Update code.py
This commit is contained in:
Anne Barela
GitHub
parent
7e61cec67b
commit
8ad22e491e
1 changed files with 20 additions and 43 deletions
|
|
@ -1,4 +1,3 @@
|
|||
|
||||
"""
|
||||
Read the barometric reading in the air
|
||||
Visualize air reading changes over time as a color animation on a NeoPixel strip
|
||||
|
|
@ -15,7 +14,6 @@ import displayio
|
|||
from adafruit_display_text import label
|
||||
from adafruit_bitmap_font import bitmap_font
|
||||
|
||||
|
||||
num_leds = 79 #number of LEDs in your strip
|
||||
timeToCheck = 100 # set the amount of time between sensor checks. 7800 is approx. 1 hour
|
||||
|
||||
|
|
@ -31,7 +29,7 @@ max_reading = 975
|
|||
|
||||
"""
|
||||
# THERMOMETER RANGES (C)
|
||||
# set desired temperature range -- the NeoPixel palette choice will be determined by these thresholds
|
||||
# set desired temperature range - NeoPixel palette choice determined by these thresholds
|
||||
deviceType = 1
|
||||
min_reading = 25
|
||||
med_reading = 27
|
||||
|
|
@ -39,7 +37,7 @@ high_reading= 31
|
|||
max_reading = 33
|
||||
"""
|
||||
|
||||
#get an initial sensor reading
|
||||
# get an initial sensor reading
|
||||
if deviceType ==0:
|
||||
reading = clue.pressure
|
||||
else:
|
||||
|
|
@ -50,8 +48,8 @@ reading1 = reading
|
|||
reading2 = reading1
|
||||
reading3 = reading2
|
||||
counter = 0
|
||||
toggle = 1 #for on/off switch on button A
|
||||
displayOn = 1 #to turn the display on and off with button B
|
||||
toggle = 1 # for on/off switch on button A
|
||||
displayOn = 1 # to turn the display on and off with button B
|
||||
|
||||
clue.display.brightness = 0.8
|
||||
clue_display = displayio.Group(max_size=4)
|
||||
|
|
@ -98,34 +96,13 @@ clue_display.append(text_group)
|
|||
clue.display.show(clue_display)
|
||||
|
||||
# Define color Palettes
|
||||
waterPalette = [
|
||||
0x00d9ff,
|
||||
0x006f82,
|
||||
0x43bfb9,
|
||||
0x0066ff]
|
||||
icePalette = [
|
||||
0x8080FF,
|
||||
0x8080FF,
|
||||
0x8080FF,
|
||||
0x0000FF,
|
||||
0xC88AFF]
|
||||
sunPalette = [
|
||||
0xffaa00,
|
||||
0xffdd00,
|
||||
0x7d5b06,
|
||||
0xfffca8]
|
||||
firePalette = [
|
||||
0xff0000,
|
||||
0xff5500,
|
||||
0x8a3104,
|
||||
0xffaa00 ]
|
||||
forestPalette = [
|
||||
0xccffa8,
|
||||
0x69f505,
|
||||
0x05f551,
|
||||
0x2c8247]
|
||||
waterPalette = [0x00d9ff, 0x006f82, 0x43bfb9, 0x0066ff]
|
||||
icePalette = [0x8080FF, 0x8080FF, 0x8080FF, 0x0000FF, 0xC88AFF]
|
||||
sunPalette = [0xffaa00, 0xffdd00, 0x7d5b06, 0xfffca8]
|
||||
firePalette = [0xff0000, 0xff5500, 0x8a3104, 0xffaa00 ]
|
||||
forestPalette = [0xccffa8, 0x69f505, 0x05f551, 0x2c8247]
|
||||
|
||||
#set up default initial palettes, just for startup
|
||||
# set up default initial palettes, just for startup
|
||||
palette = forestPalette
|
||||
palette2 = waterPalette
|
||||
palette3 = icePalette
|
||||
|
|
@ -149,7 +126,7 @@ while True:
|
|||
pixels.brightness = 1.0
|
||||
clue.display.brightness = 0.8
|
||||
if clue.button_b:
|
||||
#Toggle only the display on and off
|
||||
# Toggle only the display on and off
|
||||
if displayOn == 0:
|
||||
clue.display.brightness = 0.8
|
||||
displayOn = 1
|
||||
|
|
@ -157,7 +134,7 @@ while True:
|
|||
clue.display.brightness = 0
|
||||
displayOn = 0
|
||||
|
||||
#assign color palette to NeoPixel section 1 based on the current reading reading
|
||||
# assign color palette to NeoPixel section 1 based on the current reading reading
|
||||
if reading1 < min_reading:
|
||||
palette = firePalette
|
||||
elif reading1 > min_reading and reading1 < med_reading:
|
||||
|
|
@ -168,7 +145,7 @@ while True:
|
|||
palette = waterPalette
|
||||
else:
|
||||
palette = icePalette
|
||||
#Map colors to pixels. Adjust range numbers to light up specific pixels. This configuration
|
||||
# Map colors to pixels. Adjust range numbers to light up specific pixels. This configuration
|
||||
# maps to a reflected gradient, with pixel 0 in the upper left corner
|
||||
# Load each pixel's color from the palette using an offset, run it
|
||||
# through the gamma function, pack RGB value and assign to pixel.
|
||||
|
|
@ -226,35 +203,35 @@ while True:
|
|||
timer_label.text = "{}".format(counter)
|
||||
clue.display.show(clue_display)
|
||||
|
||||
#Is it time to update?
|
||||
# Is it time to update?
|
||||
if counter > timeToCheck:
|
||||
#This moves the current data to the "1 hour old" section of pixels and the "1 hour old" data
|
||||
#to the "2 hours old" section of pixels
|
||||
# This moves the current data to the "1 hour old" section of pixels and the "1 hour old"
|
||||
# data to the "2 hours old" section of pixels
|
||||
palette3 = palette2
|
||||
palette2 = palette
|
||||
reading3 = reading2
|
||||
reading2 = reading1
|
||||
reading1 = reading
|
||||
#take a new sensor reading and reset the counter
|
||||
# take a new sensor reading and reset the counter
|
||||
if deviceType == 0:
|
||||
reading = clue.pressure
|
||||
else:
|
||||
reading = clue.temperature
|
||||
counter = 0
|
||||
#if reading is rising, show rising image and position text at the bottom
|
||||
# if reading is rising, show rising image and position text at the bottom
|
||||
if reading1 > reading2:
|
||||
sinking_sprite.x = 300
|
||||
reading_label.y = 134
|
||||
reading2_label.y = 164
|
||||
reading3_label.y = 194
|
||||
timer_label.y = 224
|
||||
#if reading is falling, show sinking image and position text at the top
|
||||
# if reading is falling, show sinking image and position text at the top
|
||||
elif reading2 < reading3: #reading is falling
|
||||
sinking_sprite.x = 0
|
||||
reading_label.y = 24
|
||||
reading2_label.y = 54
|
||||
reading3_label.y = 84
|
||||
timer_label.y = 114
|
||||
#otherwise keep counting up
|
||||
# otherwise keep counting up
|
||||
else:
|
||||
counter = counter + 1
|
||||
|
|
|
|||
Loading…
Reference in a new issue