diff --git a/WiFi_Mailbox_Notifier/code.py b/WiFi_Mailbox_Notifier/mailbox_code/code.py
similarity index 100%
rename from WiFi_Mailbox_Notifier/code.py
rename to WiFi_Mailbox_Notifier/mailbox_code/code.py
diff --git a/WiFi_Mailbox_Notifier/reed_switch_code/code.py b/WiFi_Mailbox_Notifier/reed_switch_code/code.py
new file mode 100644
index 000000000..b64a9a558
--- /dev/null
+++ b/WiFi_Mailbox_Notifier/reed_switch_code/code.py
@@ -0,0 +1,77 @@
+# SPDX-FileCopyrightText: 2022 Brian Rossman
+# SPDX-FileCopyrightText: 2022 Kattni Rembor for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""
+A CircuitPython program to identify reed switch terminals on a switch with three
+terminals (normally closed, normally open, and common). This code is not designed
+for two terminal reed switches.
+"""
+import time
+import board
+import digitalio
+import supervisor
+
+# Update these pins to match the pins to which you connected the reed switch.
+TERMINAL_ONE = board.D14
+TERMINAL_TWO = board.D32
+TERMINAL_THREE = board.D15
+
+# Create digital pin objects using the pins defined above.
+pin_1 = digitalio.DigitalInOut(TERMINAL_ONE)
+pin_2 = digitalio.DigitalInOut(TERMINAL_TWO)
+pin_3 = digitalio.DigitalInOut(TERMINAL_THREE)
+
+# Wait for the serial connection to be established.
+while not supervisor.runtime.serial_connected:
+    time.sleep(0.25)
+time.sleep(1)
+
+# Prompt and wait for confirmation the magnet is NOT near the reed switch.
+print("Ensure no magnet is near the reed switch.")
+print("Press ENTER to continue")
+input()  # Waits for you to press enter to continue.
+
+# Set Terminal 1 as the only output.
+pin_1.switch_to_output()
+
+# Set Terminal 2 & 3 as inputs to detect connectivity.
+pin_2.switch_to_input(pull=digitalio.Pull.UP)
+pin_3.switch_to_input(pull=digitalio.Pull.UP)
+
+# Set the output pin to False.
+pin_1.value = False
+
+# Negate pin logic due to use of pull-up.
+ab_common = not pin_2.value
+ac_common = not pin_3.value
+
+# Prompt and wait for confirmation the magnet IS near the reed switch.
+print("Place the magnet against the reed switch.")
+print("Press ENTER to continue")
+input()  # Waits for you to press enter to continue.
+
+# Negate pin logic due to use of pull-up.
+b_when_closed = not pin_2.value
+c_when_closed = not pin_3.value
+
+# Print pin assignments for reference.
+print(f"Terminal pin assignments:\nTerminal 1 = {TERMINAL_ONE}" +
+      f"\nTerminal 2 = {TERMINAL_TWO}\nTerminal 3 = {TERMINAL_THREE}\n")
+
+# Print which terminal is Normally Closed, Common, and Normally Open.
+if ab_common and not ac_common and not b_when_closed and not c_when_closed:
+    print("Normally Closed: Terminal 1, Common: Terminal 2, Normally Open: Terminal 3")
+elif not ab_common and ac_common and not b_when_closed and not c_when_closed:
+    print("Normally Closed: Terminal 1, Common: Terminal 3, Normally Open: Terminal 2")
+elif ab_common and not ac_common and not b_when_closed and c_when_closed:
+    print("Normally Closed: Terminal 2, Common: Terminal 1, Normally Open: Terminal 3")
+elif not ab_common and not ac_common and not b_when_closed and c_when_closed:
+    print("Normally Closed: Terminal 2, Common: Terminal 3, Normally Open: Terminal 1")
+elif not ab_common and ac_common and b_when_closed and not c_when_closed:
+    print("Normally Closed: Terminal 3, Common: Terminal 1, Normally Open: Terminal 2")
+elif not ab_common and not ac_common and b_when_closed and not c_when_closed:
+    print("Normally Closed: Terminal 3, Common: Terminal 2, Normally Open: Terminal 1")
+else:
+    # All options are covered above. If none are valid, there may be an issue with your wiring.
+    print("Something went wrong, check connections and try again.")