Code for tutorial in Arduino
This commit is contained in:
Mike Barela
GitHub
parent
a384907671
commit
3e10a0b83d
6 changed files with 1086 additions and 4 deletions
|
|
@ -0,0 +1,423 @@
|
||||||
|
#include <WiFi.h>
|
||||||
|
#include <PubSubClient.h>
|
||||||
|
#include "config.h"
|
||||||
|
#include <Adafruit_Crickit.h>
|
||||||
|
#include <seesaw_servo.h>
|
||||||
|
#include <seesaw_motor.h>
|
||||||
|
#include <seesaw_neopixel.h>
|
||||||
|
|
||||||
|
#define NEOPIX_PIN (20) /* Neopixel pin */
|
||||||
|
#define NEOPIX_NUMBER_OF_PIXELS (7)
|
||||||
|
#define LUX CRICKIT_SIGNAL1
|
||||||
|
#define PIR CRICKIT_SIGNAL3
|
||||||
|
#define DOOR CRICKIT_SIGNAL5
|
||||||
|
#define chip_name "CrickitOIT_1"
|
||||||
|
|
||||||
|
Adafruit_Crickit crickit;
|
||||||
|
seesaw_Servo myservo(&crickit); // create servo object to control a servo
|
||||||
|
seesaw_Motor motor_a(&crickit);
|
||||||
|
seesaw_NeoPixel strip = seesaw_NeoPixel(NEOPIX_NUMBER_OF_PIXELS, NEOPIX_PIN, NEO_GRB + NEO_KHZ800);
|
||||||
|
|
||||||
|
//****************************** MQTT TOPICS
|
||||||
|
|
||||||
|
//***** Door Lock
|
||||||
|
#define MQTTlock "house/lock"
|
||||||
|
//***** Window Fan
|
||||||
|
#define MQTTfan "house/fan"
|
||||||
|
#define MQTTfanSpeed "house/fan/speed"
|
||||||
|
//***** RGB LED 1
|
||||||
|
#define MQTTled1 "house/led/one"
|
||||||
|
#define MQTTled1Bright "house/led/one/brightness"
|
||||||
|
#define MQTTled1Color "house/led/one/color"
|
||||||
|
//***** RGB LED 2
|
||||||
|
#define MQTTled2 "house/led/two"
|
||||||
|
#define MQTTled2Bright "house/led/two/brightness"
|
||||||
|
#define MQTTled2Color "house/led/two/color"
|
||||||
|
//***** RGB LED 3
|
||||||
|
#define MQTTled3 "house/led/three"
|
||||||
|
#define MQTTled3Bright "house/led/three/brightness"
|
||||||
|
#define MQTTled3Color "house/led/three/color"
|
||||||
|
//***** RGB LED 4
|
||||||
|
#define MQTTled4 "house/led/four"
|
||||||
|
#define MQTTled4Bright "house/led/four/brightness"
|
||||||
|
#define MQTTled4Color "house/led/four/color"
|
||||||
|
//***** RGB LED 5
|
||||||
|
#define MQTTled5 "house/led/five"
|
||||||
|
#define MQTTled5Bright "house/led/five/brightness"
|
||||||
|
#define MQTTled5Color "house/led/five/color"
|
||||||
|
//***** Light Level Sensor
|
||||||
|
#define MQTTlux "house/lux"
|
||||||
|
//***** Temperature and Humidity Sensor
|
||||||
|
#define MQTTtemp "house/temperature"
|
||||||
|
#define MQTThumid "house/humidity"
|
||||||
|
//***** Motion Sensor
|
||||||
|
#define MQTTpir "house/motion"
|
||||||
|
//***** Door Sensor
|
||||||
|
#define MQTTdoor "house/door"
|
||||||
|
|
||||||
|
//****************************** Connection Settings
|
||||||
|
WiFiClient espClient;
|
||||||
|
PubSubClient client(espClient);
|
||||||
|
long lastMsg = 0;
|
||||||
|
char msg[50];
|
||||||
|
int value = 0;
|
||||||
|
char message_buff[100];
|
||||||
|
|
||||||
|
//****************************** RGB LEDs
|
||||||
|
int R[5];
|
||||||
|
int G[5];
|
||||||
|
int B[5];
|
||||||
|
bool LEDstate[5];
|
||||||
|
|
||||||
|
//****************************** Sensor Smoothing
|
||||||
|
const int numReadings = 30;
|
||||||
|
int lux_R[numReadings]; // the readings from the lux input
|
||||||
|
int temp_R[numReadings]; // the readings from the temperature input
|
||||||
|
int humid_R[numReadings]; // the readings from the humidity input
|
||||||
|
int readIndex = 0; // the index of the current reading
|
||||||
|
int total = 0; // the running total
|
||||||
|
int Lux_A = 0; // the average
|
||||||
|
|
||||||
|
/****************************** Define Global Veriables ***************************************/
|
||||||
|
|
||||||
|
|
||||||
|
void setup() {
|
||||||
|
Serial.begin(115200);
|
||||||
|
setup_wifi();
|
||||||
|
client.setServer(mqtt_server, 1883);
|
||||||
|
client.setCallback(callback);
|
||||||
|
|
||||||
|
if(!crickit.begin()){
|
||||||
|
Serial.println("ERROR!");
|
||||||
|
while(1);
|
||||||
|
}
|
||||||
|
else Serial.println("Crickit started");
|
||||||
|
|
||||||
|
crickit.pinMode(LUX, INPUT);
|
||||||
|
crickit.pinMode(PIR, INPUT_PULLUP);
|
||||||
|
crickit.pinMode(DOOR, INPUT_PULLUP);
|
||||||
|
|
||||||
|
myservo.attach(CRICKIT_SERVO1); // attaches the servo to CRICKIT_SERVO1 pin
|
||||||
|
motor_a.attach(CRICKIT_MOTOR_A1, CRICKIT_MOTOR_A2);
|
||||||
|
strip.begin(); // INITIALIZE NeoPixel strip object (REQUIRED)
|
||||||
|
strip.show(); // Initialize all pixels to 'off'
|
||||||
|
//strip.setPixelColor(1, strip.Color(0, 0, 255));
|
||||||
|
for(uint16_t i=0; i<5; i++) {
|
||||||
|
R[i] = 255;
|
||||||
|
G[i] = 255;
|
||||||
|
B[i] = 255;
|
||||||
|
}
|
||||||
|
for (int thisReading = 0; thisReading < numReadings; thisReading++) {
|
||||||
|
lux_R[thisReading] = 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void setup_wifi() {
|
||||||
|
|
||||||
|
|
||||||
|
delay(10);
|
||||||
|
// We start by connecting to a WiFi network
|
||||||
|
Serial.println();
|
||||||
|
Serial.print("Connecting to ");
|
||||||
|
Serial.println(ssid);
|
||||||
|
|
||||||
|
WiFi.begin(ssid, password);
|
||||||
|
|
||||||
|
while (WiFi.status() != WL_CONNECTED) {
|
||||||
|
delay(500);
|
||||||
|
Serial.print(".");
|
||||||
|
}
|
||||||
|
|
||||||
|
Serial.println("");
|
||||||
|
Serial.println("WiFi connected");
|
||||||
|
Serial.println("IP address: ");
|
||||||
|
Serial.println(WiFi.localIP());
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void callback(char* topic, byte* payload, unsigned int length) {
|
||||||
|
int i = 0;
|
||||||
|
char message_buff[100];
|
||||||
|
String StrPayload;
|
||||||
|
Serial.print("Message arrived [");
|
||||||
|
Serial.print(topic);
|
||||||
|
Serial.print("] ");
|
||||||
|
for (i = 0; i < length; i++) {
|
||||||
|
message_buff[i] = payload[i];
|
||||||
|
}
|
||||||
|
message_buff[i] = '\0';
|
||||||
|
StrPayload = String(message_buff);
|
||||||
|
int IntPayload = StrPayload.toInt();
|
||||||
|
Serial.print(StrPayload);
|
||||||
|
|
||||||
|
if (String(topic) == MQTTlock) {
|
||||||
|
if (StrPayload == "UNLOCK") {
|
||||||
|
myservo.write(180);
|
||||||
|
}
|
||||||
|
if (StrPayload == "LOCK") {
|
||||||
|
myservo.write(0);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (String(topic) == MQTTfan) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
motor_a.throttle(0);
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
motor_a.throttle(1);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (String(topic) == MQTTfanSpeed) {
|
||||||
|
if (StrPayload == "low") {
|
||||||
|
motor_a.throttle(0.4);
|
||||||
|
}
|
||||||
|
if (StrPayload == "medium") {
|
||||||
|
motor_a.throttle(0.6);
|
||||||
|
}
|
||||||
|
if (StrPayload == "high") {
|
||||||
|
motor_a.throttle(1);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
//.................. Light 1 ......................//
|
||||||
|
if (String(topic) == MQTTled1) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
LEDstate[0] = false;
|
||||||
|
strip.setPixelColor(0, strip.Color(0, 0, 0));
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
if (!LEDstate[0]) {
|
||||||
|
strip.setPixelColor(0, strip.Color(R[0], G[0], B[0]));
|
||||||
|
LEDstate[0] = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled1Bright) {
|
||||||
|
int r = map(R[0], 0, 255, 0, IntPayload);
|
||||||
|
int g = map(G[0], 0, 255, 0, IntPayload);
|
||||||
|
int b = map(B[0], 0, 255, 0, IntPayload);
|
||||||
|
strip.setPixelColor(0, strip.Color(r, g, b));
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled1Color) {
|
||||||
|
R[0] = StrPayload.substring(0, StrPayload.indexOf(',')).toInt();
|
||||||
|
G[0] = StrPayload.substring(StrPayload.indexOf(',') + 1, StrPayload.lastIndexOf(',')).toInt();
|
||||||
|
B[0] = StrPayload.substring(StrPayload.lastIndexOf(',') + 1).toInt();
|
||||||
|
strip.setPixelColor(0, strip.Color(R[0], G[0], B[0]));
|
||||||
|
}
|
||||||
|
strip.show();
|
||||||
|
//.................. Light 2 ......................//
|
||||||
|
if (String(topic) == MQTTled2) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
LEDstate[1] = false;
|
||||||
|
strip.setPixelColor(1, strip.Color(0, 0, 0));
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
if (!LEDstate[1]) {
|
||||||
|
strip.setPixelColor(1, strip.Color(R[1], G[1], B[1]));
|
||||||
|
LEDstate[1] = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled2Bright) {
|
||||||
|
int r = map(R[1], 0, 255, 0, IntPayload);
|
||||||
|
int g = map(G[1], 0, 255, 0, IntPayload);
|
||||||
|
int b = map(B[1], 0, 255, 0, IntPayload);
|
||||||
|
strip.setPixelColor(1, strip.Color(r, g, b));
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled2Color) {
|
||||||
|
R[1] = StrPayload.substring(0, StrPayload.indexOf(',')).toInt();
|
||||||
|
G[1] = StrPayload.substring(StrPayload.indexOf(',') + 1, StrPayload.lastIndexOf(',')).toInt();
|
||||||
|
B[1] = StrPayload.substring(StrPayload.lastIndexOf(',') + 1).toInt();
|
||||||
|
strip.setPixelColor(1, strip.Color(R[1], G[1], B[1]));
|
||||||
|
}
|
||||||
|
strip.show();
|
||||||
|
|
||||||
|
//.................. Light 3 ......................//
|
||||||
|
if (String(topic) == MQTTled3) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
LEDstate[2] = false;
|
||||||
|
strip.setPixelColor(2, strip.Color(0, 0, 0));
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
if (!LEDstate[2]) {
|
||||||
|
strip.setPixelColor(2, strip.Color(R[2], G[2], B[2]));
|
||||||
|
LEDstate[2] = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled3Bright) {
|
||||||
|
int r = map(R[2], 0, 255, 0, IntPayload);
|
||||||
|
int g = map(G[2], 0, 255, 0, IntPayload);
|
||||||
|
int b = map(B[2], 0, 255, 0, IntPayload);
|
||||||
|
strip.setPixelColor(2, strip.Color(r, g, b));
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled3Color) {
|
||||||
|
R[2] = StrPayload.substring(0, StrPayload.indexOf(',')).toInt();
|
||||||
|
G[2] = StrPayload.substring(StrPayload.indexOf(',') + 1, StrPayload.lastIndexOf(',')).toInt();
|
||||||
|
B[2] = StrPayload.substring(StrPayload.lastIndexOf(',') + 1).toInt();
|
||||||
|
strip.setPixelColor(2, strip.Color(R[2], G[2], B[2]));
|
||||||
|
}
|
||||||
|
strip.show();
|
||||||
|
|
||||||
|
//.................. Light 4 ......................//
|
||||||
|
if (String(topic) == MQTTled4) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
LEDstate[3] = false;
|
||||||
|
strip.setPixelColor(3, strip.Color(0, 0, 0));
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
if (!LEDstate[3]) {
|
||||||
|
strip.setPixelColor(3, strip.Color(R[3], G[3], B[3]));
|
||||||
|
LEDstate[3] = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled4Bright) {
|
||||||
|
int r = map(R[3], 0, 255, 0, IntPayload);
|
||||||
|
int g = map(G[3], 0, 255, 0, IntPayload);
|
||||||
|
int b = map(B[3], 0, 255, 0, IntPayload);
|
||||||
|
strip.setPixelColor(3, strip.Color(r, g, b));
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled4Color) {
|
||||||
|
R[3] = StrPayload.substring(0, StrPayload.indexOf(',')).toInt();
|
||||||
|
G[3] = StrPayload.substring(StrPayload.indexOf(',') + 1, StrPayload.lastIndexOf(',')).toInt();
|
||||||
|
B[3] = StrPayload.substring(StrPayload.lastIndexOf(',') + 1).toInt();
|
||||||
|
strip.setPixelColor(3, strip.Color(R[3], G[3], B[3]));
|
||||||
|
}
|
||||||
|
strip.show();
|
||||||
|
|
||||||
|
//.................. Light 5 ......................//
|
||||||
|
if (String(topic) == MQTTled5) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
LEDstate[4] = false;
|
||||||
|
strip.setPixelColor(4, strip.Color(0, 0, 0));
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
if (!LEDstate[4]) {
|
||||||
|
strip.setPixelColor(4, strip.Color(R[4], G[4], B[4]));
|
||||||
|
LEDstate[4] = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled5Bright) {
|
||||||
|
int r = map(R[4], 0, 255, 0, IntPayload);
|
||||||
|
int g = map(G[4], 0, 255, 0, IntPayload);
|
||||||
|
int b = map(B[4], 0, 255, 0, IntPayload);
|
||||||
|
strip.setPixelColor(4, strip.Color(r, g, b));
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled5Color) {
|
||||||
|
R[4] = StrPayload.substring(0, StrPayload.indexOf(',')).toInt();
|
||||||
|
G[4] = StrPayload.substring(StrPayload.indexOf(',') + 1, StrPayload.lastIndexOf(',')).toInt();
|
||||||
|
B[4] = StrPayload.substring(StrPayload.lastIndexOf(',') + 1).toInt();
|
||||||
|
strip.setPixelColor(4, strip.Color(R[4], G[4], B[4]));
|
||||||
|
}
|
||||||
|
strip.show();
|
||||||
|
Serial.println();
|
||||||
|
}
|
||||||
|
|
||||||
|
void reconnect() {
|
||||||
|
// Loop until we're reconnected
|
||||||
|
while (!client.connected()) {
|
||||||
|
Serial.print("Attempting MQTT connection...");
|
||||||
|
// Attempt to connect
|
||||||
|
if (client.connect(chip_name, mqtt_user, mqtt_password)) {
|
||||||
|
Serial.println("connected");
|
||||||
|
// Once connected, publish an announcement...
|
||||||
|
client.publish(MQTTlock, "LOCK");
|
||||||
|
// client.publish(MQTTfan, "OFF");
|
||||||
|
// client.publish(MQTTled1Color, "255,255,255");
|
||||||
|
// client.publish(MQTTled1, "OFF");
|
||||||
|
// client.publish(MQTTled2Color, "255,255,255");
|
||||||
|
// client.publish(MQTTled2, "OFF");
|
||||||
|
// client.publish(MQTTled3Color, "255,255,255");
|
||||||
|
// client.publish(MQTTled3, "OFF");
|
||||||
|
// client.publish(MQTTled4Color, "255,255,255");
|
||||||
|
// client.publish(MQTTled4, "OFF");
|
||||||
|
// client.publish(MQTTled5Color, "255,255,255");
|
||||||
|
// client.publish(MQTTled5, "OFF");
|
||||||
|
// ... and resubscribe
|
||||||
|
client.subscribe(MQTTlock);
|
||||||
|
client.subscribe(MQTTfan);
|
||||||
|
client.subscribe(MQTTfanSpeed);
|
||||||
|
client.subscribe(MQTTled1);
|
||||||
|
client.subscribe(MQTTled1Bright);
|
||||||
|
client.subscribe(MQTTled1Color);
|
||||||
|
client.subscribe(MQTTled2);
|
||||||
|
client.subscribe(MQTTled2Bright);
|
||||||
|
client.subscribe(MQTTled2Color);
|
||||||
|
client.subscribe(MQTTled3);
|
||||||
|
client.subscribe(MQTTled3Bright);
|
||||||
|
client.subscribe(MQTTled3Color);
|
||||||
|
client.subscribe(MQTTled4);
|
||||||
|
client.subscribe(MQTTled4Bright);
|
||||||
|
client.subscribe(MQTTled4Color);
|
||||||
|
client.subscribe(MQTTled5);
|
||||||
|
client.subscribe(MQTTled5Bright);
|
||||||
|
client.subscribe(MQTTled5Color);
|
||||||
|
|
||||||
|
} else {
|
||||||
|
Serial.print("failed, rc=");
|
||||||
|
Serial.print(client.state());
|
||||||
|
Serial.println(" try again in 5 seconds");
|
||||||
|
// Wait 5 seconds before retrying
|
||||||
|
delay(5000);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// Fill the dots one after the other with a color
|
||||||
|
void colorWipe(uint32_t c, uint8_t wait) {
|
||||||
|
for(uint16_t i=0; i<NEOPIX_NUMBER_OF_PIXELS; i++) {
|
||||||
|
strip.setPixelColor(i, c);
|
||||||
|
strip.show();
|
||||||
|
delay(wait);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop() {
|
||||||
|
|
||||||
|
if (!client.connected()) {
|
||||||
|
reconnect();
|
||||||
|
}
|
||||||
|
|
||||||
|
//************** Lux Smoothing
|
||||||
|
|
||||||
|
total = total - lux_R[readIndex]; // subtract the last reading
|
||||||
|
lux_R[readIndex] = crickit.analogRead(LUX); // read from the sensor
|
||||||
|
total = total + lux_R[readIndex]; // add the reading to the total
|
||||||
|
readIndex = readIndex + 1; // advance to the next position in the array
|
||||||
|
|
||||||
|
if (readIndex >= numReadings) { // if we're at the end of the array...
|
||||||
|
readIndex = 0; // ...wrap around to the beginning
|
||||||
|
Lux_A = total / numReadings; // calculate the average
|
||||||
|
|
||||||
|
//int Lux = map(lightLux, 290, 590, 10, 960);
|
||||||
|
Serial.print("Lux = ");
|
||||||
|
Serial.println(Lux_A);
|
||||||
|
|
||||||
|
snprintf (msg, 75, "%ld", Lux_A);
|
||||||
|
Serial.println(msg);
|
||||||
|
client.publish(MQTTlux, msg);
|
||||||
|
|
||||||
|
delay(10);
|
||||||
|
if (crickit.digitalRead(PIR)){
|
||||||
|
Serial.println("Motion Sensor = MOVE");
|
||||||
|
client.publish(MQTTpir, "MOVE");
|
||||||
|
}else{
|
||||||
|
Serial.println("Motion Sensor = STILL");
|
||||||
|
client.publish(MQTTpir, "STILL");
|
||||||
|
}
|
||||||
|
delay(10);
|
||||||
|
if (crickit.digitalRead(DOOR)){
|
||||||
|
Serial.println("Door = OPEN");
|
||||||
|
client.publish(MQTTdoor, "OPEN");
|
||||||
|
}else{
|
||||||
|
Serial.println("Door = CLOSED");
|
||||||
|
client.publish(MQTTdoor, "CLOSED");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
delay(10); // delay in between reads for stability
|
||||||
|
client.loop();
|
||||||
|
}
|
||||||
|
|
||||||
11
Mini_Smart_Home_with_Huzzah/HuzzahCrickitIOT-ESP32/config.h
Normal file
11
Mini_Smart_Home_with_Huzzah/HuzzahCrickitIOT-ESP32/config.h
Normal file
|
|
@ -0,0 +1,11 @@
|
||||||
|
|
||||||
|
// Update these with values suitable for your network.
|
||||||
|
|
||||||
|
//enter your WIFI SSID and Password
|
||||||
|
#define ssid "Your SSID"
|
||||||
|
#define password "Your Password"
|
||||||
|
|
||||||
|
// Enter your MQTT server adderss or IP, MQTT username, and MQTT password.
|
||||||
|
#define mqtt_server "MyMQTTadress"
|
||||||
|
#define mqtt_user "MyMQTT"
|
||||||
|
#define mqtt_password "MyMQTTpass"
|
||||||
|
|
@ -0,0 +1,422 @@
|
||||||
|
#include <ESP8266WiFi.h>
|
||||||
|
#include <PubSubClient.h>
|
||||||
|
#include "config.h"
|
||||||
|
#include <Adafruit_Crickit.h>
|
||||||
|
#include <Adafruit_NeoPixel.h>
|
||||||
|
#include <seesaw_servo.h>
|
||||||
|
#include <seesaw_motor.h>
|
||||||
|
|
||||||
|
#define NEOPIX_PIN (13) /* Neopixel pin */
|
||||||
|
#define NEOPIX_NUMBER_OF_PIXELS (7)
|
||||||
|
#define LUX CRICKIT_SIGNAL1
|
||||||
|
#define PIR CRICKIT_SIGNAL3
|
||||||
|
#define DOOR CRICKIT_SIGNAL5
|
||||||
|
#define chip_name "CrickitOIT_1"
|
||||||
|
|
||||||
|
Adafruit_Crickit crickit;
|
||||||
|
seesaw_Servo myservo(&crickit); // create servo object to control a servo
|
||||||
|
seesaw_Motor motor_a(&crickit);
|
||||||
|
Adafruit_NeoPixel strip(NEOPIX_NUMBER_OF_PIXELS, NEOPIX_PIN, NEO_GRB + NEO_KHZ800);
|
||||||
|
|
||||||
|
//****************************** MQTT TOPICS
|
||||||
|
|
||||||
|
//***** Door Lock
|
||||||
|
#define MQTTlock "house/lock"
|
||||||
|
//***** Window Fan
|
||||||
|
#define MQTTfan "house/fan"
|
||||||
|
#define MQTTfanSpeed "house/fan/speed"
|
||||||
|
//***** RGB LED 1
|
||||||
|
#define MQTTled1 "house/led/one"
|
||||||
|
#define MQTTled1Bright "house/led/one/brightness"
|
||||||
|
#define MQTTled1Color "house/led/one/color"
|
||||||
|
//***** RGB LED 2
|
||||||
|
#define MQTTled2 "house/led/two"
|
||||||
|
#define MQTTled2Bright "house/led/two/brightness"
|
||||||
|
#define MQTTled2Color "house/led/two/color"
|
||||||
|
//***** RGB LED 3
|
||||||
|
#define MQTTled3 "house/led/three"
|
||||||
|
#define MQTTled3Bright "house/led/three/brightness"
|
||||||
|
#define MQTTled3Color "house/led/three/color"
|
||||||
|
//***** RGB LED 4
|
||||||
|
#define MQTTled4 "house/led/four"
|
||||||
|
#define MQTTled4Bright "house/led/four/brightness"
|
||||||
|
#define MQTTled4Color "house/led/four/color"
|
||||||
|
//***** RGB LED 5
|
||||||
|
#define MQTTled5 "house/led/five"
|
||||||
|
#define MQTTled5Bright "house/led/five/brightness"
|
||||||
|
#define MQTTled5Color "house/led/five/color"
|
||||||
|
//***** Light Level Sensor
|
||||||
|
#define MQTTlux "house/lux"
|
||||||
|
//***** Temperature and Humidity Sensor
|
||||||
|
#define MQTTtemp "house/temperature"
|
||||||
|
#define MQTThumid "house/humidity"
|
||||||
|
//***** Motion Sensor
|
||||||
|
#define MQTTpir "house/motion"
|
||||||
|
//***** Door Sensor
|
||||||
|
#define MQTTdoor "house/door"
|
||||||
|
|
||||||
|
//****************************** Connection Settings
|
||||||
|
WiFiClient espClient;
|
||||||
|
PubSubClient client(espClient);
|
||||||
|
long lastMsg = 0;
|
||||||
|
char msg[50];
|
||||||
|
int value = 0;
|
||||||
|
char message_buff[100];
|
||||||
|
|
||||||
|
//****************************** RGB LEDs
|
||||||
|
int R[5];
|
||||||
|
int G[5];
|
||||||
|
int B[5];
|
||||||
|
bool LEDstate[5];
|
||||||
|
|
||||||
|
//****************************** Sensor Smoothing
|
||||||
|
const int numReadings = 30;
|
||||||
|
int lux_R[numReadings]; // the readings from the lux input
|
||||||
|
int temp_R[numReadings]; // the readings from the temperature input
|
||||||
|
int humid_R[numReadings]; // the readings from the humidity input
|
||||||
|
int readIndex = 0; // the index of the current reading
|
||||||
|
int total = 0; // the running total
|
||||||
|
int Lux_A = 0; // the average
|
||||||
|
|
||||||
|
/****************************** Define Global Veriables ***************************************/
|
||||||
|
|
||||||
|
|
||||||
|
void setup() {
|
||||||
|
Serial.begin(115200);
|
||||||
|
setup_wifi();
|
||||||
|
client.setServer(mqtt_server, 1883);
|
||||||
|
client.setCallback(callback);
|
||||||
|
|
||||||
|
if(!crickit.begin()){
|
||||||
|
Serial.println("ERROR!");
|
||||||
|
while(1);
|
||||||
|
}
|
||||||
|
else Serial.println("Crickit started");
|
||||||
|
|
||||||
|
crickit.pinMode(LUX, INPUT);
|
||||||
|
crickit.pinMode(PIR, INPUT_PULLUP);
|
||||||
|
crickit.pinMode(DOOR, INPUT_PULLUP);
|
||||||
|
|
||||||
|
myservo.attach(CRICKIT_SERVO1); // attaches the servo to CRICKIT_SERVO1 pin
|
||||||
|
motor_a.attach(CRICKIT_MOTOR_A1, CRICKIT_MOTOR_A2);
|
||||||
|
strip.begin(); // INITIALIZE NeoPixel strip object (REQUIRED)
|
||||||
|
strip.show(); // Initialize all pixels to 'off'
|
||||||
|
//strip.setPixelColor(1, strip.Color(0, 0, 255));
|
||||||
|
for(uint16_t i=0; i<5; i++) {
|
||||||
|
R[i] = 255;
|
||||||
|
G[i] = 255;
|
||||||
|
B[i] = 255;
|
||||||
|
}
|
||||||
|
for (int thisReading = 0; thisReading < numReadings; thisReading++) {
|
||||||
|
lux_R[thisReading] = 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void setup_wifi() {
|
||||||
|
|
||||||
|
|
||||||
|
delay(10);
|
||||||
|
// We start by connecting to a WiFi network
|
||||||
|
Serial.println();
|
||||||
|
Serial.print("Connecting to ");
|
||||||
|
Serial.println(ssid);
|
||||||
|
|
||||||
|
WiFi.begin(ssid, password);
|
||||||
|
|
||||||
|
while (WiFi.status() != WL_CONNECTED) {
|
||||||
|
delay(500);
|
||||||
|
Serial.print(".");
|
||||||
|
}
|
||||||
|
|
||||||
|
Serial.println("");
|
||||||
|
Serial.println("WiFi connected");
|
||||||
|
Serial.println("IP address: ");
|
||||||
|
Serial.println(WiFi.localIP());
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void callback(char* topic, byte* payload, unsigned int length) {
|
||||||
|
int i = 0;
|
||||||
|
char message_buff[100];
|
||||||
|
String StrPayload;
|
||||||
|
Serial.print("Message arrived [");
|
||||||
|
Serial.print(topic);
|
||||||
|
Serial.print("] ");
|
||||||
|
for (i = 0; i < length; i++) {
|
||||||
|
message_buff[i] = payload[i];
|
||||||
|
}
|
||||||
|
message_buff[i] = '\0';
|
||||||
|
StrPayload = String(message_buff);
|
||||||
|
int IntPayload = StrPayload.toInt();
|
||||||
|
Serial.print(StrPayload);
|
||||||
|
|
||||||
|
if (String(topic) == MQTTlock) {
|
||||||
|
if (StrPayload == "UNLOCK") {
|
||||||
|
myservo.write(180);
|
||||||
|
}
|
||||||
|
if (StrPayload == "LOCK") {
|
||||||
|
myservo.write(0);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (String(topic) == MQTTfan) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
motor_a.throttle(0);
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
motor_a.throttle(1);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (String(topic) == MQTTfanSpeed) {
|
||||||
|
if (StrPayload == "low") {
|
||||||
|
motor_a.throttle(0.4);
|
||||||
|
}
|
||||||
|
if (StrPayload == "medium") {
|
||||||
|
motor_a.throttle(0.6);
|
||||||
|
}
|
||||||
|
if (StrPayload == "high") {
|
||||||
|
motor_a.throttle(1);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
//.................. Light 1 ......................//
|
||||||
|
if (String(topic) == MQTTled1) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
LEDstate[0] = false;
|
||||||
|
strip.setPixelColor(0, strip.Color(0, 0, 0));
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
if (!LEDstate[0]) {
|
||||||
|
strip.setPixelColor(0, strip.Color(R[0], G[0], B[0]));
|
||||||
|
LEDstate[0] = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled1Bright) {
|
||||||
|
int r = map(R[0], 0, 255, 0, IntPayload);
|
||||||
|
int g = map(G[0], 0, 255, 0, IntPayload);
|
||||||
|
int b = map(B[0], 0, 255, 0, IntPayload);
|
||||||
|
strip.setPixelColor(0, strip.Color(r, g, b));
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled1Color) {
|
||||||
|
R[0] = StrPayload.substring(0, StrPayload.indexOf(',')).toInt();
|
||||||
|
G[0] = StrPayload.substring(StrPayload.indexOf(',') + 1, StrPayload.lastIndexOf(',')).toInt();
|
||||||
|
B[0] = StrPayload.substring(StrPayload.lastIndexOf(',') + 1).toInt();
|
||||||
|
strip.setPixelColor(0, strip.Color(R[0], G[0], B[0]));
|
||||||
|
}
|
||||||
|
strip.show();
|
||||||
|
//.................. Light 2 ......................//
|
||||||
|
if (String(topic) == MQTTled2) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
LEDstate[1] = false;
|
||||||
|
strip.setPixelColor(1, strip.Color(0, 0, 0));
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
if (!LEDstate[1]) {
|
||||||
|
strip.setPixelColor(1, strip.Color(R[1], G[1], B[1]));
|
||||||
|
LEDstate[1] = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled2Bright) {
|
||||||
|
int r = map(R[1], 0, 255, 0, IntPayload);
|
||||||
|
int g = map(G[1], 0, 255, 0, IntPayload);
|
||||||
|
int b = map(B[1], 0, 255, 0, IntPayload);
|
||||||
|
strip.setPixelColor(1, strip.Color(r, g, b));
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled2Color) {
|
||||||
|
R[1] = StrPayload.substring(0, StrPayload.indexOf(',')).toInt();
|
||||||
|
G[1] = StrPayload.substring(StrPayload.indexOf(',') + 1, StrPayload.lastIndexOf(',')).toInt();
|
||||||
|
B[1] = StrPayload.substring(StrPayload.lastIndexOf(',') + 1).toInt();
|
||||||
|
strip.setPixelColor(1, strip.Color(R[1], G[1], B[1]));
|
||||||
|
}
|
||||||
|
strip.show();
|
||||||
|
|
||||||
|
//.................. Light 3 ......................//
|
||||||
|
if (String(topic) == MQTTled3) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
LEDstate[2] = false;
|
||||||
|
strip.setPixelColor(2, strip.Color(0, 0, 0));
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
if (!LEDstate[2]) {
|
||||||
|
strip.setPixelColor(2, strip.Color(R[2], G[2], B[2]));
|
||||||
|
LEDstate[2] = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled3Bright) {
|
||||||
|
int r = map(R[2], 0, 255, 0, IntPayload);
|
||||||
|
int g = map(G[2], 0, 255, 0, IntPayload);
|
||||||
|
int b = map(B[2], 0, 255, 0, IntPayload);
|
||||||
|
strip.setPixelColor(2, strip.Color(r, g, b));
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled3Color) {
|
||||||
|
R[2] = StrPayload.substring(0, StrPayload.indexOf(',')).toInt();
|
||||||
|
G[2] = StrPayload.substring(StrPayload.indexOf(',') + 1, StrPayload.lastIndexOf(',')).toInt();
|
||||||
|
B[2] = StrPayload.substring(StrPayload.lastIndexOf(',') + 1).toInt();
|
||||||
|
strip.setPixelColor(2, strip.Color(R[2], G[2], B[2]));
|
||||||
|
}
|
||||||
|
strip.show();
|
||||||
|
|
||||||
|
//.................. Light 4 ......................//
|
||||||
|
if (String(topic) == MQTTled4) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
LEDstate[3] = false;
|
||||||
|
strip.setPixelColor(3, strip.Color(0, 0, 0));
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
if (!LEDstate[3]) {
|
||||||
|
strip.setPixelColor(3, strip.Color(R[3], G[3], B[3]));
|
||||||
|
LEDstate[3] = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled4Bright) {
|
||||||
|
int r = map(R[3], 0, 255, 0, IntPayload);
|
||||||
|
int g = map(G[3], 0, 255, 0, IntPayload);
|
||||||
|
int b = map(B[3], 0, 255, 0, IntPayload);
|
||||||
|
strip.setPixelColor(3, strip.Color(r, g, b));
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled4Color) {
|
||||||
|
R[3] = StrPayload.substring(0, StrPayload.indexOf(',')).toInt();
|
||||||
|
G[3] = StrPayload.substring(StrPayload.indexOf(',') + 1, StrPayload.lastIndexOf(',')).toInt();
|
||||||
|
B[3] = StrPayload.substring(StrPayload.lastIndexOf(',') + 1).toInt();
|
||||||
|
strip.setPixelColor(3, strip.Color(R[3], G[3], B[3]));
|
||||||
|
}
|
||||||
|
strip.show();
|
||||||
|
|
||||||
|
//.................. Light 5 ......................//
|
||||||
|
if (String(topic) == MQTTled5) {
|
||||||
|
if (StrPayload == "OFF") {
|
||||||
|
LEDstate[4] = false;
|
||||||
|
strip.setPixelColor(4, strip.Color(0, 0, 0));
|
||||||
|
}
|
||||||
|
if (StrPayload == "ON") {
|
||||||
|
if (!LEDstate[4]) {
|
||||||
|
strip.setPixelColor(4, strip.Color(R[4], G[4], B[4]));
|
||||||
|
LEDstate[4] = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled5Bright) {
|
||||||
|
int r = map(R[4], 0, 255, 0, IntPayload);
|
||||||
|
int g = map(G[4], 0, 255, 0, IntPayload);
|
||||||
|
int b = map(B[4], 0, 255, 0, IntPayload);
|
||||||
|
strip.setPixelColor(4, strip.Color(r, g, b));
|
||||||
|
}
|
||||||
|
if (String(topic) == MQTTled5Color) {
|
||||||
|
R[4] = StrPayload.substring(0, StrPayload.indexOf(',')).toInt();
|
||||||
|
G[4] = StrPayload.substring(StrPayload.indexOf(',') + 1, StrPayload.lastIndexOf(',')).toInt();
|
||||||
|
B[4] = StrPayload.substring(StrPayload.lastIndexOf(',') + 1).toInt();
|
||||||
|
strip.setPixelColor(4, strip.Color(R[4], G[4], B[4]));
|
||||||
|
}
|
||||||
|
strip.show();
|
||||||
|
Serial.println();
|
||||||
|
}
|
||||||
|
|
||||||
|
void reconnect() {
|
||||||
|
// Loop until we're reconnected
|
||||||
|
while (!client.connected()) {
|
||||||
|
Serial.print("Attempting MQTT connection...");
|
||||||
|
// Attempt to connect
|
||||||
|
if (client.connect(chip_name, mqtt_user, mqtt_password)) {
|
||||||
|
Serial.println("connected");
|
||||||
|
// Once connected, publish an announcement...
|
||||||
|
client.publish(MQTTlock, "LOCK");
|
||||||
|
// client.publish(MQTTfan, "OFF");
|
||||||
|
// client.publish(MQTTled1Color, "255,255,255");
|
||||||
|
// client.publish(MQTTled1, "OFF");
|
||||||
|
// client.publish(MQTTled2Color, "255,255,255");
|
||||||
|
// client.publish(MQTTled2, "OFF");
|
||||||
|
// client.publish(MQTTled3Color, "255,255,255");
|
||||||
|
// client.publish(MQTTled3, "OFF");
|
||||||
|
// client.publish(MQTTled4Color, "255,255,255");
|
||||||
|
// client.publish(MQTTled4, "OFF");
|
||||||
|
// client.publish(MQTTled5Color, "255,255,255");
|
||||||
|
// client.publish(MQTTled5, "OFF");
|
||||||
|
// ... and resubscribe
|
||||||
|
client.subscribe(MQTTlock);
|
||||||
|
client.subscribe(MQTTfan);
|
||||||
|
client.subscribe(MQTTfanSpeed);
|
||||||
|
client.subscribe(MQTTled1);
|
||||||
|
client.subscribe(MQTTled1Bright);
|
||||||
|
client.subscribe(MQTTled1Color);
|
||||||
|
client.subscribe(MQTTled2);
|
||||||
|
client.subscribe(MQTTled2Bright);
|
||||||
|
client.subscribe(MQTTled2Color);
|
||||||
|
client.subscribe(MQTTled3);
|
||||||
|
client.subscribe(MQTTled3Bright);
|
||||||
|
client.subscribe(MQTTled3Color);
|
||||||
|
client.subscribe(MQTTled4);
|
||||||
|
client.subscribe(MQTTled4Bright);
|
||||||
|
client.subscribe(MQTTled4Color);
|
||||||
|
client.subscribe(MQTTled5);
|
||||||
|
client.subscribe(MQTTled5Bright);
|
||||||
|
client.subscribe(MQTTled5Color);
|
||||||
|
|
||||||
|
} else {
|
||||||
|
Serial.print("failed, rc=");
|
||||||
|
Serial.print(client.state());
|
||||||
|
Serial.println(" try again in 5 seconds");
|
||||||
|
// Wait 5 seconds before retrying
|
||||||
|
delay(5000);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// Fill the dots one after the other with a color
|
||||||
|
void colorWipe(uint32_t c, uint8_t wait) {
|
||||||
|
for(uint16_t i=0; i<NEOPIX_NUMBER_OF_PIXELS; i++) {
|
||||||
|
strip.setPixelColor(i, c);
|
||||||
|
strip.show();
|
||||||
|
delay(wait);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop() {
|
||||||
|
|
||||||
|
if (!client.connected()) {
|
||||||
|
reconnect();
|
||||||
|
}
|
||||||
|
|
||||||
|
//************** Lux Smoothing
|
||||||
|
|
||||||
|
total = total - lux_R[readIndex]; // subtract the last reading
|
||||||
|
lux_R[readIndex] = crickit.analogRead(LUX); // read from the sensor
|
||||||
|
total = total + lux_R[readIndex]; // add the reading to the total
|
||||||
|
readIndex = readIndex + 1; // advance to the next position in the array
|
||||||
|
|
||||||
|
if (readIndex >= numReadings) { // if we're at the end of the array...
|
||||||
|
readIndex = 0; // ...wrap around to the beginning
|
||||||
|
Lux_A = total / numReadings; // calculate the average
|
||||||
|
|
||||||
|
//int Lux = map(lightLux, 290, 590, 10, 960);
|
||||||
|
Serial.print("Lux = ");
|
||||||
|
Serial.println(Lux_A);
|
||||||
|
|
||||||
|
snprintf (msg, 75, "%ld", Lux_A);
|
||||||
|
Serial.println(msg);
|
||||||
|
client.publish(MQTTlux, msg);
|
||||||
|
|
||||||
|
delay(10);
|
||||||
|
if (crickit.digitalRead(PIR)){
|
||||||
|
Serial.println("Motion Sensor = MOVE");
|
||||||
|
client.publish(MQTTpir, "MOVE");
|
||||||
|
}else{
|
||||||
|
Serial.println("Motion Sensor = STILL");
|
||||||
|
client.publish(MQTTpir, "STILL");
|
||||||
|
}
|
||||||
|
delay(10);
|
||||||
|
if (crickit.digitalRead(DOOR)){
|
||||||
|
Serial.println("Door = OPEN");
|
||||||
|
client.publish(MQTTdoor, "OPEN");
|
||||||
|
}else{
|
||||||
|
Serial.println("Door = CLOSED");
|
||||||
|
client.publish(MQTTdoor, "CLOSED");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
delay(10); // delay in between reads for stability
|
||||||
|
client.loop();
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,10 @@
|
||||||
|
// Update these with values suitable for your network.
|
||||||
|
|
||||||
|
//enter your WIFI SSID and Password
|
||||||
|
#define ssid "Your SSID"
|
||||||
|
#define password "Your Password"
|
||||||
|
|
||||||
|
// Enter your MQTT server adderss or IP, MQTT username, and MQTT password.
|
||||||
|
#define mqtt_server "MyMQTTadress"
|
||||||
|
#define mqtt_user "MyMQTT"
|
||||||
|
#define mqtt_password "MyMQTTpass"
|
||||||
|
|
@ -1,6 +1,70 @@
|
||||||
### Adafruit Learning System Tutorial - Mini Smart Home with Huzzah
|
# Adafruit-Crickit-Mini-Smart-Home-MQTT
|
||||||
This is the code for the tutorial at https://learn.adafruit.com/mini-smart-home-with-huzzah/
|
Arduino based Mini Smart Home
|
||||||
|
|
||||||
All code MIT License, please keep attribution to author Richard Albritton
|
https://learn.adafruit.com/mini-smart-home-with-huzzah/overview
|
||||||
|
|
||||||
Please consider buying your parts at [Adafruit.com](https://www.adafruit.com) to support open source code.
|
MQTT Feeds:
|
||||||
|
|
||||||
|
1. Door Lock
|
||||||
|
- house/lock
|
||||||
|
- State: LOCK or UNLOCK
|
||||||
|
|
||||||
|
2. Window Fan
|
||||||
|
- house/fan
|
||||||
|
- State: ON or OFF
|
||||||
|
- house/fan/speed
|
||||||
|
- State: 0 to 255
|
||||||
|
3. RGB LED 1
|
||||||
|
- house/led/one
|
||||||
|
- State: ON or OFF
|
||||||
|
- house/led/one/brightness
|
||||||
|
- State: 0 to 255
|
||||||
|
- house/led/one/color
|
||||||
|
- State: three sets of 0 - 255 numbers separated by commas.
|
||||||
|
- Template: “red,green,blue”
|
||||||
|
- Example: 20,150,255
|
||||||
|
4. RGB LED 2
|
||||||
|
- house/led/two
|
||||||
|
- State: ON or OFF
|
||||||
|
- house/led/two/brightness
|
||||||
|
- State: 0 to 255
|
||||||
|
- house/led/two/color
|
||||||
|
- State: three sets of 0 - 255 numbers separated by commas.
|
||||||
|
- Template: “red,green,blue”
|
||||||
|
- Example: 20,150,255
|
||||||
|
5. RGB LED 3
|
||||||
|
- house/led/three
|
||||||
|
- State: ON or OFF
|
||||||
|
- house/led/three/brightness
|
||||||
|
- State: 0 to 255
|
||||||
|
- house/led/three/color
|
||||||
|
- State: three sets of 0 - 255 numbers separated by commas.
|
||||||
|
- Template: “red,green,blue”
|
||||||
|
- Example: 20,150,255
|
||||||
|
6. RGB LED 4
|
||||||
|
- house/led/four
|
||||||
|
- State: ON or OFF
|
||||||
|
- house/led/four/brightness
|
||||||
|
- State: 0 to 255
|
||||||
|
- house/led/four/color
|
||||||
|
- State: three sets of 0 - 255 numbers separated by commas.
|
||||||
|
- Template: “red,green,blue”
|
||||||
|
- Example: 20,150,255
|
||||||
|
7. RGB LED 5
|
||||||
|
- house/led/five
|
||||||
|
- State: ON or OFF
|
||||||
|
- house/led/five/brightness
|
||||||
|
- State: 0 to 255
|
||||||
|
- house/led/five/color
|
||||||
|
- State: three sets of 0 - 255 numbers separated by commas.
|
||||||
|
- Template: “red,green,blue”
|
||||||
|
- Example: 20,150,255
|
||||||
|
8. Light Level Sensor
|
||||||
|
- house/lux
|
||||||
|
- State: 0 to 6000
|
||||||
|
9. Motion Sensor
|
||||||
|
- house/motion
|
||||||
|
- State: MOVE or STILL
|
||||||
|
10. Door Sensor
|
||||||
|
- house/door
|
||||||
|
- State: OPEN or CLOSED
|
||||||
|
|
|
||||||
152
Mini_Smart_Home_with_Huzzah/YAML Code.yaml
Normal file
152
Mini_Smart_Home_with_Huzzah/YAML Code.yaml
Normal file
|
|
@ -0,0 +1,152 @@
|
||||||
|
|
||||||
|
# Configure a default setup of Home Assistant (frontend, api, etc)
|
||||||
|
default_config:
|
||||||
|
|
||||||
|
# Uncomment this if you are using SSL/TLS, running in Docker container, etc.
|
||||||
|
# http:
|
||||||
|
# base_url: example.duckdns.org:8123
|
||||||
|
|
||||||
|
# Text to speech
|
||||||
|
tts:
|
||||||
|
- platform: google_translate
|
||||||
|
|
||||||
|
sensor:
|
||||||
|
# Weather prediction
|
||||||
|
- platform: yr
|
||||||
|
- platform: mqtt
|
||||||
|
name: "Light Sensor"
|
||||||
|
state_topic: "house/lux"
|
||||||
|
unit_of_measurement: 'Lux'
|
||||||
|
icon: mdi:brightness-6
|
||||||
|
- platform: mqtt
|
||||||
|
name: "Door Sensor"
|
||||||
|
state_topic: "house/door"
|
||||||
|
icon: mdi:door
|
||||||
|
- platform: mqtt
|
||||||
|
name: "Motion Sensor"
|
||||||
|
state_topic: "house/motion"
|
||||||
|
icon: mdi:motion-sensor
|
||||||
|
|
||||||
|
fan:
|
||||||
|
- platform: mqtt
|
||||||
|
name: "Fan"
|
||||||
|
state_topic: "house/fan"
|
||||||
|
command_topic: "house/fan"
|
||||||
|
speed_state_topic: "house/fan/speed"
|
||||||
|
speed_command_topic: "house/fan/speed"
|
||||||
|
qos: 0
|
||||||
|
payload_on: "ON"
|
||||||
|
payload_off: "OFF"
|
||||||
|
payload_low_speed: "low"
|
||||||
|
payload_medium_speed: "medium"
|
||||||
|
payload_high_speed: "high"
|
||||||
|
speeds:
|
||||||
|
- low
|
||||||
|
- medium
|
||||||
|
- high
|
||||||
|
|
||||||
|
light:
|
||||||
|
- platform: group
|
||||||
|
name: All Lights
|
||||||
|
entities:
|
||||||
|
- light.light_1
|
||||||
|
- light.light_2
|
||||||
|
- light.light_3
|
||||||
|
- light.light_4
|
||||||
|
- light.light_5
|
||||||
|
- platform: mqtt
|
||||||
|
name: "Light 1"
|
||||||
|
state_topic: "house/led/one"
|
||||||
|
command_topic: "house/led/one"
|
||||||
|
brightness_state_topic: "house/led/one/brightness"
|
||||||
|
brightness_command_topic: "house/led/one/brightness"
|
||||||
|
rgb_state_topic: "house/led/one/color"
|
||||||
|
rgb_command_topic: "house/led/one/color"
|
||||||
|
on_command_type: first
|
||||||
|
state_value_template: "{{ value_json.state }}"
|
||||||
|
brightness_value_template: "{{ value_json.brightness }}"
|
||||||
|
rgb_value_template: "{{ value_json.rgb | join(',') }}"
|
||||||
|
qos: 0
|
||||||
|
payload_on: "ON"
|
||||||
|
payload_off: "OFF"
|
||||||
|
optimistic: false
|
||||||
|
- platform: mqtt
|
||||||
|
name: "Light 2"
|
||||||
|
state_topic: "house/led/two"
|
||||||
|
command_topic: "house/led/two"
|
||||||
|
brightness_state_topic: "house/led/two/brightness"
|
||||||
|
brightness_command_topic: "house/led/two/brightness"
|
||||||
|
rgb_state_topic: "house/led/two/color"
|
||||||
|
rgb_command_topic: "house/led/two/color"
|
||||||
|
on_command_type: first
|
||||||
|
state_value_template: "{{ value_json.state }}"
|
||||||
|
brightness_value_template: "{{ value_json.brightness }}"
|
||||||
|
rgb_value_template: "{{ value_json.rgb | join(',') }}"
|
||||||
|
qos: 0
|
||||||
|
payload_on: "ON"
|
||||||
|
payload_off: "OFF"
|
||||||
|
optimistic: false
|
||||||
|
- platform: mqtt
|
||||||
|
name: "Light 3"
|
||||||
|
state_topic: "house/led/three"
|
||||||
|
command_topic: "house/led/three"
|
||||||
|
brightness_state_topic: "house/led/three/brightness"
|
||||||
|
brightness_command_topic: "house/led/three/brightness"
|
||||||
|
rgb_state_topic: "house/led/three/color"
|
||||||
|
rgb_command_topic: "house/led/three/color"
|
||||||
|
on_command_type: first
|
||||||
|
state_value_template: "{{ value_json.state }}"
|
||||||
|
brightness_value_template: "{{ value_json.brightness }}"
|
||||||
|
rgb_value_template: "{{ value_json.rgb | join(',') }}"
|
||||||
|
qos: 0
|
||||||
|
payload_on: "ON"
|
||||||
|
payload_off: "OFF"
|
||||||
|
optimistic: false
|
||||||
|
- platform: mqtt
|
||||||
|
name: "Light 4"
|
||||||
|
state_topic: "house/led/four"
|
||||||
|
command_topic: "house/led/four"
|
||||||
|
brightness_state_topic: "house/led/four/brightness"
|
||||||
|
brightness_command_topic: "house/led/four/brightness"
|
||||||
|
rgb_state_topic: "house/led/four/color"
|
||||||
|
rgb_command_topic: "house/led/four/color"
|
||||||
|
on_command_type: first
|
||||||
|
state_value_template: "{{ value_json.state }}"
|
||||||
|
brightness_value_template: "{{ value_json.brightness }}"
|
||||||
|
rgb_value_template: "{{ value_json.rgb | join(',') }}"
|
||||||
|
qos: 0
|
||||||
|
payload_on: "ON"
|
||||||
|
payload_off: "OFF"
|
||||||
|
optimistic: false
|
||||||
|
- platform: mqtt
|
||||||
|
name: "Light 5"
|
||||||
|
state_topic: "house/led/five"
|
||||||
|
command_topic: "house/led/five"
|
||||||
|
brightness_state_topic: "house/led/five/brightness"
|
||||||
|
brightness_command_topic: "house/led/five/brightness"
|
||||||
|
rgb_state_topic: "house/led/five/color"
|
||||||
|
rgb_command_topic: "house/led/five/color"
|
||||||
|
on_command_type: first
|
||||||
|
state_value_template: "{{ value_json.state }}"
|
||||||
|
brightness_value_template: "{{ value_json.brightness }}"
|
||||||
|
rgb_value_template: "{{ value_json.rgb | join(',') }}"
|
||||||
|
qos: 0
|
||||||
|
payload_on: "ON"
|
||||||
|
payload_off: "OFF"
|
||||||
|
optimistic: false
|
||||||
|
|
||||||
|
lock:
|
||||||
|
- platform: mqtt
|
||||||
|
name: Frontdoor
|
||||||
|
state_topic: "house/lock"
|
||||||
|
command_topic: "house/lock"
|
||||||
|
payload_lock: "LOCK"
|
||||||
|
payload_unlock: "UNLOCK"
|
||||||
|
optimistic: true
|
||||||
|
qos: 1
|
||||||
|
#retain: true
|
||||||
|
value_template: '{{ value.x }}'
|
||||||
|
|
||||||
|
group: !include groups.yaml
|
||||||
|
automation: !include automations.yaml
|
||||||
|
script: !include scripts.yaml
|
||||||
Loading…
Reference in a new issue