'll see
+ * that data written to the serial output.
+ *
+ * Brad Black - 2022
+ *
+ */
+
+#include <WiFiManager.h>
+#include "AdafruitIO_WiFi.h"
+#include <ArduinoJson.h>
+#include <LittleFS.h>
+
+char IO_USERNAME[64] = "";
+char IO_KEY[64] = "";
+
+static uint8_t objStorage[sizeof(AdafruitIO_WiFi)]; // RAM for the object
+AdafruitIO_WiFi *io;                                // a pointer to the object, once it's constructed
+
+// create WiFiManager object and define our custom parameters
+
+WiFiManager wifiManager;
+WiFiManagerParameter custom_IO_USERNAME("iouser", "Adafruit IO Username", IO_USERNAME, 60);
+WiFiManagerParameter custom_IO_KEY("iokey", "Adafruit IO Key", IO_KEY, 60);
+
+void handleMessage(AdafruitIO_Data *data)
+{
+
+  Serial.print("received <- ");
+  Serial.println(data->toString());
+
+} // handleMessage
+
+// callback notifying us of the need to save config
+void saveConfigCallback()
+{
+
+  Serial.println("Saving new config");
+
+  strcpy(IO_USERNAME, custom_IO_USERNAME.getValue());
+  strcpy(IO_KEY, custom_IO_KEY.getValue());
+
+  DynamicJsonDocument json(256);
+
+  json["IO_KEY"] = IO_KEY;
+  json["IO_USERNAME"] = IO_USERNAME;
+
+  File configFile = LittleFS.open("/config.json", "w");
+  if (!configFile)
+  {
+    Serial.println("Failed to open config file for writing");
+  }
+
+  serializeJson(json, Serial);
+
+  serializeJson(json, configFile);
+
+  configFile.close();
+} // end save
+
+void readParamsFromFS()
+{
+  if (LittleFS.begin())
+  {
+
+    if (LittleFS.exists("/config.json"))
+    {
+      // file exists, reading and loading
+      Serial.println("Reading config file");
+
+      File configFile = LittleFS.open("/config.json", "r");
+      if (configFile)
+      {
+        size_t size = configFile.size();
+        // Allocate a buffer to store contents of the file.
+        std::unique_ptr<char[]> buf(new char[size]);
+
+        configFile.readBytes(buf.get(), size);
+
+        DynamicJsonDocument json(256);
+        auto deserializeError = deserializeJson(json, buf.get());
+        serializeJson(json, Serial);
+        Serial.println();
+        if (!deserializeError)
+        {
+
+          if (json.containsKey("IO_USERNAME"))
+            strcpy(IO_USERNAME, json["IO_USERNAME"]);
+          if (json.containsKey("IO_KEY"))
+            strcpy(IO_KEY, json["IO_KEY"]);
+        }
+        else
+        {
+          Serial.println("Failed to load json config");
+        }
+        configFile.close();
+      }
+    }
+
+    else
+    {
+      Serial.println("Failed to mount FS");
+    }
+  }
+}
+void setup()
+
+{
+  Serial.begin(115200); // Initialize serial port for debugging.
+  delay(500);
+  WiFi.begin();
+
+  readParamsFromFS(); // get parameters from file system
+
+  //wifiManager.resetSettings();  //uncomment to reset the WiFi settings
+
+  wifiManager.setClass("invert");          // enable "dark mode" for the config portal
+  wifiManager.setConfigPortalTimeout(120); // auto close configportal after n seconds
+  wifiManager.setAPClientCheck(true);      // avoid timeout if client connected to softap
+
+  wifiManager.addParameter(&custom_IO_USERNAME); // set custom paraeter for IO username
+  wifiManager.addParameter(&custom_IO_KEY);      // set custom parameter for IO key
+
+  custom_IO_KEY.setValue(IO_KEY, 64);           // set custom parameter value
+  custom_IO_USERNAME.setValue(IO_USERNAME, 64); // set custom parameter value
+
+  wifiManager.setSaveConfigCallback(saveConfigCallback); // set config save notify callback
+
+  if (!wifiManager.autoConnect("WiFi Setup")) // connect to wifi with existing setting or start config
+  {
+    Serial.println("Failed to connect and hit timeout");
+  }
+  else
+  {
+    // if you get here you have connected to the WiFi
+    Serial.println("Connected to WiFi.");
+
+    // connect to Adafruit IO
+
+    io = new (objStorage) AdafruitIO_WiFi(IO_USERNAME, IO_KEY, "", "");
+
+    Serial.printf("Connecting to Adafruit IO with User: %s Key: %s.\n", IO_USERNAME, IO_KEY);
+
+    io->connect();
+
+    AdafruitIO_Feed *myfeed = io->feed("myfeed");
+
+    myfeed->onMessage(handleMessage);
+
+    myfeed->get();
+
+    // wait for a connection
+
+    while ((io->status() < AIO_CONNECTED))
+    {
+      Serial.print(".");
+      delay(500);
+    }
+    Serial.println("Connected to Adafruit IO.");
+  }
+
+} // setup()
+
+void loop()
+{
+
+  io->run();
+
+} // loop()

library.properties

@@ -1,5 +1,5 @@
 name=Adafruit IO Arduino
-version=4.2.2
+version=4.2.3
 author=Adafruit
 maintainer=Adafruit <adafruitio@adafruit.com>
 sentence=Arduino library to access Adafruit IO.
@@ -7,4 +7,4 @@ paragraph=Arduino library to access Adafruit IO using the Adafruit AirLift, ESP8
 category=Communication
 url=https://github.com/adafruit/Adafruit_IO_Arduino
 architectures=*
-depends=Adafruit MQTT Library, ArduinoHttpClient, Adafruit Unified Sensor, Adafruit NeoPixel, DHT sensor library, Ethernet, Adafruit Si7021 Library, Adafruit SGP30 Sensor, Adafruit BME280 Library, Adafruit LIS3DH, Adafruit VEML6070 Library, ESP32Servo
+depends=Adafruit MQTT Library, ArduinoHttpClient, Adafruit Unified Sensor, Adafruit NeoPixel, DHT sensor library, Ethernet, Adafruit Si7021 Library, Adafruit SGP30 Sensor, Adafruit BME280 Library, Adafruit LIS3DH, Adafruit VEML6070 Library, ESP32Servo, WiFiManager, ArduinoJson