Adding NeoSlider code

Adafruit_NeoSlider/Arduino_NeoSlider/Arduino_NeoSlider.ino

@@ -0,0 +1,85 @@
+/*
+ * This example shows how read the potentiometer on the I2C QT Slide Potentiometer
+ * and make the NeoPixels change too!
+ */
+
+#include "Adafruit_seesaw.h"
+#include <seesaw_neopixel.h>
+
+#define  DEFAULT_I2C_ADDR 0x30
+#define  ANALOGIN   18
+#define  NEOPIXELOUT 14
+
+Adafruit_seesaw seesaw;
+seesaw_NeoPixel pixels = seesaw_NeoPixel(4, NEOPIXELOUT, NEO_GRB + NEO_KHZ800);
+
+void setup() {
+  Serial.begin(115200);
+  
+  //while (!Serial) delay(10);   // wait until serial port is opened
+
+  Serial.println(F("Adafruit PID 5295 I2C QT Slide Potentiometer test!"));
+  
+  if (!seesaw.begin(DEFAULT_I2C_ADDR)) {
+    Serial.println(F("seesaw not found!"));
+    while(1) delay(10);
+  }
+
+  uint16_t pid;
+  uint8_t year, mon, day;
+  
+  seesaw.getProdDatecode(&pid, &year, &mon, &day);
+  Serial.print("seesaw found PID: ");
+  Serial.print(pid);
+  Serial.print(" datecode: ");
+  Serial.print(2000+year); Serial.print("/"); 
+  Serial.print(mon); Serial.print("/"); 
+  Serial.println(day);
+
+  if (pid != 5295) {
+    Serial.println(F("Wrong seesaw PID"));
+    while (1) delay(10);
+  }
+
+  if (!pixels.begin(DEFAULT_I2C_ADDR)){
+    Serial.println("seesaw pixels not found!");
+    while(1) delay(10);
+  }
+
+  Serial.println(F("seesaw started OK!"));
+
+  pixels.setBrightness(255);  // half bright
+  pixels.show(); // Initialize all pixels to 'off'
+}
+
+
+
+void loop() {
+  // read the potentiometer
+  uint16_t slide_val = seesaw.analogRead(ANALOGIN);
+  Serial.println(slide_val);
+
+  for (uint8_t i=0; i< pixels.numPixels(); i++) {
+    pixels.setPixelColor(i, Wheel(slide_val / 4));
+  }
+  pixels.show();
+  
+  delay(50);
+}
+
+
+
+// Input a value 0 to 255 to get a color value.
+// The colours are a transition r - g - b - back to r.
+uint32_t Wheel(byte WheelPos) {
+  WheelPos = 255 - WheelPos;
+  if(WheelPos < 85) {
+    return seesaw_NeoPixel::Color(255 - WheelPos * 3, 0, WheelPos * 3);
+  }
+  if(WheelPos < 170) {
+    WheelPos -= 85;
+    return seesaw_NeoPixel::Color(0, WheelPos * 3, 255 - WheelPos * 3);
+  }
+  WheelPos -= 170;
+  return seesaw_NeoPixel::Color(WheelPos * 3, 255 - WheelPos * 3, 0);
+}

Adafruit_NeoSlider/Arduino_NeoSlider_Dual/Arduino_NeoSlider_Dual.ino

@@ -0,0 +1,94 @@
+/*
+ * This example shows how read the potentiometer on the I2C QT Slide Potentiometer
+ * and make the NeoPixels change too!
+ */
+
+#include "Adafruit_seesaw.h"
+#include <seesaw_neopixel.h>
+
+#define  DEFAULT_I2C_ADDR 0x30
+#define  ANALOGIN   18
+#define  NEOPIXELOUT 14
+
+Adafruit_seesaw seesaw1;
+Adafruit_seesaw seesaw2;
+seesaw_NeoPixel pixels1 = seesaw_NeoPixel(4, NEOPIXELOUT, NEO_GRB + NEO_KHZ800);
+seesaw_NeoPixel pixels2 = seesaw_NeoPixel(4, NEOPIXELOUT, NEO_GRB + NEO_KHZ800);
+
+void setup() {
+  Serial.begin(115200);
+  
+  //while (!Serial) delay(10);   // wait until serial port is opened
+
+  Serial.println(F("Adafruit PID 5295 I2C QT Slide Potentiometer test!"));
+  
+  if (!seesaw1.begin(DEFAULT_I2C_ADDR) || !seesaw2.begin(DEFAULT_I2C_ADDR+1)) {
+    Serial.println(F("seesaws not found!"));
+    while(1) delay(10);
+  }
+
+  uint16_t pid;
+  uint8_t year, mon, day;
+  
+  seesaw1.getProdDatecode(&pid, &year, &mon, &day);
+  Serial.print("seesaw found PID: ");
+  Serial.print(pid);
+  Serial.print(" datecode: ");
+  Serial.print(2000+year); Serial.print("/"); 
+  Serial.print(mon); Serial.print("/"); 
+  Serial.println(day);
+
+  if (pid != 5295) {
+    Serial.println(F("Wrong seesaw PID"));
+    while (1) delay(10);
+  }
+
+  if (!pixels1.begin(DEFAULT_I2C_ADDR) || !pixels2.begin(DEFAULT_I2C_ADDR+1)){
+    Serial.println("seesaw pixels not found!");
+    while(1) delay(10);
+  }
+
+  Serial.println(F("seesaw started OK!"));
+
+  pixels1.setBrightness(255);  // half bright
+  pixels2.setBrightness(255);  // half bright
+  pixels1.show(); // Initialize all pixels to 'off'
+  pixels2.show(); // Initialize all pixels to 'off'
+}
+
+
+
+void loop() {
+  // read the potentiometer
+  uint16_t slide1_val = seesaw1.analogRead(ANALOGIN);
+  uint16_t slide2_val = seesaw2.analogRead(ANALOGIN);
+  Serial.print(slide1_val);
+  Serial.print(", ");
+  Serial.println(slide2_val);
+
+  for (uint8_t i=0; i< pixels1.numPixels(); i++) {
+    pixels1.setPixelColor(i, Wheel(slide1_val / 4));
+    pixels2.setPixelColor(i, Wheel(slide2_val / 4));
+  }
+  pixels1.show();
+  pixels2.show();
+  
+  delay(50);
+}
+
+
+
+// Input a value 0 to 255 to get a color value.
+// The colours are a transition r - g - b - back to r.
+uint32_t Wheel(byte WheelPos) {
+  WheelPos = 255 - WheelPos;
+  if(WheelPos < 85) {
+    return seesaw_NeoPixel::Color(255 - WheelPos * 3, 0, WheelPos * 3);
+  }
+  if(WheelPos < 170) {
+    WheelPos -= 85;
+    return seesaw_NeoPixel::Color(0, WheelPos * 3, 255 - WheelPos * 3);
+  }
+  WheelPos -= 170;
+  return seesaw_NeoPixel::Color(WheelPos * 3, 255 - WheelPos * 3, 0);
+}

Adafruit_NeoSlider/CircuitPython_Rainbow_Slider/code.py

@@ -0,0 +1,25 @@
+# SPDX-FileCopyrightText: 2021 Kattni Rembor for Adafruit Industries
+# SPDX-License-Identifier: MIT
+"""
+NeoSlider NeoPixel Rainbow Demo
+"""
+import board
+from rainbowio import colorwheel
+from adafruit_seesaw.seesaw import Seesaw
+from adafruit_seesaw.analoginput import AnalogInput
+from adafruit_seesaw import neopixel
+
+# NeoSlider Setup
+neoslider = Seesaw(board.I2C(), 0x31)
+potentiometer = AnalogInput(neoslider, 18)
+pixels = neopixel.NeoPixel(neoslider, 14, 4)
+
+
+def potentiometer_to_color(value):
+    """Scale the potentiometer values (0-1023) to the colorwheel values (0-255)."""
+    return value / 1023 * 255
+
+
+while True:
+    # Fill the pixels a color based on the position of the potentiometer.
+    pixels.fill(colorwheel(potentiometer_to_color(potentiometer.value)))