linting

Adafruit_pIRKey/NEC_keyboard_example.py

@@ -2,6 +2,7 @@
 # When used with the Adafruit NEC remote will act like a keyboard and
 # type out keypresses.
 
+import time
 import adafruit_irremote
 from adafruit_hid.keyboard import Keyboard
 from adafruit_hid.keycode import Keycode
@@ -9,7 +10,6 @@ from adafruit_hid.keyboard_layout_us import KeyboardLayoutUS
 import adafruit_dotstar
 import pulseio
 import board
-import time
 
 led = adafruit_dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1)
 
@@ -73,4 +73,3 @@ while True:
         led[0] = (100, 0, 0)                           # flash red
         print("Failed to decode: ", e.args)
     print("----------------------------")
-

Adafruit_pIRKey/NEC_print_example.py

@@ -31,4 +31,3 @@ while True:
         print("Failed to decode: ", e.args)
 
 print("----------------------------")
-

Adafruit_pIRKey/main.py

@@ -3,7 +3,6 @@
 
 import pulseio
 import board
-import time
 import adafruit_dotstar
 import adafruit_irremote
 

Adafruit_pIRKey/raw_code_keyboard/main.py

@@ -18,7 +18,7 @@ decoder = adafruit_irremote.GenericDecode()
 pulsein = pulseio.PulseIn(board.REMOTEIN, maxlen=100, idle_state=True)
 
 # Expected pulse, pasted in from previous recording REPL session:
-key1_pulses = [0
+key1_pulses = [0]
 
 key2_pulses = [1]
 

Animatronic_Hand/binary_counting.py

@@ -1,5 +1,6 @@
 #  Animatronic Hand
 #  Binary Counting on four fingers up to 15
+import time
 from digitalio import DigitalInOut, Direction, Pull
 import audioio
 from adafruit_seesaw.seesaw import Seesaw
@@ -7,7 +8,6 @@ from adafruit_seesaw.pwmout import PWMOut
 from adafruit_motor import servo
 from busio import I2C
 import board
-import time
 
 # Create I2C and seesaw objuect
 i2c = I2C(board.SCL, board.SDA)

CircuitPy_OTP/main.py

@@ -8,6 +8,8 @@ import ntptime
 import ubinascii
 import uhashlib
 
+# pylint: disable=broad-except
+
 # https://github.com/pyotp/pyotp example
 totp = [("Discord ", 'JBSWY3DPEHPK3PXP'),
         ("Gmail   ", 'abcdefghijklmnopqrstuvwxyz234567'),

CircuitPython_TVBGone/cpx_main.py

@@ -4,7 +4,7 @@ import time
 import board
 import pulseio
 from digitalio import DigitalInOut, Direction, Pull
-
+# pylint: disable=eval-used
 # Switch to select 'stealth-mode'
 switch = DigitalInOut(board.SLIDE_SWITCH)
 switch.direction = Direction.INPUT

CircuitPython_TVBGone/gemma_main.py

@@ -7,6 +7,8 @@ import board
 import pulseio
 from digitalio import DigitalInOut, Direction
 
+# pylint: disable=eval-used
+
 pixel = adafruit_dotstar.DotStar(
     board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
 pixel.fill((0, 0, 0))

Crickit_Stumblebot/code.py

@@ -64,8 +64,8 @@ def servo_back(direction):
 print("Its Stumble Bot Time")
 
 while True:
-    if button_A.value:     # If button A is pressed, start bot
-        led.value = True   # Turn on LED 13 to show we're gone!
+    if button_A.value:  # If button A is pressed, start bot
+        led.value = True  # Turn on LED 13 to show we're gone!
         for i in range(5):
             print("back 1")
             servo_back(1)