adding code for the food scale learn guide
Adding main code and callibration.py file for the NAU7802 Food Scale learn guide.
This commit is contained in:
BlitzCityDIY
parent
028d5c3796
commit
f88d22d088
2 changed files with 318 additions and 0 deletions
4
NAU7802_Food_Scale/callibration.py
Normal file
4
NAU7802_Food_Scale/callibration.py
Normal file
|
|
@ -0,0 +1,4 @@
|
|||
callibration = {
|
||||
'offset_val' : 60.8006, # default offset for 6 lbs
|
||||
'weight' : 2721.55 # 6 lbs in grams
|
||||
}
|
||||
314
NAU7802_Food_Scale/code.py
Normal file
314
NAU7802_Food_Scale/code.py
Normal file
|
|
@ -0,0 +1,314 @@
|
|||
# SPDX-FileCopyrightText: 2022 Liz Clark for Adafruit Industries
|
||||
# SPDX-License-Identifier: MIT
|
||||
|
||||
import time
|
||||
import board
|
||||
from digitalio import DigitalInOut, Direction, Pull
|
||||
from adafruit_ht16k33.segments import Seg14x4
|
||||
from cedargrove_nau7802 import NAU7802
|
||||
from callibration import callibration
|
||||
|
||||
# I2C setup with STEMMA port
|
||||
i2c = board.STEMMA_I2C()
|
||||
# alphanumeric segment displpay setup
|
||||
# using two displays together
|
||||
display = Seg14x4(i2c, address=(0x71, 0x70))
|
||||
# start-up text
|
||||
display.print("*HELLO* ")
|
||||
# button LEDs
|
||||
blue = DigitalInOut(board.A0)
|
||||
blue.direction = Direction.OUTPUT
|
||||
green = DigitalInOut(board.A2)
|
||||
green.direction = Direction.OUTPUT
|
||||
# buttons setup
|
||||
blue_btn = DigitalInOut(board.A1)
|
||||
blue_btn.direction = Direction.INPUT
|
||||
blue_btn.pull = Pull.UP
|
||||
green_btn = DigitalInOut(board.A3)
|
||||
green_btn.direction = Direction.INPUT
|
||||
green_btn.pull = Pull.UP
|
||||
# nau7802 setup
|
||||
nau7802 = NAU7802(board.STEMMA_I2C(), address=0x2A, active_channels=2)
|
||||
nau7802.gain = 128
|
||||
enabled = nau7802.enable(True)
|
||||
|
||||
# zeroing function
|
||||
def zero_channel():
|
||||
"""Initiate internal calibration for current channel; return raw zero
|
||||
offset value. Use when scale is started, a new channel is green_btned, or to
|
||||
adjust for measurement drift. Remove weight and tare from load cell before
|
||||
executing."""
|
||||
blue.value = True
|
||||
print(
|
||||
"channel %1d calibrate.INTERNAL: %5s"
|
||||
% (nau7802.channel, nau7802.calibrate("INTERNAL"))
|
||||
)
|
||||
blue.value = False
|
||||
print(
|
||||
"channel %1d calibrate.OFFSET: %5s"
|
||||
% (nau7802.channel, nau7802.calibrate("OFFSET"))
|
||||
)
|
||||
blue.value = True
|
||||
zero_offset = read_raw_value(100) # Read 100 samples to establish zero offset
|
||||
print("...channel %1d zeroed" % nau7802.channel)
|
||||
blue.value = False
|
||||
return zero_offset
|
||||
# read raw value function
|
||||
def read_raw_value(samples=100):
|
||||
"""Read and average consecutive raw sample values. Return average raw value."""
|
||||
sample_sum = 0
|
||||
sample_count = samples
|
||||
while sample_count > 0:
|
||||
if nau7802.available:
|
||||
sample_sum = sample_sum + nau7802.read()
|
||||
sample_count -= 1
|
||||
return int(sample_sum / samples)
|
||||
# function for finding the average of an array
|
||||
def find_average(num):
|
||||
count = 0
|
||||
for n in num:
|
||||
count = count + n
|
||||
average = count / len(num)
|
||||
return average
|
||||
# callibration function
|
||||
def calculateCallibration(array):
|
||||
for _ in range(10):
|
||||
blue.value = True
|
||||
green.value = False
|
||||
nau7802.channel = 1
|
||||
#value = read_raw_value()
|
||||
print("channel %1.0f raw value: %7.0f" % (nau7802.channel, read_raw_value()))
|
||||
array.append(read_raw_value())
|
||||
blue.value = False
|
||||
green.value = True
|
||||
time.sleep(1)
|
||||
green.value = False
|
||||
avg = find_average(array)
|
||||
return avg
|
||||
# blink LED function
|
||||
def blink(led, amount, count):
|
||||
for _ in range(count):
|
||||
led.value = True
|
||||
time.sleep(amount)
|
||||
led.value = False
|
||||
time.sleep(amount)
|
||||
|
||||
# zeroing on startup
|
||||
display.fill(0)
|
||||
display.marquee("CLEAR SCALE CLEAR", 0.3, False)
|
||||
time.sleep(2)
|
||||
display.fill(0)
|
||||
display.print("ZEROING")
|
||||
time.sleep(3)
|
||||
# zeroing each channel
|
||||
nau7802.channel = 1
|
||||
zero_channel() # Calibrate and zero channel
|
||||
nau7802.channel = 2
|
||||
zero_channel() # Calibrate and zero channel
|
||||
display.fill(0)
|
||||
display.print("STARTING")
|
||||
|
||||
# variables and states
|
||||
clock = time.monotonic() # time.monotonic() device
|
||||
mode = "run"
|
||||
mode_names = ["SHOW OZ?", " GRAMS?", " ZERO?", "CALIBRTE", " OFFSET?"]
|
||||
#offset_val = callibration['offset_val']
|
||||
stage = 0
|
||||
weight_avg = 0
|
||||
zero_avg = 0
|
||||
show_oz = True
|
||||
show_grams = False
|
||||
zero_out = False
|
||||
callibrate_mode = False
|
||||
blue_btn_pressed = False
|
||||
green_btn_pressed = False
|
||||
run_mode = True
|
||||
|
||||
while True:
|
||||
# button debouncing
|
||||
if blue_btn.value and blue_btn_pressed:
|
||||
blue_btn_pressed = False
|
||||
if green_btn.value and green_btn_pressed:
|
||||
green_btn_pressed = False
|
||||
green.value = False
|
||||
# default run mode
|
||||
# checks NAU7802 every 2 seconds
|
||||
if run_mode is True and (time.monotonic() - clock) > 2:
|
||||
nau7802.channel = 1
|
||||
value = read_raw_value()
|
||||
# takes value reading and divides with by the offset value
|
||||
# to get the weight in grams
|
||||
grams = value / callibration['offset_val']
|
||||
# convert grams to ounces
|
||||
oz = grams / 28.35
|
||||
# display in ounces (default)
|
||||
if show_oz is True:
|
||||
if oz < 0:
|
||||
oz = 0
|
||||
display.print(" %0.2f oz" % oz)
|
||||
# display in grams
|
||||
if show_grams is True:
|
||||
if grams < 0:
|
||||
grams = 0
|
||||
display.print(" %0.2f g" % grams)
|
||||
clock = time.monotonic()
|
||||
# if you press the change mode button
|
||||
if (not green_btn.value and not green_btn_pressed) and run_mode:
|
||||
green.value = True
|
||||
# disables run mode (stops weighing)
|
||||
run_mode = False
|
||||
show_oz = False
|
||||
show_grams = False
|
||||
# mode is set to 0
|
||||
mode = 0
|
||||
# display shows the mode option
|
||||
display.print(mode_names[mode])
|
||||
blue.value = True
|
||||
green_btn_pressed = True
|
||||
# advances through the modes menu
|
||||
if (not green_btn.value and not green_btn_pressed) and mode != "run":
|
||||
green.value = True
|
||||
# counts up to 4 and loops back to 0
|
||||
mode = (mode+1) % 5
|
||||
# updates display
|
||||
display.print(mode_names[mode])
|
||||
green_btn_pressed = True
|
||||
# if you select show_oz
|
||||
if (not blue_btn.value and not blue_btn_pressed) and mode == 0:
|
||||
# show_oz is set as the state
|
||||
show_oz = True
|
||||
blue.value = False
|
||||
# goes back to weighing mode
|
||||
run_mode = True
|
||||
mode = "run"
|
||||
blue_btn_pressed = True
|
||||
# if you select show_grams
|
||||
if (not blue_btn.value and not blue_btn_pressed) and mode == 1:
|
||||
# show_grams is set as the state
|
||||
show_grams = True
|
||||
blue.value = False
|
||||
# goes back to weighing mode
|
||||
run_mode = True
|
||||
mode = "run"
|
||||
blue_btn_pressed = True
|
||||
# if you select zero_out
|
||||
if (not blue_btn.value and not blue_btn_pressed) and mode == 2:
|
||||
# zero_out is set as the state
|
||||
# can zero out the scale without full recallibration
|
||||
zero_out = True
|
||||
blue.value = False
|
||||
mode = "run"
|
||||
blue_btn_pressed = True
|
||||
# if you select callibrate_mode
|
||||
if (not blue_btn.value and not blue_btn_pressed) and mode == 3:
|
||||
# callibrate_mode is set as the state
|
||||
# starts up the callibration process
|
||||
callibrate_mode = True
|
||||
blue.value = False
|
||||
mode = "run"
|
||||
blue_btn_pressed = True
|
||||
# if you select the offset
|
||||
if (not blue_btn.value and not blue_btn_pressed) and mode == 4:
|
||||
# displays the curren offset value stored in the code
|
||||
blue.value = False
|
||||
display.fill(0)
|
||||
display.print("%0.4f" % callibration['offset_val'])
|
||||
time.sleep(5)
|
||||
mode = "run"
|
||||
# goes back to weighing mode
|
||||
run_mode = True
|
||||
show_oz = True
|
||||
blue_btn_pressed = True
|
||||
# if the zero_out state is true
|
||||
if zero_out and mode == "run":
|
||||
# updates display
|
||||
display.fill(0)
|
||||
display.print("ZEROING")
|
||||
blue.value = False
|
||||
# runs zero_channel() function on both channels
|
||||
nau7802.channel = 1
|
||||
zero_channel()
|
||||
nau7802.channel = 2
|
||||
zero_channel()
|
||||
display.fill(0)
|
||||
display.print("ZEROED ")
|
||||
zero_out = False
|
||||
# goes into weighing mode
|
||||
run_mode = True
|
||||
show_oz = True
|
||||
# the callibration process
|
||||
# each step is counted in stage
|
||||
# blue button is pressed to advance to the next stage
|
||||
if callibrate_mode is True and stage == 0:
|
||||
blue_btn_pressed = True
|
||||
# clear the scale for zeroing
|
||||
display.fill(0)
|
||||
display.print("REMOVE ")
|
||||
stage = 1
|
||||
blue.value = True
|
||||
# stage 2
|
||||
if (not blue_btn.value and not blue_btn_pressed) and stage == 1:
|
||||
blue_btn_pressed = True
|
||||
# runs the zero out function
|
||||
display.fill(0)
|
||||
display.print("ZEROING")
|
||||
blue.value = False
|
||||
nau7802.channel = 1
|
||||
zero_channel()
|
||||
nau7802.channel = 2
|
||||
zero_channel()
|
||||
display.fill(0)
|
||||
display.print("ZEROED ")
|
||||
stage = 2
|
||||
blue.value = True
|
||||
# stage 3
|
||||
if (not blue_btn.value and not blue_btn_pressed) and stage == 2:
|
||||
blue_btn_pressed = True
|
||||
blue.value = False
|
||||
display.print("STARTING")
|
||||
blink(blue, 0.5, 3)
|
||||
zero_readings = []
|
||||
display.print("AVG ZERO")
|
||||
# runs the calculateCallibration function
|
||||
# takes 10 raw readings, stores them into an array and gets an average
|
||||
zero_avg = calculateCallibration(zero_readings)
|
||||
stage = 3
|
||||
display.fill(0)
|
||||
display.print("DONE")
|
||||
blue.value = True
|
||||
# stage 4
|
||||
if (not blue_btn.value and not blue_btn_pressed) and stage == 3:
|
||||
# place the known weight item
|
||||
# item's weight matches callibration['weight'] in grams
|
||||
blue_btn_pressed = True
|
||||
blue.value = False
|
||||
display.fill(0)
|
||||
display.print("PUT ITEM")
|
||||
stage = 4
|
||||
blue.value = True
|
||||
# stage 5
|
||||
if (not blue_btn.value and not blue_btn_pressed) and stage == 4:
|
||||
blue_btn_pressed = True
|
||||
blue.value = False
|
||||
display.fill(0)
|
||||
display.print("WEIGHING")
|
||||
weight_readings = []
|
||||
# weighs the item 10 times, stores the readings in an array & averages them
|
||||
weight_avg = calculateCallibration(weight_readings)
|
||||
# calculates the new offset value
|
||||
callibration['offset_val'] = (weight_avg-zero_avg) / callibration['weight']
|
||||
display.marquee("%0.2f - CALLIBRATED " % callibration['offset_val'], 0.5, False)
|
||||
stage = 5
|
||||
display.fill(0)
|
||||
display.print("DONE")
|
||||
blue.value = True
|
||||
# final stage
|
||||
if (not blue_btn.value and not blue_btn_pressed) and stage == 5:
|
||||
blue_btn_pressed = True
|
||||
callibrate_mode = False
|
||||
blue.value = False
|
||||
# goes back into weighing mode
|
||||
show_oz = True
|
||||
run_mode = True
|
||||
# resets stage
|
||||
stage = 0
|
||||
Loading…
Reference in a new issue