update code

FONA_SMS_Sensor/code.py

@@ -34,7 +34,7 @@ notification_buf = bytearray(64)
 print("FONA Ready!")
 while True:
     if fona.in_waiting: # data is available from FONA
-        notification_buf = fona._read_line()[1]
+        notification_buf = fona.read_line()[1]
         # Split out the sms notification slot num.
         notification_buf = notification_buf.decode()
         sms_slot = notification_buf.split(",")[1]
@@ -51,20 +51,30 @@ while True:
         humid = bme280.humidity
         pres = bme280.pressure
 
+        # sanitize message
         message = message.lower()
-        print('MSG: ', message)
+        message = message.strip()
 
-        if message in ['temp', 'temperature']:
+        if message in ['temp', 'temperature', 't']:
             response = "Temperature: %0.1f C" % temp
-        elif message in ['humid', 'humidity']:
+        elif message in ['humid', 'humidity', 'h']:
             response = "Humidity: %0.1f %%" % humid
-        elif message in ['pres', 'pressure']:
+        elif message in ['pres', 'pressure', 'p']:
             response = "Pressure: %0.1f hPa" % pres
-        elif message in ['state', 'status']:
+        elif message in ['status', 's']:
             response = "Temperature: {0:.2f}C\nHumidity: {1:.1f}% \
                      Pressure: {2:.1f}hPa".format(temp, humid, pres)
+        elif message in ['help']:
+            response = "I'm a SMS Sensor - txt me with a command:\
+                        TEMP - Read temperature\
+                        HUMID - Read humidity\
+                        PRES - Read pressure\
+                        STATUS - Read all sensors.\
+                        HELP - List commands"
         else:
-            response = "Incorrect message format received"
+            response = "Incorrect message format received. \
+                        Text HELP to this number for a list of commands."
+
 
         print("Sending response: ", response)
 

code.py

@@ -1,82 +0,0 @@
-import time
-import board
-import busio
-import digitalio
-from adafruit_fona.adafruit_fona import FONA
-import adafruit_bme280
-
-print("FONA SMS Sensor")
-
-# Create a serial connection for the FONA connection
-uart = busio.UART(board.TX, board.RX)
-rst = digitalio.DigitalInOut(board.D5)
-
-# Initialize FONA module (this may take a few seconds)
-fona = FONA(uart, rst, debug=True)
-
-# Initialize BME280 Sensor
-i2c = busio.I2C(board.SCL, board.SDA)
-bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c)
-
-# Initialize Network
-while fona.network_status != 1:
-    print("Connecting to network...")
-    time.sleep(1)
-print("Connected to network!")
-print("RSSI: %ddB" % fona.rssi)
-
-# Enable FONA SMS notification
-fona.enable_sms_notification = True
-
-# store incoming notification info
-notification_buf = bytearray(64)
-
-print("FONA Ready!")
-while True:
-    if fona.in_waiting: # data is available from FONA
-        notification_buf = fona._read_line()[1]
-        # Split out the sms notification slot num.
-        notification_buf = notification_buf.decode()
-        sms_slot = notification_buf.split(",")[1]
-
-        print("NEW SMS!\n\t Slot: ", sms_slot)
-
-        # Get SMS message and address
-        sender, message = fona.read_sms(sms_slot)
-        print("FROM: ", sender)
-        print("MSG: ", message)
-
-        # Read BME280 sensor values
-        temp = bme280.temperature
-        humid = bme280.humidity
-        pres = bme280.pressure
-
-        # sanitize message 
-        message = message.lower()
-        message = message.strip()
-
-        if message in ['temp', 'temperature']:
-            response = "Temperature: %0.1f C" % temp
-        elif message in ['humid', 'humidity']:
-            response = "Humidity: %0.1f %%" % humid
-        elif message in ['pres', 'pressure']:
-            response = "Pressure: %0.1f hPa" % pres
-        elif message in ['state', 'status']:
-            response = "Temperature: {0:.2f}C\nHumidity: {1:.1f}% \
-                     Pressure: {2:.1f}hPa".format(temp, humid, pres)
-        else:
-            response = "Incorrect message format received"
-
-
-        print("Sending response: ", response)
-
-        # Send a response back to the sender
-        print("Sending response...")
-        if not fona.send_sms(int(sender), response):
-            print("SMS Send Failed")
-        print("SMS Sent!")
-
-        # Delete the original message
-        if not fona.delete_sms(sms_slot):
-            print("Could not delete SMS in slot", sms_slot)
-        print("OK!")