From cba57f608ee84cb8d2bcd129e2a25f0669f0e75c Mon Sep 17 00:00:00 2001
From: Liz <liz@adafruit.com>
Date: Wed, 6 Sep 2023 15:15:55 -0400
Subject: [PATCH] remove comment

removing comment about other boards
---
 .../SPI_Breakout_Flash_Info.ino               | 55 -------------------
 1 file changed, 55 deletions(-)

diff --git a/SPI_Breakout_Flash_Info/SPI_Breakout_Flash_Info.ino b/SPI_Breakout_Flash_Info/SPI_Breakout_Flash_Info.ino
index 49129d5f0..bab9aa4bc 100644
--- a/SPI_Breakout_Flash_Info/SPI_Breakout_Flash_Info.ino
+++ b/SPI_Breakout_Flash_Info/SPI_Breakout_Flash_Info.ino
@@ -15,55 +15,6 @@
 Adafruit_FlashTransport_SPI flashTransport(CS_PIN, SPI);
 Adafruit_SPIFlash flash(&flashTransport);
 
-/*  If you want to use a specific flash device, for example for a custom built
- board, first look for it in Adafruit_SPIFlash\src\flash_devices.h
- *  If it isn't in there you need to create your own definition like the
- W25Q80DLX_EXAMPLE example below.
- *  These definitions need to be edited to match information on the data sheet
- of the flash device that you want to use.
- *  If you are not sure what the manufacture ID, memory type and capacity values
- should be, try running the sketch anyway and look at the serial output
- *  The flash device will report these values to you as a single hexadecimal
- value (the JDEC ID)
- *  For example, the first device on the list - the W25Q80DLX - will report its
- JDEC ID as 0xef4014, which is made of these three values:
- *  manufacturer_id = 0xef
- *  memory_type     = 0x40
- *  capacity        = 0x14
- *  With this macro properly defined you can then create an array of device
- definitions as shown below, this can include any from the list of devices in
- flash_devices.h, and any you define yourself here
- *  You need to update the variable on line 71 to reflect the number of items in
- the array
- *  You also need to uncomment line 84 and comment out line 81 so this array
- will be passed to the flash memory driver.
- *
- *  Example of a user defined flash memory device:
-    #define W25Q80DLX_EXAMPLE                                                \
-      {                                                                      \
-        .total_size = 1*1024*1024,                                           \
-            .start_up_time_us = 5000, .manufacturer_id = 0xef,               \
-        .memory_type = 0x40, .capacity = 0x14, .max_clock_speed_mhz = 80,    \
-        .quad_enable_bit_mask = 0x02, .has_sector_protection = false,        \
-        .supports_fast_read = true, .supports_qspi = true,                   \
-        .supports_qspi_writes = false, .write_status_register_split = false, \
-        .single_status_byte = false, .is_fram = false,                       \
-      }
- */
-
-/*
- * Create an array of data structures and fill it with the settings we defined
- * above. We are using two devices, but more can be added if you want.
- */
-// static const SPIFlash_Device_t my_flash_devices[] = {
-//     W25Q80DLX_EXAMPLE,
-// };
-/*
- * Specify the number of different devices that are listed in the array we just
- * created. If you add more devices to the array, update this value to match.
- */
-// const int flashDevices = 1;
-
 // the setup function runs once when you press reset or power the board
 void setup() {
   Serial.begin(115200);
@@ -74,12 +25,6 @@ void setup() {
   Serial.println("Adafruit Serial Flash Info example");
   flash.begin();
 
-  // Using a flash device not already listed? Start the flash memory by passing
-  // it the array of device settings defined above, and the number of elements
-  // in the array.
-
-  // flash.begin(my_flash_devices, flashDevices);
-
   Serial.print("JEDEC ID: 0x");
   Serial.println(flash.getJEDECID(), HEX);
   Serial.print("Flash size: ");