diff --git a/LICENSE b/LICENSE
index 4e961d04..bee399aa 100644
--- a/LICENSE
+++ b/LICENSE
@@ -1,6 +1,6 @@
 MIT License
 
-Copyright (c) 2020 Adafruit Industries
+Copyright (c) 2020-2021 Adafruit Industries
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
diff --git a/README.md b/README.md
index e8fab8d3..3eabdf9f 100644
--- a/README.md
+++ b/README.md
@@ -1,54 +1,24 @@
-# Wippersnapper Arduino
-Arduino Library for Adafruit IO Wippersnapper, the no-code IoT interface on Adafruit.io.
+![Build CI](https://github.com/adafruit/Adafruit_Wippersnapper_Arduino/actions/workflows/githubci.yml/badge.svg)
 
-NOTE: This library in beta and is actively being developed, please report any bugs on the issue page of this repository.
+# Wippersnapper Arduino BETA
+Arduino Library for Adafruit IO Wippersnapper beta, the no-code IoT interface on Adafruit.io.
 
-## Installation
+NOTE: This software is in early beta and is in active development.
 
-Prior to installation, make sure you have your Arduino IDE configured for the board you're using with this library:
+Please report bugs on the [Adafruit IO Support Page](https://io.adafruit.com/support).
 
-Supported SAMD51 Hardware:
-* [Adafruit Metro M4 AirLift Express](https://learn.adafruit.com/adafruit-metro-m4-express-airlift-wifi/setup)
-* [Adafruit PyPortal](https://learn.adafruit.com/adafruit-pyportal/setup)
+## Get Wippersnapper
+Compiled binaries and UF2 files for supported boards are provided on the [releases page](https://github.com/adafruit/Adafruit_Wippersnapper_Arduino/releases) of this repository.
 
-Supported ESP32-S2 Hardware:
-* [Adafruit FunHouse](https://learn.adafruit.com/adafruit-funhouse/arduino-ide-setup)
+## Supported Hardware
+Wippersnapper currently supports the following hardware. Don't see your board? Don't worry - we'll be adding more hardware over time.
 
-Supported ESP32 Hardware:
-* [Adafruit Huzzah32](https://learn.adafruit.com/adafruit-huzzah32-esp32-feather/using-with-arduino-ide)
+ESP32-S2
+* Adafruit FunHouse
 
-Supported ESP8266 Hardware:
-* [Adafruit Huzzah8266](https://learn.adafruit.com/adafruit-feather-huzzah-esp8266/using-arduino-ide)
-
-
-This library requires the following dependencies to be installed from the Arduino Library Manager:
-* [Adafruit MQTT Library](https://github.com/adafruit/Adafruit_MQTT_Library)
-
-
-## Usage
-* Download the [latest .ZIP for this library](https://github.com/adafruit/Adafruit_Wippersnapper_Arduino/archive/master.zip)
-* Within the Arduino IDE, select Sketch -> Include Library -> Add .ZIP Library
-* Select the .ZIP you downloaded
-* Within the Arduino IDE, select File -> Examples -> Adafruit Wippersnapper -> Wippersnapper_demo
-* In `config.h`, set `IO_USERNAME` and `IO_KEY` to your Adafruit IO Staging credentials.
-* In `config.h`, set `WIFI_SSID` and `WIFI_PASS` to your WiFi credentials.
-* If you are using an Adafruit AirLift Co-Processor board - uncomment the `//#define USE_AIRLIFT` line.
-* On a web browser, navigate to the [Adafruit IO staging website](https://io.adafruit.us/)
-* Compile and upload the sketch to your board.
-* Your board should automatically run the Wippersnapper demo sketch and connect to Adafruit IO.
-
-## Hardware Compatibility
-The following boards are currently supported by this library:
-* Adafruit PyPortal
+SAMD51
 * Adafruit Metro M4 AirLift Lite
-* Adafruit Metro M4 Express
-* Adafruit Huzzah ESP8266
-* Adafruit Huzzah ESP32
-* Adafruit FunHouse ESP32-S2
+* Adafruit PyPortal
 
 ## Adding Hardware to this library
-TODO!
-
-[Hardware Specification for adding boards to WipperSnapper](https://github.com/adafruit/WipperSnapper_Boards)
-
-Communication between this library and the MQTT broker uses protocol buffers for serialized data. The raw protocol buffers used by this project are located [here](https://github.com/adafruit/WipperSnapper_ProtoBuf). This library contains compiled `.pb.h` and `.pb.c` protocol buffer messages generated by [nanopb](https://github.com/nanopb/nanopb).
+We're still working this out and will add instructions for adding your own hardware to Wippersnapper at a later date!
\ No newline at end of file