<h2>microBuilder.eu Eagle Footprint Library</h2> Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at www.microBuilder.eu. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits! <h3>Obligatory Warning</h3> While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly! <h3>License</h3> This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions: THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Source: http://www.bourns.com/data/global/PDFs/TC33.PDF >NAME >VALUE >NAME >VALUE 3 1 3 0603-Mini Mini footprint for dense boards >NAME >VALUE >NAME >VALUE >NAME >VALUE RESISTOR 2512 (Metric 6432) >NAME >VALUE 0402 >NAME >VALUE 0402 MicroPitch >NAME >VALUE 0603 >NAME >VALUE 0603 MicroPitch >NAME >VALUE 0805 >NAME >VALUE 0805 MicroPitch >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE SOT23 - Reflow soldering >NAME >VALUE >NAME >VALUE SMALL OUTLINE TRANSISTOR TS-003 >NAME >VALUE SOT23 - Wave soldering >NAME >VALUE POWER-PAK 1212-8 >NAME >VALUE SMD D-PAK 1 2 3 4 >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE Bourns 3303W 3MM SMT Trimpot >NAME >VALUE >NAME >VALUE >NAME >VALUE 0402 >NAME >VALUE 0603 MicroPitch >NAME >VALUE >NAME >VALUE SC70-3 Reflow soldering Philips SC01_Mounting_1996.pdf ROHM : UMT3 ; EIAJ : SC-70 >NAME >VALUE 1mm FIDUCIAL MARKER round, layers 1 + 16 + 21 + 39 + 49 >NAME >VALUE SPEAKER >NAME >VALUE SPEAKER >NAME >VALUE >NAME >VALUE >VALUE >NAME >NAME >VALUE >VALUE Frame doc - Courtesy Robert Starr (bobstarr.net) >SHEET REV TITLE DRG o >DRAWING_NAME N DATE >LAST_DATE_TIME >YEAR C ISSUE DRAWN CHECKED DATE >COMPANY FILE: PAGE: >DRAWN >CHECKED >DATE >DRGNO >REV >VALUE >NAME >VALUE >VALUE >NAME D S G >NAME >VALUE D S G >NAME >VALUE >NAME >VALUE >NAME >VALUE FRAME DIN A4, landscape with location and doc. field 3-Pin SMT Trimpots Bourns TC33 (X-2) Series <ul> <li> 1K - Digikey: TC33X-102ECT-ND</li> <li> 10K - Digikey: TC33X-2-103E</li> <li> 100K - Digikey: TC33X-104ECT-ND</li> </ul> Bourns 3303 (W) Series <ul> <li> 3mm 10K Single Turn - Digikey: 3303W-103ETR-ND</li> <li> 3mm 100K Single Turn - Digikey: 3303X-104ETR-ND</li> </ul> 3.3V Supply VBAT Supply Sumbol Resistors For new designs, use the packages preceded by an '_' character since they are more reliable: The following footprints should be used on most boards: <ul> <li>_0402 - Standard footprint for regular board layouts</li> <li>_0603 - Standard footprint for regular board layouts</li> <li>_0805 - Standard footprint for regular board layouts</li> <li>_1206 - Standard footprint for regular board layouts</li> </ul> For extremely tight-pitch boards where space is at a premium, the following 'micro-pitch' footprints can be used (smaller pads, no silkscreen outline, etc.): <ul> <li>_0402MP - Micro-pitch footprint for very dense/compact boards</li> <li>_0603MP - Micro-pitch footprint for very dense/compact boards</li> <li>_0805MP - Micro-pitch footprint for very dense/compact boards</li> <li>_1206MP - Micro-pitch footprint for very dense/compact boards</li> </ul> P-Channel Mosfet LEGEND VDS: Voltage Drain-Source ID: Drain Current RDS(ON): Drain-Source On-State Resistance VGS(TH): Gate-Source Threshold Voltage CISS: Drain-Source Input Capacitance SOT-23 <table border="0" width="90%" cellspacing="0" cellpadding="5"> <tr bgcolor="#DDDDDD"> <td>Name</td> <td>VDS</td> <td>ID</td> <td>RDS(ON)</td> <td>VGS(TH)</td> <td>CISS</td> <td>Order Number</td> </tr> <tr> <td>IRLML5103</td> <td>30V</td> <td>760mA</td> <td>600 mOhm</td> <td>--</td> <td>75pF @ 25V</td> <td>Digikey: IRLML5103PBFCT-ND</td> </tr> <tr> <td>IRLML6401</td> <td>12V</td> <td>4.3A</td> <td>50 mOhm</td> <td>950mV @ 250µA</td> <td>830pF @ 10V</td> <td>Digikey: IRLML6401PBFTR-ND</td> </tr> <tr> <td>NTR0202PL</td> <td>20V</td> <td>400mA</td> <td>800 mOhm</td> <td>2.3V @ 250uA</td> <td>70pF @ 5V</td> <td>Digikey: NTR0202PLT1GOSTR-ND</td> </tr> <tr> <td>NTR4101PT1G</td> <td>20V</td> <td>1.8A</td> <td>85 mOhm</td> <td>1.2V @ 250uA</td> <td>675pF @ 10V</td> <td>Digikey: NTR4101PT1GOSCT-ND</td> </tr> <tr> <td>DMP2004K</td> <td>20V</td> <td>600mA</td> <td>900 mOhm</td> <td>1V @ 250uA</td> <td>175pF @ 16V</td> <td>Digikey: DMP2004KDICT-ND</td> </tr> <tr> <td>PMV65XP</td> <td>20V</td> <td>3.9A</td> <td>76 mOhm</td> <td>950mV @ 1mA</td> <td>725pF @ 20V</td> <td>Digikey: 568-2358-2-ND</td> </tr> <tr> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> </tr> <tr> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> </tr> </table> TO-252 <table border="0" width="90%" cellspacing="0" cellpadding="5"> <tr bgcolor="#DDDDDD"> <td>Name</td> <td>VDS</td> <td>ID</td> <td>RDS(ON)</td> <td>VGS(TH)</td> <td>CISS</td> <td>Order Number</td> </tr> <tr> <td>AOD417</td> <td>30V</td> <td>25A</td> <td>34 mOhm</td> <td>3V @ 250µA</td> <td>920pF @ 15V</td> <td>Digikey: 785-1106-2-ND</td> </tr> </table> PowerPak <table border="0" width="90%" cellspacing="0" cellpadding="5"> <tr bgcolor="#DDDDDD"> <td>Name</td> <td>VDS</td> <td>ID</td> <td>RDS(ON)</td> <td>VGS(TH)</td> <td>CISS</td> <td>Order Number</td> </tr> <tr> <td>AON7401</td> <td>30V</td> <td>12A</td> <td>14 mOhm</td> <td>3V @ 250µA</td> <td>2600pF @ 15V</td> <td>Digikey: 785-1302-1-ND</td> </tr> N-Channel Mosfet LEGEND VDS: Voltage Drain-Source ID: Drain Current RDS(ON): Drain-Source On-State Resistance VGS(TH): Gate-Source Threshold Voltage CISS: Drain-Source Input Capacitance SOT-23 <table border="0" width="90%" cellspacing="0" cellpadding="5"> <tr bgcolor="#DDDDDD"> <td>Name</td> <td>VDS</td> <td>ID</td> <td>RDS(ON)</td> <td>VGS(TH)</td> <td>CISS</td> <td>Order Number</td> </tr> <tr> <td>2N7002E</td> <td>60V</td> <td>260mA</td> <td>2.5 Ohm</td> <td>2.5V @ 250uA</td> <td>26.7pF @ 25V</td> <td>2N7002ET1GOSTR-ND</td> </tr> <tr> <td>BSH103</td> <td>30V</td> <td>850mA</td> <td>400 mOhm</td> <td>400mV @ 1mA</td> <td>83pF @ 24V</td> <td>BSH103,235-ND</td> </tr> <tr> <td>BSS138</td> <td>60V</td> <td>320mA</td> <td>1.6 Ohm</td> <td>1.5V @ 250uA</td> <td>50pF @ 10V</td> <td>Mouser: 771-BSS138PW115</td> </tr> <tr> <td>DMN2075U-7</td> <td>20V</td> <td>4.2A</td> <td>38 mOhm</td> <td>1V @ 250 uA</td> <td>594.3pF @ 10V</td> <td>DMN2075U-7DICT-ND</td> </tr> <tr> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> </tr> </table> * BSS138 good choice for I2C level-shifting POWERPAK 1212-8 <table border="0" width="90%" cellspacing="0" cellpadding="5"> <tr bgcolor="#DDDDDD"> <td>Name</td> <td>VDS</td> <td>ID</td> <td>RDS(ON)</td> <td>VGS(TH)</td> <td>CISS</td> <td>Order Number</td> </tr> <tr> <td>Si7308DN</td> <td>60V</td> <td>6A</td> <td>58 mOhm</td> <td>3V @ 250uA</td> <td>665pF @ 15V</td> <td>SI7308DN-T1-E3CT-ND</td> </tr> </table> Fiducial Alignment Points Various fiducial points for machine vision alignment. Ceramic Capacitors For new designs, use the packages preceded by an '_' character since they are more reliable: The following footprints should be used on most boards: <ul> <li>_0402 - Standard footprint for regular board layouts</li> <li>_0603 - Standard footprint for regular board layouts</li> <li>_0805 - Standard footprint for regular board layouts</li> <li>_1206 - Standard footprint for regular board layouts</li> </ul> For extremely tight-pitch boards where space is at a premium, the following 'micro-pitch' footprints can be used (smaller pads, no silkscreen outline, etc.): <ul> <li>_0402MP - Micro-pitch footprint for very dense/compact boards</li> <li>_0603MP - Micro-pitch footprint for very dense/compact boards</li> <li>_0805MP - Micro-pitch footprint for very dense/compact boards</li> <li>_1206MP - Micro-pitch footprint for very dense/compact boards</li> </ul> SPEAKER Source: BuerklinAdded PS12 (for part # PS1240 piezo) http://www.ladyada.net/library/pcb/eaglelibrary.html >VALUE SUPPLY SYMBOL Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL USB Raspberry Pi Picowbell USB Raspberry Pi Picowbell USB Raspberry Pi Picowbell >NAME >VALUE RP2040 Courtesy: Adafruit Industries >NAME >VALUE flip flop type microsd holder https://www.molex.com/pdm_docs/sd/472192001_sd.pdf Courtesy: Adafruit Industries >NAME >VALUE >NAME >VALUE 4UConnector: 10017 PCB EDGE >NAME >VALUE >NAME >VALUE PCB Edge PCB EDGE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE Source: http://media.digikey.com/pdf/Data%20Sheets/C&K/KMT_0xx_NGJ_LHS_Drawing.pdf >NAME >VALUE >NAME >VALUE >NAME >VALUE 1 2 3 4 >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE 3,0 1,0 2,0 C&K >NAME >VALUE >NAME >VALUE >NAME >VALUE 4 Pin JST PH Series Female Connector Righ-Angle SMT >Name >Value >NAME JST SH 4 >NAME JST SH 4 >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE SD & MMC >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME MicroSD/Transflash Card Holder with SPI pinout 3M: 2908-05WB-MG 4UConnector: 19656 Footprint courtesy: Adafruit Industries USB - Type A Connectors Male types stick out and are inserted into a PC or matching females parts (these are the connectors used on USB Memory Sticks, etc.). Female parts are generally used for USB Host and accept a male-type connector. <ul> <li>SMT - 4UCON: 10017</li> <li>PTHFML - Digikey: 609-1045-ND, 4UCon: 05241</li> <li>PCB - Use 2.0mm thick PCBs with this footprint</li> </ul> SMT Tact Switches <ul> <li>6x6mm - Digikey: P12940SCT-ND</li> <li>KMR2 (4.6x2.8mm) - Digikey: 401-1426-1-ND</li> <li>EVQ-PQHB55 - Light Touch, 160GF (4.5x4.5mm) - Digikey: P8090SCT-ND</li> <li>KMT0 - KMT021 NGJ LHS (etc.) IP68/Waterproof - Digikey: CKN10289CT-ND</li> </ul> Mounting Hole For #2 screws (0.086"/2.18mm width, 0.094"/2.4mm hole) use 2.5mm Switch - DPDT A DPDT Switch acts like an SPDT switch, but has a pair of switches instead of just one. <ul> <li>Vertical - 0.3A @ 6V SMT - Digikey: JS202011SCQN</li> </ul> PIN HEADER >VALUE >NAME WS2811 >NAME >NAME 1.9" TFT (170x320) >NAME 1.9" TFT (170x320) >NAME >VALUE switchable measure voltage Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version.