moving code to main repo

Twitch_On_Air_Sign/ESP8266_OnAirSign/ESP8266_OnAirSign.ino

@@ -0,0 +1,107 @@
+/*
+ *  Simple HTTP get webclient test
+ */
+
+#include <ESP8266WiFi.h>
+#include <Adafruit_NeoPixel.h>
+
+const char* ssid     = "ssid";
+const char* password = "password";
+
+#define HOST "api.twitch.tv"
+#define PATH "/kraken/streams/adafruit"
+#define REFRESH 30  // seconds between refresh
+#define LED 13
+#define PIN 12
+Adafruit_NeoPixel strip = Adafruit_NeoPixel(60, PIN, NEO_GRB + NEO_KHZ800);
+
+// Fill the dots one after the other with a color
+void colorWipe(uint32_t c, uint8_t wait) {
+  for(uint16_t i=0; i<strip.numPixels(); i++) {
+    strip.setPixelColor(i, c);
+    strip.show();
+    delay(wait);
+  }
+}
+
+void setup() {
+  Serial.begin(115200);
+  delay(100);
+
+  // We start by connecting to a WiFi network
+
+  Serial.println();
+  Serial.println();
+  Serial.print("Connecting to ");
+  Serial.println(ssid);
+  
+  WiFi.begin(ssid, password);
+  
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+
+  Serial.println("");
+  Serial.println("WiFi connected");  
+  Serial.println("IP address: ");
+  Serial.println(WiFi.localIP());
+
+  strip.begin();
+}
+
+int value = 0;
+
+void loop() {
+  ++value;
+
+  Serial.print("connecting to ");
+  Serial.println(HOST);
+  
+  // Use WiFiClient class to create TCP connections
+  WiFiClientSecure client;
+  if (!client.connect(HOST, 443)) {
+    Serial.println("connection failed");
+    colorWipe(strip.Color(0, 0, 0), 50); // Off
+    return;
+  }
+  
+  // We now create a URI for the request
+  Serial.print("Requesting URL: ");
+  Serial.println(PATH);
+  
+  // This will send the request to the server
+  client.print(String("GET ") + PATH + " HTTP/1.1\r\n" +
+               "Host: " + HOST + "\r\n" + 
+               "Connection: close\r\n\r\n");
+
+  int32_t timeout = millis() + 1000;
+  while (client.available() == 0) { 
+    if (timeout - millis() < 0) { 
+      Serial.println(">>> Client Timeout !"); 
+      client.stop(); 
+      colorWipe(strip.Color(0, 0, 0), 50); // Off
+      return;
+    }
+  }
+  
+  boolean isStreaming = false;
+  while (client.connected()) {
+    if (client.find("\"stream\":{\"_id\":")) {
+      isStreaming = true;
+    }
+  }
+
+  Serial.print("Streaming status: "); Serial.println(isStreaming);
+  digitalWrite(LED, isStreaming);
+  if (isStreaming) {
+    colorWipe(strip.Color(255, 0, 0), 50); // Red
+  } else {
+    colorWipe(strip.Color(0, 0, 0), 50); // Off
+  }
+  Serial.println("disconnecting from server.");
+  client.stop();
+
+  delay(REFRESH*1000);
+}
+

Twitch_On_Air_Sign/ReadMe.txt

@@ -0,0 +1 @@
+Check out the tutorial at https://learn.adafruit.com/automatic-twitch-on-air-sign/

Twitch_On_Air_Sign/WINC1500_OnAirSign/WINC1500_OnAirSign.ino

@@ -0,0 +1,134 @@
+#include <SPI.h>
+#include <Adafruit_WINC1500.h>
+#include <Adafruit_NeoPixel.h>
+
+#define PIN 12
+Adafruit_NeoPixel strip = Adafruit_NeoPixel(30, PIN, NEO_GRBW + NEO_KHZ800);
+
+
+// Define the WINC1500 board connections below.
+// If you're following the Adafruit WINC1500 board
+// guide you don't need to modify these:
+#define WINC_CS   8
+#define WINC_IRQ  7
+#define WINC_RST  4
+#define WINC_EN   2     // or, tie EN to VCC and comment this out
+
+#define LED 13
+
+// Setup the WINC1500 connection with the pins above and the default hardware SPI.
+Adafruit_WINC1500 WiFi(WINC_CS, WINC_IRQ, WINC_RST);
+
+// Or just use hardware SPI (SCK/MOSI/MISO) and defaults, SS -> #10, INT -> #7, RST -> #5, EN -> 3-5V
+//Adafruit_WINC1500 WiFi;
+
+char ssid[] = "ssid"; //  your network SSID (name)
+char pass[] = "password";    // your network password (use for WPA, or use as key for WEP)
+int keyIndex = 0;            // your network key Index number (needed only for WEP)
+
+int status = WL_IDLE_STATUS;
+#define HOST "api.twitch.tv"
+#define PATH "/kraken/streams/adafruit"
+#define REFRESH 20  // seconds between refresh
+
+Adafruit_WINC1500SSLClient client;
+
+// Fill the dots one after the other with a color
+void colorWipe(uint32_t c, uint8_t wait) {
+  for(uint16_t i=0; i<strip.numPixels(); i++) {
+    strip.setPixelColor(i, c);
+    strip.show();
+    delay(wait);
+  }
+}
+
+void setup() {
+#ifdef WINC_EN
+  pinMode(WINC_EN, OUTPUT);
+  digitalWrite(WINC_EN, HIGH);
+#endif
+
+  pinMode(LED, OUTPUT);
+  
+  //Initialize serial and wait for port to open:
+  Serial.begin(9600);
+
+strip.begin();
+
+  // check for the presence of the shield:
+  if (WiFi.status() == WL_NO_SHIELD) {
+    Serial.println("WiFi shield not present");
+    // don't continue:
+    while (true);
+  }
+}
+
+void loop() {
+  // attempt to connect to Wifi network:
+  if (WiFi.status() != WL_CONNECTED) {
+    while (WiFi.status() != WL_CONNECTED) {
+      Serial.print("Attempting to connect to SSID: ");
+      Serial.println(ssid);
+      // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
+      status = WiFi.begin(ssid, pass);
+  
+      // wait 10 seconds for connection:
+      uint8_t timeout = 10;
+      while (timeout && (WiFi.status() != WL_CONNECTED)) {
+        timeout--;
+        delay(1000);
+      }
+    }
+  
+    Serial.println("Connected to wifi");
+    printWifiStatus();
+  }
+  
+  Serial.println("\nStarting connection to twitch...");
+  // if you get a connection, report back via serial:
+  if (client.connect(HOST, 443)) {
+    Serial.println("connected to twitch api server");
+    // Make a HTTP request:
+    client.println("GET " PATH " HTTP/1.1");
+    client.println("Host: " HOST);
+    client.println("Connection: close");
+    client.println();
+  }
+
+  boolean isStreaming = false;
+  while (client.connected()) {
+    if (client.find("\"stream\":{\"_id\":")) {
+      isStreaming = true;
+    }
+  }
+
+  Serial.print("Streaming status: "); Serial.println(isStreaming);
+  digitalWrite(LED, isStreaming);
+  if (isStreaming) {
+    colorWipe(strip.Color(255, 0, 0), 50); // Red
+  } else {
+    colorWipe(strip.Color(10, 10, 10), 50); // Off
+  }
+  Serial.println("disconnecting from server.");
+  client.stop();
+
+  delay(REFRESH*1000);
+}
+
+
+void printWifiStatus() {
+  // print the SSID of the network you're attached to:
+  Serial.print("SSID: ");
+  Serial.println(WiFi.SSID());
+
+  // print your WiFi shield's IP address:
+  IPAddress ip = WiFi.localIP();
+  Serial.print("IP Address: ");
+  Serial.println(ip);
+
+  // print the received signal strength:
+  long rssi = WiFi.RSSI();
+  Serial.print("signal strength (RSSI):");
+  Serial.print(rssi);
+  Serial.println(" dBm");
+}