add mqtt aio code

Adafruit_IO_Power_Relay/code.py

@@ -0,0 +1,136 @@
+import time
+import board
+import busio
+from digitalio import DigitalInOut
+import neopixel
+from adafruit_esp32spi import adafruit_esp32spi
+from adafruit_esp32spi import adafruit_esp32spi_wifimanager
+import adafruit_esp32spi.adafruit_esp32spi_socket as socket
+
+import adafruit_minimqtt.adafruit_minimqtt as MQTT
+
+### WiFi ###
+
+# Get wifi details and more from a secrets.py file
+try:
+    from secrets import secrets
+except ImportError:
+    print("WiFi secrets are kept in secrets.py, please add them there!")
+    raise
+
+# If you are using a board with pre-defined ESP32 Pins:
+esp32_cs = DigitalInOut(board.ESP_CS)
+esp32_ready = DigitalInOut(board.ESP_BUSY)
+esp32_reset = DigitalInOut(board.ESP_RESET)
+
+# If you have an externally connected ESP32:
+# esp32_cs = DigitalInOut(board.D9)
+# esp32_ready = DigitalInOut(board.D10)
+# esp32_reset = DigitalInOut(board.D5)
+
+spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
+esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
+"""Use below for Most Boards"""
+status_light = neopixel.NeoPixel(
+    board.NEOPIXEL, 1, brightness=0.2
+)  # Uncomment for Most Boards
+"""Uncomment below for ItsyBitsy M4"""
+# status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
+# Uncomment below for an externally defined RGB LED
+# import adafruit_rgbled
+# from adafruit_esp32spi import PWMOut
+# RED_LED = PWMOut.PWMOut(esp, 26)
+# GREEN_LED = PWMOut.PWMOut(esp, 27)
+# BLUE_LED = PWMOut.PWMOut(esp, 25)
+# status_light = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
+wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
+
+# Set up a pin for controlling the relay
+power_pin = DigitalInOut(board.D3)
+power_pin.switch_to_output()
+
+### Feeds ###
+# Set up a feed named Relay for subscribing to the relay feed on Adafruit IO
+feed_relay = secrets["aio_username"] + "/feeds/relay"
+
+### Code ###
+
+# Define callback methods which are called when events occur
+# pylint: disable=unused-argument, redefined-outer-name
+def connected(client, userdata, flags, rc):
+    # This function will be called when the client is connected
+    # successfully to the broker.
+    print("Connected to Adafruit IO!")
+
+
+def disconnected(client, userdata, rc):
+    # This method is called when the client is disconnected
+    print("Disconnected from Adafruit IO!")
+
+
+def subscribe(client, userdata, topic, granted_qos):
+    # This method is called when the client subscribes to a new feed.
+    print("Subscribed to {0}".format(topic))
+
+
+def unsubscribe(client, userdata, topic, pid):
+    # This method is called when the client unsubscribes from a feed.
+    print("Unsubscribed from {0} with PID {1}".format(topic, pid))
+
+
+def on_relay_msg(client, topic, message):
+    # Called when feeds/relay has a new value
+    print("Received relay value: ", message)
+    if message == "ON":
+        power_pin.value = True
+    elif message == "OFF":
+        power_pin.value = False
+    else:
+        print("Unexpected message received on /feeds/relay.")
+
+def on_message(client, topic, message):
+    # Method callled when a client's subscribed feed has a new value.
+    print("New message on topic {0}: {1}".format(topic, message))
+
+
+# Connect to WiFi
+print("Connecting to WiFi...")
+wifi.connect()
+print("Connected!")
+
+MQTT.set_socket(socket, esp)
+
+# Set up a MiniMQTT Client
+client = MQTT.MQTT(
+    broker="io.adafruit.com",
+    username=secrets["aio_username"],
+    password=secrets["aio_key"],
+)
+
+# Setup the callback methods above
+client.on_connect = connected
+client.on_disconnect = disconnected
+client.on_subscribe = subscribe
+client.on_unsubscribe = unsubscribe
+client.on_message = on_message
+# Add a callback to the relay feed
+client.add_topic_callback(feed_relay, on_relay_msg)
+
+# Connect the client to Adafruit IO
+print("Connecting to Adafruit IO...")
+client.connect()
+
+# Subscribe to all updates on relay feed
+client.subscribe(feed_relay)
+
+# Start a blocking message loop...
+# NOTE: NO code below this loop will execute
+while True:
+    try:
+        client.loop()
+    except (ValueError, RuntimeError) as e:
+        print("Failed to get data, retrying\n", e)
+        wifi.reset()
+        client.reconnect()
+        continue
+    time.sleep(0.5)