Added SPDX to 30 more files - spdx-31

Adafruit_ESP32S2_TFT_WebServer/Adafruit_ESP32S2_TFT_WebServer.ino

@@ -1,3 +1,7 @@
+// SPDX-FileCopyrightText: 2015 Hristo Gochkov
+//
+// SPDX-License-Identifier: LGPL-2.1-or-later
+
 /*
   TFT SPI Flash Server - Example WebServer with internal SPI flash storage
     for Adafruit ESP32-S2 TFT Feather

Adafruit_Proximity_Trinkey/Capacitive_Touch_One_Pad/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2021 Kattni Rembor for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 """
 CircuitPython Capacitive Touch Pad Example - Print to the serial console when one pad is touched.
 """

Adafruit_Proximity_Trinkey/Capacitive_Touch_Two_Pad/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2021 Kattni Rembor for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 """
 CircuitPython Capacitive Two Touch Pad Example - Print to the serial console when a pad is touched.
 """

Adafruit_Proximity_Trinkey/NeoPixel_Blink/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2021 Kattni Rembor for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 """
 CircuitPython NeoPixel Blink example - blinking the built-in NeoPixels.
 """

Adafruit_Proximity_Trinkey/NeoPixel_Brightness/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2021 Kattni Rembor for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 """
 NeoPixel brightness proximity example. Increases the brightness of the NeoPixels as you move closer
 to the proximity sensor.

Adafruit_Proximity_Trinkey/Proximity_Spacebar_Game/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2021 Kattni Rembor for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 """
 Proximity spacebar dino game example. Sends a space when you move your hand close to the proximity
 sensor and turns the LEDs on to let you know you're in the right range. For use with the Chrome

Adafruit_Proximity_Trinkey/Proximity_Trinkey_Arduino_Demo/Proximity_Trinkey_Arduino_Demo.ino

@@ -1,106 +1,110 @@
-#include <Adafruit_NeoPixel.h>
-#include "Adafruit_FreeTouch.h"
-#include "Adafruit_APDS9960.h"
-
-
-// Create the neopixel strip with the built in definitions NUM_NEOPIXEL and PIN_NEOPIXEL
-Adafruit_NeoPixel strip = Adafruit_NeoPixel(NUM_NEOPIXEL, PIN_NEOPIXEL, NEO_GRB + NEO_KHZ800);
-int16_t neo_brightness = 20; // initialize with 20 brightness (out of 255)
-
-// Create the two touch pads on pins 1 and 2:
-Adafruit_FreeTouch qt_1 = Adafruit_FreeTouch(1, OVERSAMPLE_4, RESISTOR_50K, FREQ_MODE_NONE);
-Adafruit_FreeTouch qt_2 = Adafruit_FreeTouch(2, OVERSAMPLE_4, RESISTOR_50K, FREQ_MODE_NONE);
-
-Adafruit_APDS9960 apds;
-
-void setup() {
-  Serial.begin(9600);
-  //while (!Serial);
-  
-  strip.begin();
-  strip.setBrightness(neo_brightness);
-  strip.show(); // Initialize all pixels to 'off'
-
-  if (! qt_1.begin())  
-    Serial.println("Failed to begin qt on pin 1");
-  if (! qt_2.begin())  
-    Serial.println("Failed to begin qt on pin 2");
-
-  pinMode(PIN_INTERRUPT, INPUT_PULLUP);
-  if(!apds.begin()){
-    Serial.println("failed to initialize device! Please check your wiring.");
-    while (1) {
-      strip.fill(0xFF0000);
-      strip.show();
-      delay(100);
-      strip.fill(0x00);
-      strip.show();
-      delay(100);
-    }
-  }
-  
-  Serial.println("APDS initialized!");
-  apds.enableProximity(true);
-  apds.setProxGain(APDS9960_PGAIN_8X);
-  apds.setLED(APDS9960_LEDDRIVE_100MA, APDS9960_LEDBOOST_300PCNT);
-  apds.setProxPulse(APDS9960_PPULSELEN_16US, 1);
-
-  //set the interrupt threshold to fire when proximity reading goes above 2
-  apds.setProximityInterruptThreshold(0, 2);
-  apds.enableProximityInterrupt();
-}
-
-uint8_t j=0;
-
-void loop() {
-
-  // print the proximity reading when the interrupt pin goes low
-  if (!digitalRead(PIN_INTERRUPT)){
-    uint16_t prox = apds.readProximity();
-    Serial.print("Proximity: ");
-    Serial.println(prox);
-
-    if (prox < 3) prox = 0;  // ignore 1 and 2 readings
-    strip.setBrightness(prox);
-
-    //clear the interrupt
-    apds.clearInterrupt();
-  } else {
-    strip.setBrightness(0);
-  }
-
-  strip.fill(Wheel(j));
-  strip.show();
-
-  // measure the captouches
-  uint16_t touch1 = qt_1.measure();
-  uint16_t touch2 = qt_2.measure();
-
-  // If the first pad is touched, go forward
-  if (touch1 > 500) {
-    Serial.println("QT 1 touched");
-    j++;
-  }
-
-  // If the second pad is touched, go backward
-  if (touch2 > 500) {
-    Serial.println("QT 2 touched");
-    j--;
-  }
-
-  delay(10);
-}
-
-// Input a value 0 to 255 to get a color value.
-// The colours are a transition r - g - b - back to r.
-uint32_t Wheel(byte WheelPos) {
-  if(WheelPos < 85) {
-   return strip.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
-  } else if(WheelPos < 170) {
-   WheelPos -= 85;
-   return strip.Color(255 - WheelPos * 3, 0, WheelPos * 3);
-  } else {
-   WheelPos -= 170;
-   return strip.Color(0, WheelPos * 3, 255 - WheelPos * 3);
-  }
-}
+// SPDX-FileCopyrightText: 2021 Kattni Rembor for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include <Adafruit_NeoPixel.h>
+#include "Adafruit_FreeTouch.h"
+#include "Adafruit_APDS9960.h"
+
+
+// Create the neopixel strip with the built in definitions NUM_NEOPIXEL and PIN_NEOPIXEL
+Adafruit_NeoPixel strip = Adafruit_NeoPixel(NUM_NEOPIXEL, PIN_NEOPIXEL, NEO_GRB + NEO_KHZ800);
+int16_t neo_brightness = 20; // initialize with 20 brightness (out of 255)
+
+// Create the two touch pads on pins 1 and 2:
+Adafruit_FreeTouch qt_1 = Adafruit_FreeTouch(1, OVERSAMPLE_4, RESISTOR_50K, FREQ_MODE_NONE);
+Adafruit_FreeTouch qt_2 = Adafruit_FreeTouch(2, OVERSAMPLE_4, RESISTOR_50K, FREQ_MODE_NONE);
+
+Adafruit_APDS9960 apds;
+
+void setup() {
+  Serial.begin(9600);
+  //while (!Serial);
+  
+  strip.begin();
+  strip.setBrightness(neo_brightness);
+  strip.show(); // Initialize all pixels to 'off'
+
+  if (! qt_1.begin())  
+    Serial.println("Failed to begin qt on pin 1");
+  if (! qt_2.begin())  
+    Serial.println("Failed to begin qt on pin 2");
+
+  pinMode(PIN_INTERRUPT, INPUT_PULLUP);
+  if(!apds.begin()){
+    Serial.println("failed to initialize device! Please check your wiring.");
+    while (1) {
+      strip.fill(0xFF0000);
+      strip.show();
+      delay(100);
+      strip.fill(0x00);
+      strip.show();
+      delay(100);
+    }
+  }
+  
+  Serial.println("APDS initialized!");
+  apds.enableProximity(true);
+  apds.setProxGain(APDS9960_PGAIN_8X);
+  apds.setLED(APDS9960_LEDDRIVE_100MA, APDS9960_LEDBOOST_300PCNT);
+  apds.setProxPulse(APDS9960_PPULSELEN_16US, 1);
+
+  //set the interrupt threshold to fire when proximity reading goes above 2
+  apds.setProximityInterruptThreshold(0, 2);
+  apds.enableProximityInterrupt();
+}
+
+uint8_t j=0;
+
+void loop() {
+
+  // print the proximity reading when the interrupt pin goes low
+  if (!digitalRead(PIN_INTERRUPT)){
+    uint16_t prox = apds.readProximity();
+    Serial.print("Proximity: ");
+    Serial.println(prox);
+
+    if (prox < 3) prox = 0;  // ignore 1 and 2 readings
+    strip.setBrightness(prox);
+
+    //clear the interrupt
+    apds.clearInterrupt();
+  } else {
+    strip.setBrightness(0);
+  }
+
+  strip.fill(Wheel(j));
+  strip.show();
+
+  // measure the captouches
+  uint16_t touch1 = qt_1.measure();
+  uint16_t touch2 = qt_2.measure();
+
+  // If the first pad is touched, go forward
+  if (touch1 > 500) {
+    Serial.println("QT 1 touched");
+    j++;
+  }
+
+  // If the second pad is touched, go backward
+  if (touch2 > 500) {
+    Serial.println("QT 2 touched");
+    j--;
+  }
+
+  delay(10);
+}
+
+// Input a value 0 to 255 to get a color value.
+// The colours are a transition r - g - b - back to r.
+uint32_t Wheel(byte WheelPos) {
+  if(WheelPos < 85) {
+   return strip.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
+  } else if(WheelPos < 170) {
+   WheelPos -= 85;
+   return strip.Color(255 - WheelPos * 3, 0, WheelPos * 3);
+  } else {
+   WheelPos -= 170;
+   return strip.Color(0, WheelPos * 3, 255 - WheelPos * 3);
+  }
+}

Blues_Playground/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2018 Anne Barela for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 # Blues Playground Instrument
 # 2018-06-19 v03
 

Breath_Mask/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2018 Mikey Sklar for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 import time
 
 import adafruit_CCS811

Buckaroo_Plant_Care_Bot/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2020 John Park for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 # Bonsai Buckaroo + CLUE Plant Care Bot
 
 import time

CPB_NeoPixel_Wooden_Xmas_Tree/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2019 Liz Clark for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 import random
 import board
 import neopixel

CircuitPython_BLE_Darksaber/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2021 Liz Clark for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 """
 Prop-Maker based Darksaber
 Adapted from the Prop-Maker based Master Sword code

Compost_Friend/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2018 Isaac Wellish for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 # Author: Isaac Wellish
 # Code adapted from Tony Dicola's CircuitPython code using the DS18x20 temp sensor
 # as well as John Park's CircuitPython code determining soil moisture from nails

Daily_Cheer_Automaton/CircuitPython/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2020 Andy Doro for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 # AUTOCHEER DEVICE
 # code by Andy Doro
 #

Daily_Cheer_Automaton/autocheer/autocheer.ino

@@ -1,3 +1,7 @@
+// SPDX-FileCopyrightText: 2020 Andy Doro for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
 /*
     AUTOCHEER DEVICE
     ---

IoT_Environment_Sensor/aio.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2019 Dave Astels for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 """
 IoT environmental sensor node.
 

IoT_Environment_Sensor/air_quality.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2019 Dave Astels for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 """
 IoT environmental sensor node.
 

IoT_Environment_Sensor/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2019 Dave Astels for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 """
 IoT environmental sensor node.
 

IoT_Environment_Sensor/gps.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2019 Dave Astels for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 """
 IoT environmental sensor node.
 

IoT_Environment_Sensor/secrets.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2019 Dave Astels for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 # This file is where you keep secret settings, passwords, and tokens!
 # If you put them in the code you risk committing that info or sharing it
 

MP3_Tap_Player/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2020 John Park for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 # MP3 playback with tap trigger
 # Works on Feather M4 (or other M4 based boards) with Propmaker
 import time

MagTag_CircuitPython_Smart_Holiday_Lights/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2020 Kattni Rembor for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 import board
 import digitalio
 import neopixel

Matrix_On_Air/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2020 John Park for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 # ON AIR sign for YouTube livestreaming
 # Runs on Airlift Metro M4 with 64x32 RGB Matrix display & shield
 

Metro_Matrix_Clock/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2020 John Park for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 # Metro Matrix Clock
 # Runs on Airlift Metro M4 with 64x32 RGB Matrix display & shield
 

Neopixel_Aquarium/Neopixel_Aquarium.ino

@@ -1,3 +1,7 @@
+// SPDX-FileCopyrightText: 2018 Erin St Blaine for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
 // Code by Erin St. Blaine for Adafruit Industries
 // NeoPixel Aquarium Tutorial: https://learn.adafruit.com/neopixel-aquarium-with-submersible-lights/
 // For QT Py board

PyBadge_Conference_Badge/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2019 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 """
 This is a Conference Badge type Name Tag that is intended to be displayed on
 the PyBadge. Feel free to customize it to your heart's content.

Sound_Reactive_NeoPixel_Peace_Pendant/Sound_Reactive_NeoPixel_Peace_Pendant.ino

@@ -1,3 +1,7 @@
+// SPDX-FileCopyrightText: 2017 Limor Fried for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
 #include <Adafruit_NeoPixel.h>
 
 #define N_PIXELS  12  // Number of pixels you are using

Sound_Reactive_NeoPixel_Peace_Pendant/code.py

@@ -1,3 +1,7 @@
+# SPDX-FileCopyrightText: 2017 Limor Fried for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
 import array
 from rainbowio import colorwheel
 import board

Stream_Deck_Message_Panel/MessagePanel/MessagePanel.ino

@@ -1,3 +1,7 @@
+// SPDX-FileCopyrightText: 2019 Melissa LeBlanc-Williams for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
 // Message Panel
 // Reads an Adafruit IO Feed, then formats and displays the message
 // Author: Melissa LeBlanc-Williams

Stream_Deck_Message_Panel/MessagePanel/config.h

@@ -1,3 +1,7 @@
+// SPDX-FileCopyrightText: 2019 Melissa LeBlanc-Williams for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
 /************************ Adafruit IO Config *******************************/
 
 // visit io.adafruit.com if you need to create an account,