Adding I2S template code.

CircuitPython_Templates/i2s_mp3_playback/code.py

@@ -0,0 +1,28 @@
+"""
+CircuitPython I2S MP3 playback example.
+Plays a single MP3 once.
+
+Remove this line and all of the following docstring content before submitting to the Learn repo.
+
+Update the three I2S pins to match the wiring chosen for the microcontroller. If you are unsure of
+a proper I2S pin combination, run the pin combination script found here:
+https://adafru.it/i2s-pin-combo-finder
+
+Update the following pin names to a viable pin combination:
+* BIT_CLOCK_PIN
+* WORD_SELECT_PIN
+* DATA_PIN
+"""
+import board
+import audiomp3
+import audiobusio
+
+audio = audiobusio.I2SOut(board.BIT_CLOCK_PIN, board.WORD_SELECT_PIN, board.DATA_PIN)
+
+mp3 = audiomp3.MP3Decoder(open("slow.mp3", "rb"))
+
+audio.play(mp3)
+while audio.playing:
+    pass
+
+print("Done playing!")

CircuitPython_Templates/i2s_tone_playback/code.py

@@ -0,0 +1,38 @@
+"""
+CircuitPython I2S Tone playback example.
+Plays a tone for one second on, one
+second off, in a loop.
+
+Remove this line and all of the following docstring content before submitting to the Learn repo.
+
+Update the three I2S pins to match the wiring chosen for the microcontroller. If you are unsure of
+a proper I2S pin combination, run the pin combination script found here:
+https://adafru.it/i2s-pin-combo-finder
+
+Update the following pin names to a viable pin combination:
+* BIT_CLOCK_PIN
+* WORD_SELECT_PIN
+* DATA_PIN
+"""
+import time
+import array
+import math
+import audiocore
+import board
+import audiobusio
+
+audio = audiobusio.I2SOut(board.BIT_CLOCK_PIN, board.WORD_SELECT_PIN, board.DATA_PIN)
+
+tone_volume = 0.1  # Increase this to increase the volume of the tone.
+frequency = 440  # Set this to the Hz of the tone you want to generate.
+length = 8000 // frequency
+sine_wave = array.array("h", [0] * length)
+for i in range(length):
+    sine_wave[i] = int((math.sin(math.pi * 2 * i / length)) * tone_volume * (2 ** 15 - 1))
+sine_wave_sample = audiocore.RawSample(sine_wave)
+
+while True:
+    audio.play(sine_wave_sample, loop=True)
+    time.sleep(1)
+    audio.stop()
+    time.sleep(1)

CircuitPython_Templates/i2s_wav_playback/code.py

@@ -0,0 +1,41 @@
+"""
+CircuitPython I2S WAV file playback.
+Plays a WAV file for six seconds, pauses
+for two seconds, then resumes and plays
+the file to the end.
+
+Remove this line and all of the following docstring content before submitting to the Learn repo.
+
+Update the three I2S pins to match the wiring chosen for the microcontroller. If you are unsure of
+a proper I2S pin combination, run the pin combination script found here:
+https://adafru.it/i2s-pin-combo-finder
+
+Update the following pin names to a viable pin combination:
+* BIT_CLOCK_PIN
+* WORD_SELECT_PIN
+* DATA_PIN
+"""
+import time
+import audiocore
+import board
+import audiobusio
+
+audio = audiobusio.I2SOut(board.BIT_CLOCK_PIN, board.WORD_SELECT_PIN, board.DATA_PIN)
+
+wave_file = open("StreetChicken.wav", "rb")
+wav = audiocore.WaveFile(wave_file)
+
+print("Playing wav file!")
+audio.play(wav)
+t = time.monotonic()
+while time.monotonic() - t < 6:
+    pass
+
+print("Pausing!")
+audio.pause()
+time.sleep(2)
+print("Resuming!")
+audio.resume()
+while audio.playing:
+    pass
+print("Done!")