Merge pull request #292 from tyeth/add-64x32-support-2025
Add 64x32 support 2025
This commit is contained in:
Tyeth Gundry
GitHub
commit
d64ad231f4
3 changed files with 430 additions and 5 deletions
|
|
@ -599,6 +599,9 @@ bool Adafruit_SSD1306::begin(uint8_t vcs, uint8_t addr, bool reset,
|
||||||
} else if ((WIDTH == 96) && (HEIGHT == 16)) {
|
} else if ((WIDTH == 96) && (HEIGHT == 16)) {
|
||||||
comPins = 0x2; // ada x12
|
comPins = 0x2; // ada x12
|
||||||
contrast = (vccstate == SSD1306_EXTERNALVCC) ? 0x10 : 0xAF;
|
contrast = (vccstate == SSD1306_EXTERNALVCC) ? 0x10 : 0xAF;
|
||||||
|
} else if ((WIDTH == 64) && (HEIGHT == 32)) {
|
||||||
|
comPins = 0x12; // ada x12
|
||||||
|
contrast = (vccstate == SSD1306_EXTERNALVCC) ? 0x10 : 0xCF;
|
||||||
} else {
|
} else {
|
||||||
// Other screen varieties -- TBD
|
// Other screen varieties -- TBD
|
||||||
}
|
}
|
||||||
|
|
@ -999,9 +1002,16 @@ void Adafruit_SSD1306::display(void) {
|
||||||
SSD1306_PAGEADDR,
|
SSD1306_PAGEADDR,
|
||||||
0, // Page start address
|
0, // Page start address
|
||||||
0xFF, // Page end (not really, but works here)
|
0xFF, // Page end (not really, but works here)
|
||||||
SSD1306_COLUMNADDR, 0}; // Column start address
|
SSD1306_COLUMNADDR}; // Column start address
|
||||||
ssd1306_commandList(dlist1, sizeof(dlist1));
|
ssd1306_commandList(dlist1, sizeof(dlist1));
|
||||||
ssd1306_command1(WIDTH - 1); // Column end address
|
|
||||||
|
if (WIDTH == 64) {
|
||||||
|
ssd1306_command1(0x20); // Column start
|
||||||
|
ssd1306_command1(0x20 + WIDTH - 1); // Column end address
|
||||||
|
} else {
|
||||||
|
ssd1306_command1(0); // Column start
|
||||||
|
ssd1306_command1((WIDTH - 1)); // Column end address
|
||||||
|
}
|
||||||
|
|
||||||
#if defined(ESP8266)
|
#if defined(ESP8266)
|
||||||
// ESP8266 needs a periodic yield() call to avoid watchdog reset.
|
// ESP8266 needs a periodic yield() call to avoid watchdog reset.
|
||||||
|
|
|
||||||
415
examples/ssd1306_64x32_i2c/ssd1306_64x32_i2c.ino
Normal file
415
examples/ssd1306_64x32_i2c/ssd1306_64x32_i2c.ino
Normal file
|
|
@ -0,0 +1,415 @@
|
||||||
|
/**************************************************************************
|
||||||
|
This is an example for our Monochrome OLEDs based on SSD1306 drivers
|
||||||
|
|
||||||
|
Pick one up today in the adafruit shop!
|
||||||
|
------> http://www.adafruit.com/category/63_98
|
||||||
|
|
||||||
|
This example is for a 128x32 pixel display using I2C to communicate
|
||||||
|
3 pins are required to interface (two I2C and one reset).
|
||||||
|
|
||||||
|
Adafruit invests time and resources providing this open
|
||||||
|
source code, please support Adafruit and open-source
|
||||||
|
hardware by purchasing products from Adafruit!
|
||||||
|
|
||||||
|
Written by Limor Fried/Ladyada for Adafruit Industries,
|
||||||
|
with contributions from the open source community.
|
||||||
|
BSD license, check license.txt for more information
|
||||||
|
All text above, and the splash screen below must be
|
||||||
|
included in any redistribution.
|
||||||
|
**************************************************************************/
|
||||||
|
|
||||||
|
#include <SPI.h>
|
||||||
|
#include <Wire.h>
|
||||||
|
#include <Adafruit_GFX.h>
|
||||||
|
#include <Adafruit_SSD1306.h>
|
||||||
|
|
||||||
|
#define SCREEN_WIDTH 64 // OLED display width, in pixels
|
||||||
|
#define SCREEN_HEIGHT 32 // OLED display height, in pixels
|
||||||
|
|
||||||
|
// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
|
||||||
|
// The pins for I2C are defined by the Wire-library.
|
||||||
|
// On an arduino UNO: A4(SDA), A5(SCL)
|
||||||
|
// On an arduino MEGA 2560: 20(SDA), 21(SCL)
|
||||||
|
// On an arduino LEONARDO: 2(SDA), 3(SCL), ...
|
||||||
|
#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)
|
||||||
|
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
|
||||||
|
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
|
||||||
|
|
||||||
|
#define NUMFLAKES 10 // Number of snowflakes in the animation example
|
||||||
|
|
||||||
|
#define LOGO_HEIGHT 16
|
||||||
|
#define LOGO_WIDTH 16
|
||||||
|
static const unsigned char PROGMEM logo_bmp[] =
|
||||||
|
{ 0b00000000, 0b11000000,
|
||||||
|
0b00000001, 0b11000000,
|
||||||
|
0b00000001, 0b11000000,
|
||||||
|
0b00000011, 0b11100000,
|
||||||
|
0b11110011, 0b11100000,
|
||||||
|
0b11111110, 0b11111000,
|
||||||
|
0b01111110, 0b11111111,
|
||||||
|
0b00110011, 0b10011111,
|
||||||
|
0b00011111, 0b11111100,
|
||||||
|
0b00001101, 0b01110000,
|
||||||
|
0b00011011, 0b10100000,
|
||||||
|
0b00111111, 0b11100000,
|
||||||
|
0b00111111, 0b11110000,
|
||||||
|
0b01111100, 0b11110000,
|
||||||
|
0b01110000, 0b01110000,
|
||||||
|
0b00000000, 0b00110000 };
|
||||||
|
|
||||||
|
void setup() {
|
||||||
|
Serial.begin(9600);
|
||||||
|
|
||||||
|
// SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
|
||||||
|
if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
|
||||||
|
Serial.println(F("SSD1306 allocation failed"));
|
||||||
|
for(;;); // Don't proceed, loop forever
|
||||||
|
}
|
||||||
|
|
||||||
|
// Show initial display buffer contents on the screen --
|
||||||
|
// the library initializes this with an Adafruit splash screen.
|
||||||
|
display.display();
|
||||||
|
delay(2000); // Pause for 2 seconds
|
||||||
|
|
||||||
|
// Clear the buffer
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
// Draw a single pixel in white
|
||||||
|
display.drawPixel(10, 10, SSD1306_WHITE);
|
||||||
|
|
||||||
|
// Show the display buffer on the screen. You MUST call display() after
|
||||||
|
// drawing commands to make them visible on screen!
|
||||||
|
display.display();
|
||||||
|
delay(2000);
|
||||||
|
// display.display() is NOT necessary after every single drawing command,
|
||||||
|
// unless that's what you want...rather, you can batch up a bunch of
|
||||||
|
// drawing operations and then update the screen all at once by calling
|
||||||
|
// display.display(). These examples demonstrate both approaches...
|
||||||
|
|
||||||
|
testdrawline(); // Draw many lines
|
||||||
|
|
||||||
|
testdrawrect(); // Draw rectangles (outlines)
|
||||||
|
|
||||||
|
testfillrect(); // Draw rectangles (filled)
|
||||||
|
|
||||||
|
testdrawcircle(); // Draw circles (outlines)
|
||||||
|
|
||||||
|
testfillcircle(); // Draw circles (filled)
|
||||||
|
|
||||||
|
testdrawroundrect(); // Draw rounded rectangles (outlines)
|
||||||
|
|
||||||
|
testfillroundrect(); // Draw rounded rectangles (filled)
|
||||||
|
|
||||||
|
testdrawtriangle(); // Draw triangles (outlines)
|
||||||
|
|
||||||
|
testfilltriangle(); // Draw triangles (filled)
|
||||||
|
|
||||||
|
testdrawchar(); // Draw characters of the default font
|
||||||
|
|
||||||
|
testdrawstyles(); // Draw 'stylized' characters
|
||||||
|
|
||||||
|
testscrolltext(); // Draw scrolling text
|
||||||
|
|
||||||
|
testdrawbitmap(); // Draw a small bitmap image
|
||||||
|
|
||||||
|
// Invert and restore display, pausing in-between
|
||||||
|
display.invertDisplay(true);
|
||||||
|
delay(1000);
|
||||||
|
display.invertDisplay(false);
|
||||||
|
delay(1000);
|
||||||
|
|
||||||
|
testanimate(logo_bmp, LOGO_WIDTH, LOGO_HEIGHT); // Animate bitmaps
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop() {
|
||||||
|
}
|
||||||
|
|
||||||
|
void testdrawline() {
|
||||||
|
int16_t i;
|
||||||
|
|
||||||
|
display.clearDisplay(); // Clear display buffer
|
||||||
|
|
||||||
|
for(i=0; i<display.width(); i+=4) {
|
||||||
|
display.drawLine(0, 0, i, display.height()-1, SSD1306_WHITE);
|
||||||
|
display.display(); // Update screen with each newly-drawn line
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
for(i=0; i<display.height(); i+=4) {
|
||||||
|
display.drawLine(0, 0, display.width()-1, i, SSD1306_WHITE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
delay(250);
|
||||||
|
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
for(i=0; i<display.width(); i+=4) {
|
||||||
|
display.drawLine(0, display.height()-1, i, 0, SSD1306_WHITE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
for(i=display.height()-1; i>=0; i-=4) {
|
||||||
|
display.drawLine(0, display.height()-1, display.width()-1, i, SSD1306_WHITE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
delay(250);
|
||||||
|
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
for(i=display.width()-1; i>=0; i-=4) {
|
||||||
|
display.drawLine(display.width()-1, display.height()-1, i, 0, SSD1306_WHITE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
for(i=display.height()-1; i>=0; i-=4) {
|
||||||
|
display.drawLine(display.width()-1, display.height()-1, 0, i, SSD1306_WHITE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
delay(250);
|
||||||
|
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
for(i=0; i<display.height(); i+=4) {
|
||||||
|
display.drawLine(display.width()-1, 0, 0, i, SSD1306_WHITE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
for(i=0; i<display.width(); i+=4) {
|
||||||
|
display.drawLine(display.width()-1, 0, i, display.height()-1, SSD1306_WHITE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
|
||||||
|
delay(2000); // Pause for 2 seconds
|
||||||
|
}
|
||||||
|
|
||||||
|
void testdrawrect(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
for(int16_t i=0; i<display.height()/2; i+=2) {
|
||||||
|
display.drawRect(i, i, display.width()-2*i, display.height()-2*i, SSD1306_WHITE);
|
||||||
|
display.display(); // Update screen with each newly-drawn rectangle
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
|
||||||
|
delay(2000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void testfillrect(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
for(int16_t i=0; i<display.height()/2; i+=3) {
|
||||||
|
// The INVERSE color is used so rectangles alternate white/black
|
||||||
|
display.fillRect(i, i, display.width()-i*2, display.height()-i*2, SSD1306_INVERSE);
|
||||||
|
display.display(); // Update screen with each newly-drawn rectangle
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
|
||||||
|
delay(2000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void testdrawcircle(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
for(int16_t i=0; i<max(display.width(),display.height())/2; i+=2) {
|
||||||
|
display.drawCircle(display.width()/2, display.height()/2, i, SSD1306_WHITE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
|
||||||
|
delay(2000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void testfillcircle(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
for(int16_t i=max(display.width(),display.height())/2; i>0; i-=3) {
|
||||||
|
// The INVERSE color is used so circles alternate white/black
|
||||||
|
display.fillCircle(display.width() / 2, display.height() / 2, i, SSD1306_INVERSE);
|
||||||
|
display.display(); // Update screen with each newly-drawn circle
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
|
||||||
|
delay(2000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void testdrawroundrect(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
for(int16_t i=0; i<display.height()/2-2; i+=2) {
|
||||||
|
display.drawRoundRect(i, i, display.width()-2*i, display.height()-2*i,
|
||||||
|
display.height()/4, SSD1306_WHITE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
|
||||||
|
delay(2000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void testfillroundrect(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
for(int16_t i=0; i<display.height()/2-2; i+=2) {
|
||||||
|
// The INVERSE color is used so round-rects alternate white/black
|
||||||
|
display.fillRoundRect(i, i, display.width()-2*i, display.height()-2*i,
|
||||||
|
display.height()/4, SSD1306_INVERSE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
|
||||||
|
delay(2000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void testdrawtriangle(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
for(int16_t i=0; i<max(display.width(),display.height())/2; i+=5) {
|
||||||
|
display.drawTriangle(
|
||||||
|
display.width()/2 , display.height()/2-i,
|
||||||
|
display.width()/2-i, display.height()/2+i,
|
||||||
|
display.width()/2+i, display.height()/2+i, SSD1306_WHITE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
|
||||||
|
delay(2000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void testfilltriangle(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
for(int16_t i=max(display.width(),display.height())/2; i>0; i-=5) {
|
||||||
|
// The INVERSE color is used so triangles alternate white/black
|
||||||
|
display.fillTriangle(
|
||||||
|
display.width()/2 , display.height()/2-i,
|
||||||
|
display.width()/2-i, display.height()/2+i,
|
||||||
|
display.width()/2+i, display.height()/2+i, SSD1306_INVERSE);
|
||||||
|
display.display();
|
||||||
|
delay(1);
|
||||||
|
}
|
||||||
|
|
||||||
|
delay(2000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void testdrawchar(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
display.setTextSize(1); // Normal 1:1 pixel scale
|
||||||
|
display.setTextColor(SSD1306_WHITE); // Draw white text
|
||||||
|
display.setCursor(0, 0); // Start at top-left corner
|
||||||
|
display.cp437(true); // Use full 256 char 'Code Page 437' font
|
||||||
|
|
||||||
|
// Not all the characters will fit on the display. This is normal.
|
||||||
|
// Library will draw what it can and the rest will be clipped.
|
||||||
|
for(int16_t i=0; i<256; i++) {
|
||||||
|
if(i == '\n') display.write(' ');
|
||||||
|
else display.write(i);
|
||||||
|
}
|
||||||
|
|
||||||
|
display.display();
|
||||||
|
delay(2000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void testdrawstyles(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
display.setTextSize(1); // Normal 1:1 pixel scale
|
||||||
|
display.setTextColor(SSD1306_WHITE); // Draw white text
|
||||||
|
display.setCursor(0,0); // Start at top-left corner
|
||||||
|
display.println(F("Hello, world!"));
|
||||||
|
|
||||||
|
display.setTextColor(SSD1306_BLACK, SSD1306_WHITE); // Draw 'inverse' text
|
||||||
|
display.println(3.141592);
|
||||||
|
|
||||||
|
display.setTextSize(2); // Draw 2X-scale text
|
||||||
|
display.setTextColor(SSD1306_WHITE);
|
||||||
|
display.print(F("0x")); display.println(0xDEADBEEF, HEX);
|
||||||
|
|
||||||
|
display.display();
|
||||||
|
delay(2000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void testscrolltext(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
display.setTextSize(2); // Draw 2X-scale text
|
||||||
|
display.setTextColor(SSD1306_WHITE);
|
||||||
|
display.setCursor(10, 0);
|
||||||
|
display.println(F("scroll"));
|
||||||
|
display.display(); // Show initial text
|
||||||
|
delay(100);
|
||||||
|
|
||||||
|
// Scroll in various directions, pausing in-between:
|
||||||
|
display.startscrollright(0x00, 0x0F);
|
||||||
|
delay(2000);
|
||||||
|
display.stopscroll();
|
||||||
|
delay(1000);
|
||||||
|
display.startscrollleft(0x00, 0x0F);
|
||||||
|
delay(2000);
|
||||||
|
display.stopscroll();
|
||||||
|
delay(1000);
|
||||||
|
display.startscrolldiagright(0x00, 0x07);
|
||||||
|
delay(2000);
|
||||||
|
display.startscrolldiagleft(0x00, 0x07);
|
||||||
|
delay(2000);
|
||||||
|
display.stopscroll();
|
||||||
|
delay(1000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void testdrawbitmap(void) {
|
||||||
|
display.clearDisplay();
|
||||||
|
|
||||||
|
display.drawBitmap(
|
||||||
|
(display.width() - LOGO_WIDTH ) / 2,
|
||||||
|
(display.height() - LOGO_HEIGHT) / 2,
|
||||||
|
logo_bmp, LOGO_WIDTH, LOGO_HEIGHT, 1);
|
||||||
|
display.display();
|
||||||
|
delay(1000);
|
||||||
|
}
|
||||||
|
|
||||||
|
#define XPOS 0 // Indexes into the 'icons' array in function below
|
||||||
|
#define YPOS 1
|
||||||
|
#define DELTAY 2
|
||||||
|
|
||||||
|
void testanimate(const uint8_t *bitmap, uint8_t w, uint8_t h) {
|
||||||
|
int8_t f, icons[NUMFLAKES][3];
|
||||||
|
|
||||||
|
// Initialize 'snowflake' positions
|
||||||
|
for(f=0; f< NUMFLAKES; f++) {
|
||||||
|
icons[f][XPOS] = random(1 - LOGO_WIDTH, display.width());
|
||||||
|
icons[f][YPOS] = -LOGO_HEIGHT;
|
||||||
|
icons[f][DELTAY] = random(1, 6);
|
||||||
|
Serial.print(F("x: "));
|
||||||
|
Serial.print(icons[f][XPOS], DEC);
|
||||||
|
Serial.print(F(" y: "));
|
||||||
|
Serial.print(icons[f][YPOS], DEC);
|
||||||
|
Serial.print(F(" dy: "));
|
||||||
|
Serial.println(icons[f][DELTAY], DEC);
|
||||||
|
}
|
||||||
|
|
||||||
|
for(;;) { // Loop forever...
|
||||||
|
display.clearDisplay(); // Clear the display buffer
|
||||||
|
|
||||||
|
// Draw each snowflake:
|
||||||
|
for(f=0; f< NUMFLAKES; f++) {
|
||||||
|
display.drawBitmap(icons[f][XPOS], icons[f][YPOS], bitmap, w, h, SSD1306_WHITE);
|
||||||
|
}
|
||||||
|
|
||||||
|
display.display(); // Show the display buffer on the screen
|
||||||
|
delay(200); // Pause for 1/10 second
|
||||||
|
|
||||||
|
// Then update coordinates of each flake...
|
||||||
|
for(f=0; f< NUMFLAKES; f++) {
|
||||||
|
icons[f][YPOS] += icons[f][DELTAY];
|
||||||
|
// If snowflake is off the bottom of the screen...
|
||||||
|
if (icons[f][YPOS] >= display.height()) {
|
||||||
|
// Reinitialize to a random position, just off the top
|
||||||
|
icons[f][XPOS] = random(1 - LOGO_WIDTH, display.width());
|
||||||
|
icons[f][YPOS] = -LOGO_HEIGHT;
|
||||||
|
icons[f][DELTAY] = random(1, 6);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
name=Adafruit SSD1306
|
name=Adafruit SSD1306
|
||||||
version=2.5.14
|
version=2.5.15
|
||||||
author=Adafruit
|
author=Adafruit
|
||||||
maintainer=Adafruit <info@adafruit.com>
|
maintainer=Adafruit <info@adafruit.com>
|
||||||
sentence=SSD1306 oled driver library for monochrome 128x64 and 128x32 displays
|
sentence=SSD1306 oled driver library for monochrome 128x64 and 128x32 displays
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue