removed code

ComboDialSafe/main.py

@@ -1,92 +0,0 @@
-# CPX Combo Safe
-from adafruit_circuitplayground.express import cpx
-import time
-import board
-import simpleio
-
-#  plug red servo wire to VOUT, brown to GND, yellow to A3
-servo = simpleio.Servo(board.A3)
-
-def dialCircle(R, G, B):
-    for i in range(10):
-        cpx.pixels[i] = ((R, G, B))
-        time.sleep(.01)
-
-cpx.pixels.brightness = 0.1  # set brightness value
-
-correctCombo = ['A', 'D', 'A']  # this is where to set the combo
-enteredCombo = []  # this will be used to store attempts
-currentDialPosition = 'X'
-
-def unlockServo():
-    servo.angle = 180
-
-def lockServo():
-    servo.angle = 0
-
-while True:
-    cpx.red_led = 0  # turn off the on board LED
-
-    xF, yF, zF = cpx.acceleration  # read acceleromter
-    x = int(xF)  # make int of it
-    y = int(yF)
-    z = int(zF)
-
-    # four simple rotation positions, A-D
-    # the combination entries are based on which letter is facing up
-    #
-    #              A
-    #            .___.
-    #         .         .
-    #     D  .           .  B
-    #        .           .
-    #         .         .
-    #            .|_|.
-    #              C
-
-    if x == 0 and y == 9:
-        currentDialPosition = 'A'  # used to store dial position
-        dialCircle(25, 25, 0)
-
-    if x == 9 and y == 0:
-        currentDialPosition = 'B'
-        dialCircle(25, 0, 25)
-
-    if x == 0 and y == -9:
-        currentDialPosition = 'C'
-        dialCircle(0, 0, 50)
-
-    if x == -9 and y == 0:
-        currentDialPosition = 'D'
-        dialCircle(0, 25, 25)
-
-    # press the left button to enter the current position as a combo entry
-    if cpx.button_a is True:  # this means the button has been pressed
-        cpx.red_led = 1  # turn on the on-board LED
-        # grab the currentDialPosition value and add to the list
-        enteredCombo.append(currentDialPosition)
-        dialMsg = 'Dial Position: ' + str(enteredCombo[(len(enteredCombo)-1)])
-        print(dialMsg)
-        time.sleep(1)  # slow down button checks
-
-    # press the right button to lock the servo
-    if cpx.button_b:  # this is a more Pythonic way to check button status
-        cpx.red_led = 1
-        dialCircle(47, 23, 40)
-        lockServo()
-        time.sleep(1)
-
-    if len(enteredCombo) == 3:
-        # print('full')
-        if enteredCombo == correctCombo:  # they match!
-            print('Correct! Unlocked.')
-            dialCircle(0, 100, 0)
-            unlockServo()
-            time.sleep(3)
-            enteredCombo = []  # clear this for next time around
-
-        else:
-            print('Incorret combination.')
-            dialCircle(100, 0, 0)
-            time.sleep(3)
-            enteredCombo = []  # clear this for next time around