adafruit-mirror/Adafruit_Learning_System_Guides
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Added commented out board.stemma_i2c()

Browse source
This commit is contained in:
evaherrada 2022-12-21 15:48:18 -05:00
parent 36a27be58c
commit 4d397d43c0
No known key found for this signature in database
GPG key ID: 35250D1CCA2FB384
20 changed files with 52 additions and 21 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
Macropad_2FA_TOTP/rtc_setter.py
View file

@ -6,7 +6,9 @@ import time
import board
import adafruit_pcf8523
pcf = adafruit_pcf8523.PCF8523(board.I2C())
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
pcf = adafruit_pcf8523.PCF8523(i2c)
# values to set
YEAR = 2021
@ -36,4 +38,4 @@ while True:
now.tm_hour,
now.tm_min,
now.tm_sec))
time.sleep(1)
time.sleep(1)

4
MagTag_Dishwasher_Status/wake_on_flip/code.py
View file

@ -12,7 +12,9 @@ import adafruit_lis3dh
epd = board.DISPLAY
# set up accelerometer
lis = adafruit_lis3dh.LIS3DH_I2C(board.I2C(), address=0x19)
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
lis = adafruit_lis3dh.LIS3DH_I2C(i2c, address=0x19)
# See: ST Design Tip DT0008 - Simple screen rotation using
# the accelerometer built-in 4D detection interrupt

4
Magic_Nine_Ball/code.py
View file

@ -23,7 +23,9 @@ images = list(filter(lambda x: x.endswith("bmp"), os.listdir("/")))
i = random.randint(0, (len(images)-1)) # initial image is randomly selected
# Set up accelerometer on I2C bus, 4G range:
ACCEL = adafruit_lis3dh.LIS3DH_I2C(board.I2C(), address=0x18)
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
ACCEL = adafruit_lis3dh.LIS3DH_I2C(i2c, address=0x18)
ACCEL.range = adafruit_lis3dh.RANGE_4_G

4
Matrix_Portal_CO2_Monitor/code.py
View file

@ -15,7 +15,9 @@ UPDATE_RATE = 1
# ---------------------
# the sensor
scd30 = adafruit_scd30.SCD30(board.I2C())
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
scd30 = adafruit_scd30.SCD30(i2c)
# optional if known (pick one)
# scd30.ambient_pressure = 1013.25

3
Motion_Buddy/code.py
View file

@ -17,7 +17,8 @@ from adafruit_ble.advertising.standard import SolicitServicesAdvertisement
from adafruit_ble_apple_media import AppleMediaService, UnsupportedCommand
# Initialize the accelerometer
i2c = board.I2C()
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
lis3dh = adafruit_lis3dh.LIS3DH_I2C(i2c)
# Initialize BLE radio

3
Nunchuck_Laser/code.py
View file

@ -17,7 +17,8 @@ INVERT_PITCH = False
# STEMMA QT 3V needs to be activated
i2c_power = digitalio.DigitalInOut(board.I2C_POWER)
i2c_power.switch_to_output(value=False)
i2c = board.I2C()
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
wing = adafruit_pca9685.PCA9685(i2c)
wing.frequency = 50

4
Nunchuck_Ring/code.py
View file

@ -8,7 +8,9 @@ import adafruit_nunchuk
import neopixel
import simpleio
nc = adafruit_nunchuk.Nunchuk(board.I2C())
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
nc = adafruit_nunchuk.Nunchuk(i2c)
# create neopixel object
NEOPIN = board.D6
NEOLENGTH = 60

4
Ouija_Board_Bluefruit/code.py
View file

@ -30,7 +30,9 @@ advertisement = ProvideServicesAdvertisement(uart_service)
num_motors = 1 # up to 4 motors depending on the prop you are driving
motorwing = MotorKit(i2c=board.I2C())
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
motorwing = MotorKit(i2c=i2c)
motorwing.frequency = 122 # tune this 50 - 200 range
max_throttle = 0.65 # tune this 0.2 - 1 range

3
Pi400_Knobs/code.py
View file

@ -14,7 +14,8 @@ from pythonosc import udp_client
sender = udp_client.SimpleUDPClient("127.0.0.1", 4560)
sender.send_message("/trigger/prophet", [43, 110, 1, 0.7])
i2c = board.I2C()
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
pcf = PCF.PCF8591(i2c)
pcf_in_0 = AnalogIn(pcf, PCF.A0)

5
PipBoy_2040/code.py
View file

@ -10,8 +10,9 @@ from adafruit_st7789 import ST7789
displayio.release_displays()
i2c_bus = board.I2C()
ss = Seesaw(i2c_bus)
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
ss = Seesaw(i2c)
spi = board.SPI() # setup for display over SPI
tft_cs = board.D5

3
PowerGlove_BLE_MIDI/code.py
View file

@ -18,7 +18,8 @@ import adafruit_lsm6ds.lsm6ds33 # accelerometer
import simpleio
from analogio import AnalogIn
i2c = board.I2C()
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
sense_accel = adafruit_lsm6ds.lsm6ds33.LSM6DS33(i2c)
analog_in_thumb = AnalogIn(board.A3)

3
Propmaker_Master_Sword/code.py
View file

@ -58,7 +58,8 @@ audio = audioio.AudioOut(board.A0) # Speaker
wave_file = None
# Set up accelerometer on I2C bus, 4G range:
i2c = board.I2C()
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
accel = adafruit_lis3dh.LIS3DH_I2C(i2c)
accel.range = adafruit_lis3dh.RANGE_4_G

3
PyGamer_Thermal_Camera/code.py
View file

@ -27,7 +27,8 @@ if hasattr(board, "JOYSTICK_X"):
else: panel.has_joystick = False # Must be PyBadge
# Establish I2C interface for the AMG8833 Thermal Camera
i2c = board.I2C()
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
amg8833 = adafruit_amg88xx.AMG88XX(i2c)
# Load the text font from the fonts folder

4
PyLeap_CPB_EyeLights_LED_Glasses_RainbowSwirl/code.py
View file

@ -6,7 +6,9 @@ from rainbowio import colorwheel
from adafruit_is31fl3741.adafruit_ledglasses import LED_Glasses
import adafruit_is31fl3741
glasses = LED_Glasses(board.I2C(), allocate=adafruit_is31fl3741.MUST_BUFFER)
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
glasses = LED_Glasses(i2c, allocate=adafruit_is31fl3741.MUST_BUFFER)
wheeloffset = 0
while True:

4
PyLeap_CPB_EyeLights_LED_Glasses_Sparkle/code.py
View file

@ -9,7 +9,9 @@ from adafruit_led_animation.sequence import AnimationSequence
from adafruit_is31fl3741.adafruit_ledglasses import MUST_BUFFER, LED_Glasses
from adafruit_is31fl3741.led_glasses_animation import LED_Glasses_Animation
glasses = LED_Glasses(board.I2C(), allocate=MUST_BUFFER)
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
glasses = LED_Glasses(i2c, allocate=MUST_BUFFER)
glasses.set_led_scaling(255)
glasses.global_current = 0xFE
glasses.enable = True

3
Pylint_and_CircuitPython/pylint_example.py
View file

@ -12,7 +12,8 @@ import adafruit_thermistor
pixels = neopixel.NeoPixel(board.NEOPIXEL, 10, brightness=0.2)
i2c = board.I2C()
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
int1 = digitalio.DigitalInOut(board.ACCELEROMETER_UNTERRUPT)
lis3dh = adafruit_lis3dh.LIS3DH_I2C(i2c, int1=int1)

1
QT2040_Trinkey/U2IF_I2C_Example/code.py
View file

@ -13,6 +13,7 @@ import board
import adafruit_mcp9808
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
mcp9808 = adafruit_mcp9808.MCP9808(i2c)
while True:

4
QT_Py_Timer/QT_Py_Activity_Timer/code.py
View file

@ -36,7 +36,9 @@ up_threshold = 8
number_of_pixels = 32
# Set up accelerometer and LEDs.
lis3dh = adafruit_lis3dh.LIS3DH_I2C(board.I2C())
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
lis3dh = adafruit_lis3dh.LIS3DH_I2C(i2c)
pixels = neopixel.NeoPixel(board.A3, number_of_pixels, brightness=led_brightness)
pixels.fill(0) # Turn off the LEDs if they're on.

4
QT_Py_Timer/QT_Py_Hydration_Reminder/code.py
View file

@ -35,7 +35,9 @@ up_threshold = 8
number_of_pixels = 32
# Set up accelerometer and LEDs.
lis3dh = adafruit_lis3dh.LIS3DH_I2C(board.I2C())
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
lis3dh = adafruit_lis3dh.LIS3DH_I2C(i2c)
pixels = neopixel.NeoPixel(board.A3, number_of_pixels, brightness=led_brightness)
pixels.fill(0) # Turn off the LEDs if they're on.

4
Raspberry_Pi_Animated_Gif_Player/mini_pitft_player.py
View file

@ -15,7 +15,9 @@ import numpy # pylint: disable=unused-import
from adafruit_seesaw import seesaw, rotaryio, digitalio as ss_digitalio
from adafruit_rgb_display import st7789
seesaw = seesaw.Seesaw(board.I2C(), addr=0x36)
i2c = board.I2C() # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector on a microcontroller
seesaw = seesaw.Seesaw(i2c, addr=0x36)
seesaw_product = (seesaw.get_version() >> 16) & 0xFFFF
print("Found product {}".format(seesaw_product))