bumped version for release

Fix warnings and chip detection

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,46 @@
+Thank you for opening an issue on an Adafruit Arduino library repository.  To
+improve the speed of resolution please review the following guidelines and
+common troubleshooting steps below before creating the issue:
+
+- **Do not use GitHub issues for troubleshooting projects and issues.**  Instead use
+  the forums at http://forums.adafruit.com to ask questions and troubleshoot why
+  something isn't working as expected.  In many cases the problem is a common issue
+  that you will more quickly receive help from the forum community.  GitHub issues
+  are meant for known defects in the code.  If you don't know if there is a defect
+  in the code then start with troubleshooting on the forum first.
+
+- **If following a tutorial or guide be sure you didn't miss a step.** Carefully
+  check all of the steps and commands to run have been followed.  Consult the
+  forum if you're unsure or have questions about steps in a guide/tutorial.
+
+- **For Arduino projects check these very common issues to ensure they don't apply**:
+
+  - For uploading sketches or communicating with the board make sure you're using
+    a **USB data cable** and **not** a **USB charge-only cable**.  It is sometimes
+    very hard to tell the difference between a data and charge cable!  Try using the
+    cable with other devices or swapping to another cable to confirm it is not
+    the problem.
+
+  - **Be sure you are supplying adequate power to the board.**  Check the specs of
+    your board and plug in an external power supply.  In many cases just
+    plugging a board into your computer is not enough to power it and other
+    peripherals.
+
+  - **Double check all soldering joints and connections.**  Flakey connections
+    cause many mysterious problems.  See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints.
+
+  - **Ensure you are using an official Arduino or Adafruit board.** We can't
+    guarantee a clone board will have the same functionality and work as expected
+    with this code and don't support them.
+
+If you're sure this issue is a defect in the code and checked the steps above
+please fill in the following fields to provide enough troubleshooting information.
+You may delete the guideline and text above to just leave the following details:
+
+- Arduino board:  **INSERT ARDUINO BOARD NAME/TYPE HERE**
+
+- Arduino IDE version (found in Arduino -> About Arduino menu):  **INSERT ARDUINO
+  VERSION HERE**
+
+- List the steps to reproduce the problem below (if possible attach a sketch or
+  copy the sketch code in too): **LIST REPRO STEPS BELOW**

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,26 @@
+Thank you for creating a pull request to contribute to Adafruit's GitHub code!
+Before you open the request please review the following guidelines and tips to
+help it be more easily integrated:
+
+- **Describe the scope of your change--i.e. what the change does and what parts
+  of the code were modified.**  This will help us understand any risks of integrating
+  the code.
+
+- **Describe any known limitations with your change.**  For example if the change
+  doesn't apply to a supported platform of the library please mention it.
+
+- **Please run any tests or examples that can exercise your modified code.**  We
+  strive to not break users of the code and running tests/examples helps with this
+  process.
+
+Thank you again for contributing!  We will try to test and integrate the change
+as soon as we can, but be aware we have many GitHub repositories to manage and
+can't immediately respond to every request.  There is no need to bump or check in
+on a pull request (it will clutter the discussion of the request).
+
+Also don't be worried if the request is closed or not integrated--sometimes the
+priorities of Adafruit's GitHub code (education, ease of use) might not match the
+priorities of the pull request.  Don't fret, the open source community thrives on
+forks and GitHub makes it easy to keep your changes in a forked repo.
+
+After reviewing the guidelines above you can delete this text from the pull request.

Adafruit_TFTLCD.h

@@ -11,39 +11,39 @@
 #else
 #include "WProgram.h"
 #endif
+
 #include <Adafruit_GFX.h>
 
 // **** IF USING THE LCD BREAKOUT BOARD, COMMENT OUT THIS NEXT LINE. ****
 // **** IF USING THE LCD SHIELD, LEAVE THE LINE ENABLED:             ****
-#define USE_ADAFRUIT_SHIELD_PINOUT
+
+//#define USE_ADAFRUIT_SHIELD_PINOUT 1
 
 class Adafruit_TFTLCD : public Adafruit_GFX {
 
 public:
-
   Adafruit_TFTLCD(uint8_t cs, uint8_t cd, uint8_t wr, uint8_t rd, uint8_t rst);
   Adafruit_TFTLCD(void);
 
-  void     begin(uint16_t id = 0x9325),
-           drawPixel(int16_t x, int16_t y, uint16_t color),
-           drawFastHLine(int16_t x0, int16_t y0, int16_t w, uint16_t color),
-           drawFastVLine(int16_t x0, int16_t y0, int16_t h, uint16_t color),
-           fillRect(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t c),
-           fillScreen(uint16_t color),
-           reset(void),
-           setRegisters8(uint8_t *ptr, uint8_t n),
-           setRegisters16(uint16_t *ptr, uint8_t n),
-           setRotation(uint8_t x),
+  void begin(uint16_t id = 0x9325);
+  void drawPixel(int16_t x, int16_t y, uint16_t color);
+  void drawFastHLine(int16_t x0, int16_t y0, int16_t w, uint16_t color);
+  void drawFastVLine(int16_t x0, int16_t y0, int16_t h, uint16_t color);
+  void fillRect(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t c);
+  void fillScreen(uint16_t color);
+  void reset(void);
+  void setRegisters8(uint8_t *ptr, uint8_t n);
+  void setRegisters16(uint16_t *ptr, uint8_t n);
+  void setRotation(uint8_t x);
   // These methods are public in order for BMP examples to work:
-           setAddrWindow(int x1, int y1, int x2, int y2),
-           pushColors(uint16_t *data, uint8_t len, boolean first);
+  void setAddrWindow(int x1, int y1, int x2, int y2);
+  void pushColors(uint16_t *data, uint8_t len, boolean first);
 
   uint16_t color565(uint8_t r, uint8_t g, uint8_t b),
-           readPixel(int16_t x, int16_t y),
-           readID(void);
+      readPixel(int16_t x, int16_t y), readID(void);
+  uint32_t readReg(uint8_t r);
 
 private:
-
   void init(),
   // These items may have previously been defined as macros
   // in pin_magic.h.  If not, function versions are declared:
@@ -62,21 +62,32 @@ class Adafruit_TFTLCD : public Adafruit_GFX {
 #ifndef writeRegister16
       writeRegister16(uint16_t a, uint16_t d),
 #endif
+      writeRegister24(uint8_t a, uint32_t d),
+      writeRegister32(uint8_t a, uint32_t d),
 #ifndef writeRegisterPair
       writeRegisterPair(uint8_t aH, uint8_t aL, uint16_t d),
 #endif
-           setLR(void),
-           flood(uint16_t color, uint32_t len);
+      setLR(void), flood(uint16_t color, uint32_t len);
   uint8_t driver;
+
 #ifndef read8
   uint8_t read8fn(void);
 #define read8isFunctionalized
 #endif
+
 #ifndef USE_ADAFRUIT_SHIELD_PINOUT
+
+#ifdef __AVR__
   volatile uint8_t *csPort, *cdPort, *wrPort, *rdPort;
-  uint8_t           csPinSet  ,  cdPinSet  ,  wrPinSet  ,  rdPinSet  ,
-                    csPinUnset,  cdPinUnset,  wrPinUnset,  rdPinUnset,
-                   _reset;
+  uint8_t csPinSet, cdPinSet, wrPinSet, rdPinSet, csPinUnset, cdPinUnset,
+      wrPinUnset, rdPinUnset, _reset;
+#endif
+#if defined(__SAM3X8E__)
+  Pio *csPort, *cdPort, *wrPort, *rdPort;
+  uint32_t csPinSet, cdPinSet, wrPinSet, rdPinSet, csPinUnset, cdPinUnset,
+      wrPinUnset, rdPinUnset, _reset;
+#endif
+
 #endif
 };
 

README.md

@@ -0,0 +1,19 @@
+# Adafruit library for 8-bit TFT LCDs such as ILI9325, ILI9328, etc
+
+This is a library for our Adafruit 16-channel PWM & Servo driver, shield or FeatherWing
+
+<a href="https://www.adafruit.com/products/335"><img src="assets/image.jpg" height="300"/></a>
+
+Pick one up today in the adafruit shop!
+  * https://www.adafruit.com/product/335
+  * https://www.adafruit.com/product/376
+
+These displays use 8-bit parallel to communicate, 12 or 13 pins are required to interface (RST is optional).
+
+Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!
+
+Written by Limor Fried/Ladyada for Adafruit Industries. BSD license, check license.txt for more information. 
+
+All text above must be included in any redistribution
+
+To install, use the Arduino Library Manager and search for "Adafruit 2.8" TFT display Library" and install the library.

README.txt

@@ -1,21 +0,0 @@
-This is a library for the Adafruit 2.8" TFT display.
-This library works with the Adafruit 2.8" TFT Breakout w/SD card
-  ----> http://www.adafruit.com/products/335
-as well as Adafruit TFT Touch Shield
-  ----> http://www.adafruit.com/products/376
- 
-Check out the links above for our tutorials and wiring diagrams.
-These displays use 8-bit parallel to communicate, 12 or 13 pins are required
-to interface (RST is optional).
-Adafruit invests time and resources providing this open source code,
-please support Adafruit and open-source hardware by purchasing
-products from Adafruit!
-
-Written by Limor Fried/Ladyada for Adafruit Industries.
-MIT license, all text above must be included in any redistribution
-
-To download. click the DOWNLOADS button in the top right corner, rename the uncompressed folder Adafruit_TFTLCD. Check that the Adafruit_TFTLCD folder contains Adafruit_TFTLCD.cpp and Adafruit_TFTLCD.
-
-Place the Adafruit_TFT library folder your <arduinosketchfolder>/libraries/ folder. You may need to create the libraries subfolder if its your first library. Restart the IDE
-
-Also requires the Adafruit_GFX library for Arduino. https://github.com/adafruit/Adafruit-GFX-Library

examples/graphicstest/graphicstest.ino

@@ -53,6 +53,8 @@ void setup(void) {
   Serial.println(F("Using Adafruit 2.8\" TFT Breakout Board Pinout"));
 #endif
 
+  Serial.print("TFT size is "); Serial.print(tft.width()); Serial.print("x"); Serial.println(tft.height());
+
   tft.reset();
 
   uint16_t identifier = tft.readID();
@@ -63,6 +65,10 @@ void setup(void) {
     Serial.println(F("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
     Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else if(identifier == 0x8357) {
+    Serial.println(F("Found HX8357D LCD driver"));
   } else {
     Serial.print(F("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);
@@ -377,4 +383,3 @@ unsigned long testFilledRoundRects() {
 
   return micros() - start;
 }
-

examples/rotationtest/rotationtest.ino

@@ -63,6 +63,10 @@ void setup(void) {
     Serial.println(F("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
     Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else if(identifier == 0x8357) {
+    Serial.println(F("Found HX8357D LCD driver"));
   } else {
     Serial.print(F("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);

examples/tftbmp/tftbmp.ino

@@ -1,11 +1,12 @@
 // BMP-loading example specifically for the TFTLCD breakout board.
 // If using the Arduino shield, use the tftbmp_shield.pde sketch instead!
-// If using an Arduino Mega, make sure the SD library is configured for
-// 'soft' SPI in the file Sd2Card.h.
+// If using an Arduino Mega make sure to use its hardware SPI pins, OR make
+// sure the SD library is configured for 'soft' SPI in the file Sd2Card.h.
 
 #include <Adafruit_GFX.h>    // Core graphics library
 #include <Adafruit_TFTLCD.h> // Hardware-specific library
 #include <SD.h>
+#include <SPI.h>
 
 // The control pins for the LCD can be assigned to any digital or
 // analog pins...but we'll use the analog pins as this allows us to
@@ -53,6 +54,10 @@ void setup()
     Serial.println(F("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
     Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else if(identifier == 0x8357) {
+    Serial.println(F("Found HX8357D LCD driver"));
   } else {
     Serial.print(F("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);

examples/tftbmp_shield/tftbmp_shield.ino

@@ -1,7 +1,8 @@
 // BMP-loading example specifically for the TFTLCD Arduino shield.
 // If using the breakout board, use the tftbmp.pde sketch instead!
-// If using an Arduino Mega, make sure the SD library is configured for
-// 'soft' SPI in the file Sd2Card.h.
+// If using an Arduino Mega and your sheild does not use the ICSP header for 
+// SPI, make sure the SD library is configured for 'soft' SPI in the file Sd2Card.h.
+// If in doubt, update the library to use 'soft' SPI.
 
 #include <Adafruit_GFX.h>    // Core graphics library
 #include <Adafruit_TFTLCD.h> // Hardware-specific library
@@ -29,6 +30,8 @@ void setup()
     Serial.println(F("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
     Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
   } else {
     Serial.print(F("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);

examples/tftpaint/tftpaint.ino

@@ -6,6 +6,11 @@
 #include <Adafruit_TFTLCD.h> // Hardware-specific library
 #include <TouchScreen.h>
 
+#if defined(__SAM3X8E__)
+    #undef __FlashStringHelper::F(string_literal)
+    #define F(string_literal) string_literal
+#endif
+
 // When using the BREAKOUT BOARD only, use these 8 data lines to the LCD:
 // For the Arduino Uno, Duemilanove, Diecimila, etc.:
 //   D0 connects to digital pin 8  (Notice these are
@@ -16,8 +21,28 @@
 //   D5 connects to digital pin 5
 //   D6 connects to digital pin 6
 //   D7 connects to digital pin 7
+
 // For the Arduino Mega, use digital pins 22 through 29
 // (on the 2-row header at the end of the board).
+//   D0 connects to digital pin 22
+//   D1 connects to digital pin 23
+//   D2 connects to digital pin 24
+//   D3 connects to digital pin 25
+//   D4 connects to digital pin 26
+//   D5 connects to digital pin 27
+//   D6 connects to digital pin 28
+//   D7 connects to digital pin 29
+
+// For the Arduino Due, use digital pins 33 through 40
+// (on the 2-row header at the end of the board).
+//   D0 connects to digital pin 33
+//   D1 connects to digital pin 34
+//   D2 connects to digital pin 35
+//   D3 connects to digital pin 36
+//   D4 connects to digital pin 37
+//   D5 connects to digital pin 38
+//   D6 connects to digital pin 39
+//   D7 connects to digital pin 40
 
 #define YP A3  // must be an analog pin, use "An" notation!
 #define XM A2  // must be an analog pin, use "An" notation!
@@ -72,9 +97,19 @@ void setup(void) {
     Serial.println(F("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
     Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else if(identifier == 0x8357) {
+    Serial.println(F("Found HX8357D LCD driver"));
   } else {
     Serial.print(F("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);
+    Serial.println(F("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
+    Serial.println(F("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
+    Serial.println(F("should appear in the library header (Adafruit_TFT.h)."));
+    Serial.println(F("If using the breakout board, it should NOT be #defined!"));
+    Serial.println(F("Also if using the breakout, double-check that all wiring"));
+    Serial.println(F("matches the tutorial."));
     return;
   }
 
@@ -102,7 +137,7 @@ void setup(void) {
 void loop()
 {
   digitalWrite(13, HIGH);
-  Point p = ts.getPoint();
+  TSPoint p = ts.getPoint();
   digitalWrite(13, LOW);
 
   // if sharing pins, you'll need to fix the directions of the touchscreen pins

examples/tftpaint_shield/glcdfont.c

@@ -0,0 +1,264 @@
+
+#ifndef FONT5X7_H
+#define FONT5X7_H
+
+// standard ascii 5x7 font
+
+static unsigned char  font[]  = {
+        0x00, 0x00, 0x00, 0x00, 0x00,   
+	0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 	
+	0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 	
+	0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 
+	0x18, 0x3C, 0x7E, 0x3C, 0x18, 
+	0x1C, 0x57, 0x7D, 0x57, 0x1C, 
+	0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 
+	0x00, 0x18, 0x3C, 0x18, 0x00, 
+	0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 
+	0x00, 0x18, 0x24, 0x18, 0x00, 
+	0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 
+	0x30, 0x48, 0x3A, 0x06, 0x0E, 
+	0x26, 0x29, 0x79, 0x29, 0x26, 
+	0x40, 0x7F, 0x05, 0x05, 0x07, 
+	0x40, 0x7F, 0x05, 0x25, 0x3F, 
+	0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 
+	0x7F, 0x3E, 0x1C, 0x1C, 0x08, 
+	0x08, 0x1C, 0x1C, 0x3E, 0x7F, 
+	0x14, 0x22, 0x7F, 0x22, 0x14, 
+	0x5F, 0x5F, 0x00, 0x5F, 0x5F, 
+	0x06, 0x09, 0x7F, 0x01, 0x7F, 
+	0x00, 0x66, 0x89, 0x95, 0x6A, 
+	0x60, 0x60, 0x60, 0x60, 0x60, 
+	0x94, 0xA2, 0xFF, 0xA2, 0x94, 
+	0x08, 0x04, 0x7E, 0x04, 0x08, 
+	0x10, 0x20, 0x7E, 0x20, 0x10, 
+	0x08, 0x08, 0x2A, 0x1C, 0x08, 
+	0x08, 0x1C, 0x2A, 0x08, 0x08, 
+	0x1E, 0x10, 0x10, 0x10, 0x10, 
+	0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 
+	0x30, 0x38, 0x3E, 0x38, 0x30, 
+	0x06, 0x0E, 0x3E, 0x0E, 0x06, 
+	0x00, 0x00, 0x00, 0x00, 0x00, 
+	0x00, 0x00, 0x5F, 0x00, 0x00, 
+	0x00, 0x07, 0x00, 0x07, 0x00, 
+	0x14, 0x7F, 0x14, 0x7F, 0x14, 
+	0x24, 0x2A, 0x7F, 0x2A, 0x12, 
+	0x23, 0x13, 0x08, 0x64, 0x62, 
+	0x36, 0x49, 0x56, 0x20, 0x50, 
+	0x00, 0x08, 0x07, 0x03, 0x00, 
+	0x00, 0x1C, 0x22, 0x41, 0x00, 
+	0x00, 0x41, 0x22, 0x1C, 0x00, 
+	0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 
+	0x08, 0x08, 0x3E, 0x08, 0x08, 
+	0x00, 0x80, 0x70, 0x30, 0x00, 
+	0x08, 0x08, 0x08, 0x08, 0x08, 
+	0x00, 0x00, 0x60, 0x60, 0x00, 
+	0x20, 0x10, 0x08, 0x04, 0x02, 
+	0x3E, 0x51, 0x49, 0x45, 0x3E, 
+	0x00, 0x42, 0x7F, 0x40, 0x00, 
+	0x72, 0x49, 0x49, 0x49, 0x46, 
+	0x21, 0x41, 0x49, 0x4D, 0x33, 
+	0x18, 0x14, 0x12, 0x7F, 0x10, 
+	0x27, 0x45, 0x45, 0x45, 0x39, 
+	0x3C, 0x4A, 0x49, 0x49, 0x31, 
+	0x41, 0x21, 0x11, 0x09, 0x07, 
+	0x36, 0x49, 0x49, 0x49, 0x36, 
+	0x46, 0x49, 0x49, 0x29, 0x1E, 
+	0x00, 0x00, 0x14, 0x00, 0x00, 
+	0x00, 0x40, 0x34, 0x00, 0x00, 
+	0x00, 0x08, 0x14, 0x22, 0x41, 
+	0x14, 0x14, 0x14, 0x14, 0x14, 
+	0x00, 0x41, 0x22, 0x14, 0x08, 
+	0x02, 0x01, 0x59, 0x09, 0x06, 
+	0x3E, 0x41, 0x5D, 0x59, 0x4E, 
+	0x7C, 0x12, 0x11, 0x12, 0x7C, 
+	0x7F, 0x49, 0x49, 0x49, 0x36, 
+	0x3E, 0x41, 0x41, 0x41, 0x22, 
+	0x7F, 0x41, 0x41, 0x41, 0x3E, 
+	0x7F, 0x49, 0x49, 0x49, 0x41, 
+	0x7F, 0x09, 0x09, 0x09, 0x01, 
+	0x3E, 0x41, 0x41, 0x51, 0x73, 
+	0x7F, 0x08, 0x08, 0x08, 0x7F, 
+	0x00, 0x41, 0x7F, 0x41, 0x00, 
+	0x20, 0x40, 0x41, 0x3F, 0x01, 
+	0x7F, 0x08, 0x14, 0x22, 0x41, 
+	0x7F, 0x40, 0x40, 0x40, 0x40, 
+	0x7F, 0x02, 0x1C, 0x02, 0x7F, 
+	0x7F, 0x04, 0x08, 0x10, 0x7F, 
+	0x3E, 0x41, 0x41, 0x41, 0x3E, 
+	0x7F, 0x09, 0x09, 0x09, 0x06, 
+	0x3E, 0x41, 0x51, 0x21, 0x5E, 
+	0x7F, 0x09, 0x19, 0x29, 0x46, 
+	0x26, 0x49, 0x49, 0x49, 0x32, 
+	0x03, 0x01, 0x7F, 0x01, 0x03, 
+	0x3F, 0x40, 0x40, 0x40, 0x3F, 
+	0x1F, 0x20, 0x40, 0x20, 0x1F, 
+	0x3F, 0x40, 0x38, 0x40, 0x3F, 
+	0x63, 0x14, 0x08, 0x14, 0x63, 
+	0x03, 0x04, 0x78, 0x04, 0x03, 
+	0x61, 0x59, 0x49, 0x4D, 0x43, 
+	0x00, 0x7F, 0x41, 0x41, 0x41, 
+	0x02, 0x04, 0x08, 0x10, 0x20, 
+	0x00, 0x41, 0x41, 0x41, 0x7F, 
+	0x04, 0x02, 0x01, 0x02, 0x04, 
+	0x40, 0x40, 0x40, 0x40, 0x40, 
+	0x00, 0x03, 0x07, 0x08, 0x00, 
+	0x20, 0x54, 0x54, 0x78, 0x40, 
+	0x7F, 0x28, 0x44, 0x44, 0x38, 
+	0x38, 0x44, 0x44, 0x44, 0x28, 
+	0x38, 0x44, 0x44, 0x28, 0x7F, 
+	0x38, 0x54, 0x54, 0x54, 0x18, 
+	0x00, 0x08, 0x7E, 0x09, 0x02, 
+	0x18, 0xA4, 0xA4, 0x9C, 0x78, 
+	0x7F, 0x08, 0x04, 0x04, 0x78, 
+	0x00, 0x44, 0x7D, 0x40, 0x00, 
+	0x20, 0x40, 0x40, 0x3D, 0x00, 
+	0x7F, 0x10, 0x28, 0x44, 0x00, 
+	0x00, 0x41, 0x7F, 0x40, 0x00, 
+	0x7C, 0x04, 0x78, 0x04, 0x78, 
+	0x7C, 0x08, 0x04, 0x04, 0x78, 
+	0x38, 0x44, 0x44, 0x44, 0x38, 
+	0xFC, 0x18, 0x24, 0x24, 0x18, 
+	0x18, 0x24, 0x24, 0x18, 0xFC, 
+	0x7C, 0x08, 0x04, 0x04, 0x08, 
+	0x48, 0x54, 0x54, 0x54, 0x24, 
+	0x04, 0x04, 0x3F, 0x44, 0x24, 
+	0x3C, 0x40, 0x40, 0x20, 0x7C, 
+	0x1C, 0x20, 0x40, 0x20, 0x1C, 
+	0x3C, 0x40, 0x30, 0x40, 0x3C, 
+	0x44, 0x28, 0x10, 0x28, 0x44, 
+	0x4C, 0x90, 0x90, 0x90, 0x7C, 
+	0x44, 0x64, 0x54, 0x4C, 0x44, 
+	0x00, 0x08, 0x36, 0x41, 0x00, 
+	0x00, 0x00, 0x77, 0x00, 0x00, 
+	0x00, 0x41, 0x36, 0x08, 0x00, 
+	0x02, 0x01, 0x02, 0x04, 0x02, 
+	0x3C, 0x26, 0x23, 0x26, 0x3C, 
+	0x1E, 0xA1, 0xA1, 0x61, 0x12, 
+	0x3A, 0x40, 0x40, 0x20, 0x7A, 
+	0x38, 0x54, 0x54, 0x55, 0x59, 
+	0x21, 0x55, 0x55, 0x79, 0x41, 
+	0x21, 0x54, 0x54, 0x78, 0x41, 
+	0x21, 0x55, 0x54, 0x78, 0x40, 
+	0x20, 0x54, 0x55, 0x79, 0x40, 
+	0x0C, 0x1E, 0x52, 0x72, 0x12, 
+	0x39, 0x55, 0x55, 0x55, 0x59, 
+	0x39, 0x54, 0x54, 0x54, 0x59, 
+	0x39, 0x55, 0x54, 0x54, 0x58, 
+	0x00, 0x00, 0x45, 0x7C, 0x41, 
+	0x00, 0x02, 0x45, 0x7D, 0x42, 
+	0x00, 0x01, 0x45, 0x7C, 0x40, 
+	0xF0, 0x29, 0x24, 0x29, 0xF0, 
+	0xF0, 0x28, 0x25, 0x28, 0xF0, 
+	0x7C, 0x54, 0x55, 0x45, 0x00, 
+	0x20, 0x54, 0x54, 0x7C, 0x54, 
+	0x7C, 0x0A, 0x09, 0x7F, 0x49, 
+	0x32, 0x49, 0x49, 0x49, 0x32, 
+	0x32, 0x48, 0x48, 0x48, 0x32, 
+	0x32, 0x4A, 0x48, 0x48, 0x30, 
+	0x3A, 0x41, 0x41, 0x21, 0x7A, 
+	0x3A, 0x42, 0x40, 0x20, 0x78, 
+	0x00, 0x9D, 0xA0, 0xA0, 0x7D, 
+	0x39, 0x44, 0x44, 0x44, 0x39, 
+	0x3D, 0x40, 0x40, 0x40, 0x3D, 
+	0x3C, 0x24, 0xFF, 0x24, 0x24, 
+	0x48, 0x7E, 0x49, 0x43, 0x66, 
+	0x2B, 0x2F, 0xFC, 0x2F, 0x2B, 
+	0xFF, 0x09, 0x29, 0xF6, 0x20, 
+	0xC0, 0x88, 0x7E, 0x09, 0x03, 
+	0x20, 0x54, 0x54, 0x79, 0x41, 
+	0x00, 0x00, 0x44, 0x7D, 0x41, 
+	0x30, 0x48, 0x48, 0x4A, 0x32, 
+	0x38, 0x40, 0x40, 0x22, 0x7A, 
+	0x00, 0x7A, 0x0A, 0x0A, 0x72, 
+	0x7D, 0x0D, 0x19, 0x31, 0x7D, 
+	0x26, 0x29, 0x29, 0x2F, 0x28, 
+	0x26, 0x29, 0x29, 0x29, 0x26, 
+	0x30, 0x48, 0x4D, 0x40, 0x20, 
+	0x38, 0x08, 0x08, 0x08, 0x08, 
+	0x08, 0x08, 0x08, 0x08, 0x38, 
+	0x2F, 0x10, 0xC8, 0xAC, 0xBA, 
+	0x2F, 0x10, 0x28, 0x34, 0xFA, 
+	0x00, 0x00, 0x7B, 0x00, 0x00, 
+	0x08, 0x14, 0x2A, 0x14, 0x22, 
+	0x22, 0x14, 0x2A, 0x14, 0x08, 
+	0xAA, 0x00, 0x55, 0x00, 0xAA, 
+	0xAA, 0x55, 0xAA, 0x55, 0xAA, 
+	0x00, 0x00, 0x00, 0xFF, 0x00, 
+	0x10, 0x10, 0x10, 0xFF, 0x00, 
+	0x14, 0x14, 0x14, 0xFF, 0x00, 
+	0x10, 0x10, 0xFF, 0x00, 0xFF, 
+	0x10, 0x10, 0xF0, 0x10, 0xF0, 
+	0x14, 0x14, 0x14, 0xFC, 0x00, 
+	0x14, 0x14, 0xF7, 0x00, 0xFF, 
+	0x00, 0x00, 0xFF, 0x00, 0xFF, 
+	0x14, 0x14, 0xF4, 0x04, 0xFC, 
+	0x14, 0x14, 0x17, 0x10, 0x1F, 
+	0x10, 0x10, 0x1F, 0x10, 0x1F, 
+	0x14, 0x14, 0x14, 0x1F, 0x00, 
+	0x10, 0x10, 0x10, 0xF0, 0x00, 
+	0x00, 0x00, 0x00, 0x1F, 0x10, 
+	0x10, 0x10, 0x10, 0x1F, 0x10, 
+	0x10, 0x10, 0x10, 0xF0, 0x10, 
+	0x00, 0x00, 0x00, 0xFF, 0x10, 
+	0x10, 0x10, 0x10, 0x10, 0x10, 
+	0x10, 0x10, 0x10, 0xFF, 0x10, 
+	0x00, 0x00, 0x00, 0xFF, 0x14, 
+	0x00, 0x00, 0xFF, 0x00, 0xFF, 
+	0x00, 0x00, 0x1F, 0x10, 0x17, 
+	0x00, 0x00, 0xFC, 0x04, 0xF4, 
+	0x14, 0x14, 0x17, 0x10, 0x17, 
+	0x14, 0x14, 0xF4, 0x04, 0xF4, 
+	0x00, 0x00, 0xFF, 0x00, 0xF7, 
+	0x14, 0x14, 0x14, 0x14, 0x14, 
+	0x14, 0x14, 0xF7, 0x00, 0xF7, 
+	0x14, 0x14, 0x14, 0x17, 0x14, 
+	0x10, 0x10, 0x1F, 0x10, 0x1F, 
+	0x14, 0x14, 0x14, 0xF4, 0x14, 
+	0x10, 0x10, 0xF0, 0x10, 0xF0, 
+	0x00, 0x00, 0x1F, 0x10, 0x1F, 
+	0x00, 0x00, 0x00, 0x1F, 0x14, 
+	0x00, 0x00, 0x00, 0xFC, 0x14, 
+	0x00, 0x00, 0xF0, 0x10, 0xF0, 
+	0x10, 0x10, 0xFF, 0x10, 0xFF, 
+	0x14, 0x14, 0x14, 0xFF, 0x14, 
+	0x10, 0x10, 0x10, 0x1F, 0x00, 
+	0x00, 0x00, 0x00, 0xF0, 0x10, 
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 
+	0xFF, 0xFF, 0xFF, 0x00, 0x00, 
+	0x00, 0x00, 0x00, 0xFF, 0xFF, 
+	0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 
+	0x38, 0x44, 0x44, 0x38, 0x44, 
+	0x7C, 0x2A, 0x2A, 0x3E, 0x14, 
+	0x7E, 0x02, 0x02, 0x06, 0x06, 
+	0x02, 0x7E, 0x02, 0x7E, 0x02, 
+	0x63, 0x55, 0x49, 0x41, 0x63, 
+	0x38, 0x44, 0x44, 0x3C, 0x04, 
+	0x40, 0x7E, 0x20, 0x1E, 0x20, 
+	0x06, 0x02, 0x7E, 0x02, 0x02, 
+	0x99, 0xA5, 0xE7, 0xA5, 0x99, 
+	0x1C, 0x2A, 0x49, 0x2A, 0x1C, 
+	0x4C, 0x72, 0x01, 0x72, 0x4C, 
+	0x30, 0x4A, 0x4D, 0x4D, 0x30, 
+	0x30, 0x48, 0x78, 0x48, 0x30, 
+	0xBC, 0x62, 0x5A, 0x46, 0x3D, 
+	0x3E, 0x49, 0x49, 0x49, 0x00, 
+	0x7E, 0x01, 0x01, 0x01, 0x7E, 
+	0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 
+	0x44, 0x44, 0x5F, 0x44, 0x44, 
+	0x40, 0x51, 0x4A, 0x44, 0x40, 
+	0x40, 0x44, 0x4A, 0x51, 0x40, 
+	0x00, 0x00, 0xFF, 0x01, 0x03, 
+	0xE0, 0x80, 0xFF, 0x00, 0x00, 
+	0x08, 0x08, 0x6B, 0x6B, 0x08,
+	0x36, 0x12, 0x36, 0x24, 0x36, 
+	0x06, 0x0F, 0x09, 0x0F, 0x06, 
+	0x00, 0x00, 0x18, 0x18, 0x00, 
+	0x00, 0x00, 0x10, 0x10, 0x00, 
+	0x30, 0x40, 0xFF, 0x01, 0x01, 
+	0x00, 0x1F, 0x01, 0x01, 0x1E, 
+	0x00, 0x19, 0x1D, 0x17, 0x12, 
+	0x00, 0x3C, 0x3C, 0x3C, 0x3C, 
+	0x00, 0x00, 0x00, 0x00, 0x00, 
+};
+#endif

examples/tftpaint_shield/tftpaint_shield.ino

@@ -5,6 +5,11 @@
 #include <Adafruit_TFTLCD.h> // Hardware-specific library
 #include <TouchScreen.h>
 
+#if defined(__SAM3X8E__)
+    #undef __FlashStringHelper::F(string_literal)
+    #define F(string_literal) string_literal
+#endif
+
 #ifndef USE_ADAFRUIT_SHIELD_PINOUT 
  #error "This sketch is intended for use with the TFT LCD Shield. Make sure that USE_ADAFRUIT_SHIELD_PINOUT is #defined in the Adafruit_TFTLCD.h library file."
 #endif
@@ -15,10 +20,17 @@
 #define YM 7   // can be a digital pin
 #define XP 6   // can be a digital pin
 
+#ifdef __SAM3X8E__
+  #define TS_MINX 125
+  #define TS_MINY 170
+  #define TS_MAXX 880
+  #define TS_MAXY 940
+#else
   #define TS_MINX  150
   #define TS_MINY  120
   #define TS_MAXX  920
   #define TS_MAXY  940
+#endif
 
 // For better pressure precision, we need to know the resistance
 // between X+ and X- Use any multimeter to read it
@@ -91,7 +103,7 @@ void setup(void) {
 void loop()
 {
   digitalWrite(13, HIGH);
-  Point p = ts.getPoint();
+  TSPoint p = ts.getPoint();
   digitalWrite(13, LOW);
 
   // if sharing pins, you'll need to fix the directions of the touchscreen pins

library.properties

@@ -0,0 +1,10 @@
+name=Adafruit TFTLCD Library
+version=1.0.3
+author=Adafruit
+maintainer=Adafruit <info@adafruit.com>
+sentence=Adafruit 2.8" TFT display Library
+paragraph=Adafruit 2.8" TFT display Library
+category=Display
+url=https://github.com/adafruit/TFTLCD-Library
+architectures=*
+depends=Adafruit GFX Library

pin_magic.h

@@ -37,6 +37,7 @@
 // Uno port/pin :  PD7  PD6  PB5  PD4  PB3  PB2  PB1  PB0
 // Mega port/pin:  PH4  PH3  PB7  PG5  PB5  PB4  PH6  PH5
 // Leo port/pin :  PE6  PD7  PC7  PD4  PB7  PB6  PB5  PB4
+// Due port/pin : PC23 PC24 PB27 PC26  PD7 PC29 PC21 PC22
 // Breakout pin usage:
 // LCD Data Bit :   7   6   5   4   3   2   1   0
 // Uno dig. pin :   7   6   5   4   3   2   9   8
@@ -45,6 +46,8 @@
 // Mega port/pin: PA7 PA6 PA5 PA4 PA3 PA2 PA1 PA0 (one contiguous PORT)
 // Leo dig. pin :   7   6   5   4   3   2   9   8
 // Leo port/pin : PE6 PD7 PC6 PD4 PD0 PD1 PB5 PB4
+// Due dig. pin :  40  39  38  37  36  35  34  33
+// Due port/pin : PC8 PC7 PC6 PC5 PC4 PC3 PC2 PC1 (one contiguous PORT. -ish…)
 
 // Pixel read operations require a minimum 400 nS delay from RD_ACTIVE
 // to polling the input pins.  At 16 MHz, one machine cycle is 62.5 nS.
@@ -52,14 +55,17 @@
 // equivalent to two NOPs each, final NOP burns the 7th cycle, and the
 // last line is a radioactive mutant emoticon.
 #define DELAY7                                                                 \
-  asm volatile(       \
-    "rjmp .+0" "\n\t" \
-    "rjmp .+0" "\n\t" \
-    "rjmp .+0" "\n\t" \
-    "nop"      "\n"   \
-    ::);
+  asm volatile("rjmp .+0"                                                      \
+               "\n\t"                                                          \
+               "rjmp .+0"                                                      \
+               "\n\t"                                                          \
+               "rjmp .+0"                                                      \
+               "\n\t"                                                          \
+               "nop"                                                           \
+               "\n" ::);
 
-#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined (__AVR_ATmega328__) || defined(__AVR_ATmega8__)
+#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) ||               \
+    defined(__AVR_ATmega328__) || defined(__AVR_ATmega8__)
 
 // Arduino Uno, Duemilanove, etc.
 
@@ -67,10 +73,10 @@
 
 // LCD control lines:
 // RD (read), WR (write), CD (command/data), CS (chip select)
-  #define RD_PORT PORTC
-  #define WR_PORT PORTC
-  #define CD_PORT PORTC
-  #define CS_PORT PORTC
+#define RD_PORT PORTC /*pin A0 */
+#define WR_PORT PORTC /*pin A1 */
+#define CD_PORT PORTC /*pin A2 */
+#define CS_PORT PORTC /*pin A3 */
 #define RD_MASK B00000001
 #define WR_MASK B00000010
 #define CD_MASK B00000100
@@ -79,19 +85,23 @@
 // These are macros for I/O operations...
 
 // Write 8-bit value to LCD data lines
-  #define write8inline(d) {                          \
+#define write8inline(d)                                                        \
+  {                                                                            \
     PORTD = (PORTD & B00101111) | ((d)&B11010000);                             \
     PORTB = (PORTB & B11010000) | ((d)&B00101111);                             \
-    WR_STROBE; } // STROBEs are defined later
+    WR_STROBE;                                                                 \
+  } // STROBEs are defined later
 
 // Read 8-bit value from LCD data lines.  The signle argument
 // is a destination variable; this isn't a function and doesn't
 // return a value in the conventional sense.
-  #define read8inline(result) {                       \
+#define read8inline(result)                                                    \
+  {                                                                            \
     RD_ACTIVE;                                                                 \
     DELAY7;                                                                    \
     result = (PIND & B11010000) | (PINB & B00101111);                          \
-    RD_IDLE; }
+    RD_IDLE;                                                                   \
+  }
 
 // These set the PORT directions as required before the write and read
 // operations.  Because write operations are much more common than reads,
@@ -99,22 +109,42 @@
 // input before a read, and restore them back to the write state before
 // returning.  This avoids having to set it for output inside every
 // drawing method.  The default state has them initialized for writes.
-  #define setWriteDirInline() { DDRD |=  B11010000; DDRB |=  B00101111; }
-  #define setReadDirInline()  { DDRD &= ~B11010000; DDRB &= ~B00101111; }
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    DDRD |= B11010000;                                                         \
+    DDRB |= B00101111;                                                         \
+  }
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    DDRD &= ~B11010000;                                                        \
+    DDRB &= ~B00101111;                                                        \
+  }
 
 #else // Uno w/Breakout board
 
-  #define write8inline(d) {                          \
+#define write8inline(d)                                                        \
+  {                                                                            \
     PORTD = (PORTD & B00000011) | ((d)&B11111100);                             \
     PORTB = (PORTB & B11111100) | ((d)&B00000011);                             \
-    WR_STROBE; }
-  #define read8inline(result) {                       \
+    WR_STROBE;                                                                 \
+  }
+#define read8inline(result)                                                    \
+  {                                                                            \
     RD_ACTIVE;                                                                 \
     DELAY7;                                                                    \
     result = (PIND & B11111100) | (PINB & B00000011);                          \
-    RD_IDLE; }
-  #define setWriteDirInline() { DDRD |=  B11111100; DDRB |=  B00000011; }
-  #define setReadDirInline()  { DDRD &= ~B11111100; DDRB &= ~B00000011; }
+    RD_IDLE;                                                                   \
+  }
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    DDRD |= B11111100;                                                         \
+    DDRB |= B00000011;                                                         \
+  }
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    DDRD &= ~B11111100;                                                        \
+    DDRB &= ~B00000011;                                                        \
+  }
 
 #endif
 
@@ -126,7 +156,8 @@
 // why only certain cases are inlined for each board.
 #define write8 write8inline
 
-#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__) 
+#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) ||            \
+    defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
 
 // Arduino Mega, ADK, etc.
 
@@ -141,30 +172,49 @@
 #define CD_MASK B00000100
 #define CS_MASK B00001000
 
-  #define write8inline(d) {                                              \
-    PORTH = (PORTH&B10000111)|(((d)&B11000000)>>3)|(((d)&B00000011)<<5); \
+#define write8inline(d)                                                        \
+  {                                                                            \
+    PORTH =                                                                    \
+        (PORTH & B10000111) | (((d)&B11000000) >> 3) | (((d)&B00000011) << 5); \
     PORTB = (PORTB & B01001111) | (((d)&B00101100) << 2);                      \
     PORTG = (PORTG & B11011111) | (((d)&B00010000) << 1);                      \
-    WR_STROBE; }
-  #define read8inline(result) {                                      \
+    WR_STROBE;                                                                 \
+  }
+#define read8inline(result)                                                    \
+  {                                                                            \
     RD_ACTIVE;                                                                 \
     DELAY7;                                                                    \
     result = ((PINH & B00011000) << 3) | ((PINB & B10110000) >> 2) |           \
              ((PING & B00100000) >> 1) | ((PINH & B01100000) >> 5);            \
-    RD_IDLE; }
-  #define setWriteDirInline() {                                   \
-    DDRH |=  B01111000; DDRB |=  B10110000; DDRG |=  B00100000; }
-  #define setReadDirInline()  {                                   \
-    DDRH &= ~B01111000; DDRB &= ~B10110000; DDRG &= ~B00100000; }
+    RD_IDLE;                                                                   \
+  }
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    DDRH |= B01111000;                                                         \
+    DDRB |= B10110000;                                                         \
+    DDRG |= B00100000;                                                         \
+  }
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    DDRH &= ~B01111000;                                                        \
+    DDRB &= ~B10110000;                                                        \
+    DDRG &= ~B00100000;                                                        \
+  }
 
 #else // Mega w/Breakout board
 
-  #define write8inline(d)   { PORTA = (d); WR_STROBE; }
-  #define read8inline(result) { \
+#define write8inline(d)                                                        \
+  {                                                                            \
+    PORTA = (d);                                                               \
+    WR_STROBE;                                                                 \
+  }
+#define read8inline(result)                                                    \
+  {                                                                            \
     RD_ACTIVE;                                                                 \
     DELAY7;                                                                    \
     result = PINA;                                                             \
-    RD_IDLE; }
+    RD_IDLE;                                                                   \
+  }
 #define setWriteDirInline() DDRA = 0xff
 #define setReadDirInline() DDRA = 0
 
@@ -199,50 +249,74 @@
 #define CD_MASK B00100000
 #define CS_MASK B00010000
 
-  #define write8inline(d) {                                                   \
+#define write8inline(d)                                                        \
+  {                                                                            \
     PORTE = (PORTE & B10111111) | (((d)&B10000000) >> 1);                      \
     PORTD = (PORTD & B01101111) | (((d)&B01000000) << 1) | ((d)&B00010000);    \
     PORTC = (PORTC & B01111111) | (((d)&B00100000) << 2);                      \
     PORTB = (PORTB & B00001111) | (((d)&B00001111) << 4);                      \
-    WR_STROBE; }
-  #define read8inline(result) {                                      \
+    WR_STROBE;                                                                 \
+  }
+#define read8inline(result)                                                    \
+  {                                                                            \
     RD_ACTIVE;                                                                 \
     DELAY7;                                                                    \
     result = ((PINE & B01000000) << 1) | ((PIND & B10000000) >> 1) |           \
              ((PINC & B10000000) >> 2) | ((PINB & B11110000) >> 4) |           \
              (PIND & B00010000);                                               \
-    RD_IDLE; }
-  #define setWriteDirInline() {               \
-    DDRE |=  B01000000; DDRD |=  B10010000;   \
-    DDRC |=  B10000000; DDRB |=  B11110000; }
-  #define setReadDirInline() {                \
-    DDRE &= ~B01000000; DDRD &= ~B10010000;   \
-    DDRC &= ~B10000000; DDRB &= ~B11110000; }
+    RD_IDLE;                                                                   \
+  }
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    DDRE |= B01000000;                                                         \
+    DDRD |= B10010000;                                                         \
+    DDRC |= B10000000;                                                         \
+    DDRB |= B11110000;                                                         \
+  }
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    DDRE &= ~B01000000;                                                        \
+    DDRD &= ~B10010000;                                                        \
+    DDRC &= ~B10000000;                                                        \
+    DDRB &= ~B11110000;                                                        \
+  }
 
 #else // Leonardo w/Breakout board
 
-  #define write8inline(d) {                                                   \
+#define write8inline(d)                                                        \
+  {                                                                            \
     uint8_t dr1 = (d) >> 1, dl1 = (d) << 1;                                    \
     PORTE = (PORTE & B10111111) | (dr1 & B01000000);                           \
     PORTD = (PORTD & B01101100) | (dl1 & B10000000) | (((d)&B00001000) >> 3) | \
             (dr1 & B00000010) | ((d)&B00010000);                               \
     PORTC = (PORTC & B10111111) | (dl1 & B01000000);                           \
     PORTB = (PORTB & B11001111) | (((d)&B00000011) << 4);                      \
-    WR_STROBE; }
-  #define read8inline(result) {                                       \
+    WR_STROBE;                                                                 \
+  }
+#define read8inline(result)                                                    \
+  {                                                                            \
     RD_ACTIVE;                                                                 \
     DELAY7;                                                                    \
     result = (((PINE & B01000000) | (PIND & B00000010)) << 1) |                \
              (((PINC & B01000000) | (PIND & B10000000)) >> 1) |                \
              ((PIND & B00000001) << 3) | ((PINB & B00110000) >> 4) |           \
              (PIND & B00010000);                                               \
-    RD_IDLE; }
-  #define setWriteDirInline() {               \
-    DDRE |=  B01000000; DDRD |=  B10010011;   \
-    DDRC |=  B01000000; DDRB |=  B00110000; }
-  #define setReadDirInline() {                \
-    DDRE &= ~B01000000; DDRD &= ~B10010011;   \
-    DDRC &= ~B01000000; DDRB &= ~B00110000; }
+    RD_IDLE;                                                                   \
+  }
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    DDRE |= B01000000;                                                         \
+    DDRD |= B10010011;                                                         \
+    DDRC |= B01000000;                                                         \
+    DDRB |= B00110000;                                                         \
+  }
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    DDRE &= ~B01000000;                                                        \
+    DDRD &= ~B10010011;                                                        \
+    DDRC &= ~B01000000;                                                        \
+    DDRB &= ~B00110000;                                                        \
+  }
 
 #endif
 
@@ -252,13 +326,150 @@
 // program to compile.
 #define write8 write8inline
 
+#elif defined(__SAM3X8E__)
+
+// Arduino Due
+
+#ifdef USE_ADAFRUIT_SHIELD_PINOUT
+
+#define RD_PORT PIOA /*pin A0 */
+#define WR_PORT PIOA /*pin A1 */
+#define CD_PORT PIOA /*pin A2 */
+#define CS_PORT PIOA /*pin A3 */
+#define RD_MASK 0x00010000
+#define WR_MASK 0x01000000
+#define CD_MASK 0x00800000
+#define CS_MASK 0x00400000
+
+#define write8inline(d)                                                        \
+  {                                                                            \
+    PIO_Set(PIOD, (((d)&0x08) << (7 - 3)));                                    \
+    PIO_Clear(PIOD, (((~d) & 0x08) << (7 - 3)));                               \
+    PIO_Set(PIOC, (((d)&0x01) << (22 - 0)) | (((d)&0x02) << (21 - 1)) |        \
+                      (((d)&0x04) << (29 - 2)) | (((d)&0x10) << (26 - 4)) |    \
+                      (((d)&0x40) << (24 - 6)) | (((d)&0x80) << (23 - 7)));    \
+    PIO_Clear(PIOC,                                                            \
+              (((~d) & 0x01) << (22 - 0)) | (((~d) & 0x02) << (21 - 1)) |      \
+                  (((~d) & 0x04) << (29 - 2)) | (((~d) & 0x10) << (26 - 4)) |  \
+                  (((~d) & 0x40) << (24 - 6)) | (((~d) & 0x80) << (23 - 7)));  \
+    PIO_Set(PIOB, (((d)&0x20) << (27 - 5)));                                   \
+    PIO_Clear(PIOB, (((~d) & 0x20) << (27 - 5)));                              \
+    WR_STROBE;                                                                 \
+  }
+
+#define read8inline(result)                                                    \
+  {                                                                            \
+                                                                               \
+    RD_ACTIVE;                                                                 \
+    delayMicroseconds(1);                                                      \
+    result = (((PIOC->PIO_PDSR & (1 << 23)) >> (23 - 7)) |                     \
+              ((PIOC->PIO_PDSR & (1 << 24)) >> (24 - 6)) |                     \
+              ((PIOB->PIO_PDSR & (1 << 27)) >> (27 - 5)) |                     \
+              ((PIOC->PIO_PDSR & (1 << 26)) >> (26 - 4)) |                     \
+              ((PIOD->PIO_PDSR & (1 << 7)) >> (7 - 3)) |                       \
+              ((PIOC->PIO_PDSR & (1 << 29)) >> (29 - 2)) |                     \
+              ((PIOC->PIO_PDSR & (1 << 21)) >> (21 - 1)) |                     \
+              ((PIOC->PIO_PDSR & (1 << 22)) >> (22 - 0)));                     \
+    RD_IDLE;                                                                   \
+  }
+
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    PIOD->PIO_MDDR |= 0x00000080; /*PIOD->PIO_SODR =  0x00000080;*/            \
+    PIOD->PIO_OER |= 0x00000080;                                               \
+    PIOD->PIO_PER |= 0x00000080;                                               \
+    PIOC->PIO_MDDR |= 0x25E00000; /*PIOC->PIO_SODR =  0x25E00000;*/            \
+    PIOC->PIO_OER |= 0x25E00000;                                               \
+    PIOC->PIO_PER |= 0x25E00000;                                               \
+    PIOB->PIO_MDDR |= 0x08000000; /*PIOB->PIO_SODR =  0x08000000;*/            \
+    PIOB->PIO_OER |= 0x08000000;                                               \
+    PIOB->PIO_PER |= 0x08000000;                                               \
+  }
+
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    pmc_enable_periph_clk(ID_PIOD);                                            \
+    pmc_enable_periph_clk(ID_PIOC);                                            \
+    pmc_enable_periph_clk(ID_PIOB);                                            \
+    PIOD->PIO_PUDR |= 0x00000080;                                              \
+    PIOD->PIO_IFDR |= 0x00000080;                                              \
+    PIOD->PIO_ODR |= 0x00000080;                                               \
+    PIOD->PIO_PER |= 0x00000080;                                               \
+    PIOC->PIO_PUDR |= 0x25E00000;                                              \
+    PIOC->PIO_IFDR |= 0x25E00000;                                              \
+    PIOC->PIO_ODR |= 0x25E00000;                                               \
+    PIOC->PIO_PER |= 0x25E00000;                                               \
+    PIOB->PIO_PUDR |= 0x08000000;                                              \
+    PIOB->PIO_IFDR |= 0x08000000;                                              \
+    PIOB->PIO_ODR |= 0x08000000;                                               \
+    PIOB->PIO_PER |= 0x08000000;                                               \
+  }
+
+// Control signals are ACTIVE LOW (idle is HIGH)
+// Command/Data: LOW = command, HIGH = data
+// These are single-instruction operations and always inline
+#define RD_ACTIVE RD_PORT->PIO_CODR |= RD_MASK
+#define RD_IDLE RD_PORT->PIO_SODR |= RD_MASK
+#define WR_ACTIVE WR_PORT->PIO_CODR |= WR_MASK
+#define WR_IDLE WR_PORT->PIO_SODR |= WR_MASK
+#define CD_COMMAND CD_PORT->PIO_CODR |= CD_MASK
+#define CD_DATA CD_PORT->PIO_SODR |= CD_MASK
+#define CS_ACTIVE CS_PORT->PIO_CODR |= CS_MASK
+#define CS_IDLE CS_PORT->PIO_SODR |= CS_MASK
+
+#else // Due w/Breakout board
+
+#define write8inline(d)                                                        \
+  {                                                                            \
+    PIO_Set(PIOC, (((d)&0xFF) << 1));                                          \
+    PIO_Clear(PIOC, (((~d) & 0xFF) << 1));                                     \
+    WR_STROBE;                                                                 \
+  }
+
+#define read8inline(result)                                                    \
+  {                                                                            \
+    RD_ACTIVE;                                                                 \
+    delayMicroseconds(1);                                                      \
+    result = ((PIOC->PIO_PDSR & 0x1FE) >> 1);                                  \
+    RD_IDLE;                                                                   \
+  }
+
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    PIOC->PIO_MDDR |= 0x000001FE; /*PIOC->PIO_SODR |=  0x000001FE;*/           \
+    PIOC->PIO_OER |= 0x000001FE;                                               \
+    PIOC->PIO_PER |= 0x000001FE;                                               \
+  }
+
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    pmc_enable_periph_clk(ID_PIOC);                                            \
+    PIOC->PIO_PUDR |= 0x000001FE;                                              \
+    PIOC->PIO_IFDR |= 0x000001FE;                                              \
+    PIOC->PIO_ODR |= 0x000001FE;                                               \
+    PIOC->PIO_PER |= 0x000001FE;                                               \
+  }
+
+// When using the TFT breakout board, control pins are configurable.
+#define RD_ACTIVE rdPort->PIO_CODR |= rdPinSet  // PIO_Clear(rdPort, rdPinSet)
+#define RD_IDLE rdPort->PIO_SODR |= rdPinSet    // PIO_Set(rdPort, rdPinSet)
+#define WR_ACTIVE wrPort->PIO_CODR |= wrPinSet  // PIO_Clear(wrPort, wrPinSet)
+#define WR_IDLE wrPort->PIO_SODR |= wrPinSet    // PIO_Set(wrPort, wrPinSet)
+#define CD_COMMAND cdPort->PIO_CODR |= cdPinSet // PIO_Clear(cdPort, cdPinSet)
+#define CD_DATA cdPort->PIO_SODR |= cdPinSet    // PIO_Set(cdPort, cdPinSet)
+#define CS_ACTIVE csPort->PIO_CODR |= csPinSet  // PIO_Clear(csPort, csPinSet)
+#define CS_IDLE csPort->PIO_SODR |= csPinSet    // PIO_Set(csPort, csPinSet)
+
+#endif
+
 #else
 
 #error "Board type unsupported / not recognized"
 
 #endif
 
-// Stuff common to all Arduino board types:
+#if !defined(__SAM3X8E__)
+// Stuff common to all Arduino AVR board types:
 
 #ifdef USE_ADAFRUIT_SHIELD_PINOUT
 
@@ -286,29 +497,57 @@
 #define CS_ACTIVE *csPort &= csPinUnset
 #define CS_IDLE *csPort |= csPinSet
 
+#endif
 #endif
 
 // Data write strobe, ~2 instructions and always inline
-#define WR_STROBE { WR_ACTIVE; WR_IDLE; }
+#define WR_STROBE                                                              \
+  {                                                                            \
+    WR_ACTIVE;                                                                 \
+    WR_IDLE;                                                                   \
+  }
 
 // These higher-level operations are usually functionalized,
 // except on Mega where's there's gobs and gobs of program space.
 
 // Set value of TFT register: 8-bit address, 8-bit value
-#define writeRegister8inline(a, d) { \
-  CD_COMMAND; write8(a); CD_DATA; write8(d); }
+#define writeRegister8inline(a, d)                                             \
+  {                                                                            \
+    CD_COMMAND;                                                                \
+    write8(a);                                                                 \
+    CD_DATA;                                                                   \
+    write8(d);                                                                 \
+  }
 
 // Set value of TFT register: 16-bit address, 16-bit value
 // See notes at top about macro expansion, hence hi & lo temp vars
-#define writeRegister16inline(a, d) { \
+#define writeRegister16inline(a, d)                                            \
+  {                                                                            \
     uint8_t hi, lo;                                                            \
-  hi = (a) >> 8; lo = (a); CD_COMMAND; write8(hi); write8(lo); \
-  hi = (d) >> 8; lo = (d); CD_DATA   ; write8(hi); write8(lo); }
+    hi = (a) >> 8;                                                             \
+    lo = (a);                                                                  \
+    CD_COMMAND;                                                                \
+    write8(hi);                                                                \
+    write8(lo);                                                                \
+    hi = (d) >> 8;                                                             \
+    lo = (d);                                                                  \
+    CD_DATA;                                                                   \
+    write8(hi);                                                                \
+    write8(lo);                                                                \
+  }
 
 // Set value of 2 TFT registers: Two 8-bit addresses (hi & lo), 16-bit value
-#define writeRegisterPairInline(aH, aL, d) { \
+#define writeRegisterPairInline(aH, aL, d)                                     \
+  {                                                                            \
     uint8_t hi = (d) >> 8, lo = (d);                                           \
-  CD_COMMAND; write8(aH); CD_DATA; write8(hi); \
-  CD_COMMAND; write8(aL); CD_DATA; write8(lo); }
+    CD_COMMAND;                                                                \
+    write8(aH);                                                                \
+    CD_DATA;                                                                   \
+    write8(hi);                                                                \
+    CD_COMMAND;                                                                \
+    write8(aL);                                                                \
+    CD_DATA;                                                                   \
+    write8(lo);                                                                \
+  }
 
 #endif // _pin_magic_

registers.h

@@ -0,0 +1,167 @@
+// Register names from Peter Barrett's Microtouch code
+#define ILI932X_START_OSC 0x00
+#define ILI932X_DRIV_OUT_CTRL 0x01
+#define ILI932X_DRIV_WAV_CTRL 0x02
+#define ILI932X_ENTRY_MOD 0x03
+#define ILI932X_RESIZE_CTRL 0x04
+#define ILI932X_DISP_CTRL1 0x07
+#define ILI932X_DISP_CTRL2 0x08
+#define ILI932X_DISP_CTRL3 0x09
+#define ILI932X_DISP_CTRL4 0x0A
+#define ILI932X_RGB_DISP_IF_CTRL1 0x0C
+#define ILI932X_FRM_MARKER_POS 0x0D
+#define ILI932X_RGB_DISP_IF_CTRL2 0x0F
+#define ILI932X_POW_CTRL1 0x10
+#define ILI932X_POW_CTRL2 0x11
+#define ILI932X_POW_CTRL3 0x12
+#define ILI932X_POW_CTRL4 0x13
+#define ILI932X_GRAM_HOR_AD 0x20
+#define ILI932X_GRAM_VER_AD 0x21
+#define ILI932X_RW_GRAM 0x22
+#define ILI932X_POW_CTRL7 0x29
+#define ILI932X_FRM_RATE_COL_CTRL 0x2B
+#define ILI932X_GAMMA_CTRL1 0x30
+#define ILI932X_GAMMA_CTRL2 0x31
+#define ILI932X_GAMMA_CTRL3 0x32
+#define ILI932X_GAMMA_CTRL4 0x35
+#define ILI932X_GAMMA_CTRL5 0x36
+#define ILI932X_GAMMA_CTRL6 0x37
+#define ILI932X_GAMMA_CTRL7 0x38
+#define ILI932X_GAMMA_CTRL8 0x39
+#define ILI932X_GAMMA_CTRL9 0x3C
+#define ILI932X_GAMMA_CTRL10 0x3D
+#define ILI932X_HOR_START_AD 0x50
+#define ILI932X_HOR_END_AD 0x51
+#define ILI932X_VER_START_AD 0x52
+#define ILI932X_VER_END_AD 0x53
+#define ILI932X_GATE_SCAN_CTRL1 0x60
+#define ILI932X_GATE_SCAN_CTRL2 0x61
+#define ILI932X_GATE_SCAN_CTRL3 0x6A
+#define ILI932X_PART_IMG1_DISP_POS 0x80
+#define ILI932X_PART_IMG1_START_AD 0x81
+#define ILI932X_PART_IMG1_END_AD 0x82
+#define ILI932X_PART_IMG2_DISP_POS 0x83
+#define ILI932X_PART_IMG2_START_AD 0x84
+#define ILI932X_PART_IMG2_END_AD 0x85
+#define ILI932X_PANEL_IF_CTRL1 0x90
+#define ILI932X_PANEL_IF_CTRL2 0x92
+#define ILI932X_PANEL_IF_CTRL3 0x93
+#define ILI932X_PANEL_IF_CTRL4 0x95
+#define ILI932X_PANEL_IF_CTRL5 0x97
+#define ILI932X_PANEL_IF_CTRL6 0x98
+
+#define HX8347G_COLADDRSTART_HI 0x02
+#define HX8347G_COLADDRSTART_LO 0x03
+#define HX8347G_COLADDREND_HI 0x04
+#define HX8347G_COLADDREND_LO 0x05
+#define HX8347G_ROWADDRSTART_HI 0x06
+#define HX8347G_ROWADDRSTART_LO 0x07
+#define HX8347G_ROWADDREND_HI 0x08
+#define HX8347G_ROWADDREND_LO 0x09
+#define HX8347G_MEMACCESS 0x16
+
+#define ILI9341_SOFTRESET 0x01
+#define ILI9341_SLEEPIN 0x10
+#define ILI9341_SLEEPOUT 0x11
+#define ILI9341_NORMALDISP 0x13
+#define ILI9341_INVERTOFF 0x20
+#define ILI9341_INVERTON 0x21
+#define ILI9341_GAMMASET 0x26
+#define ILI9341_DISPLAYOFF 0x28
+#define ILI9341_DISPLAYON 0x29
+#define ILI9341_COLADDRSET 0x2A
+#define ILI9341_PAGEADDRSET 0x2B
+#define ILI9341_MEMORYWRITE 0x2C
+#define ILI9341_PIXELFORMAT 0x3A
+#define ILI9341_FRAMECONTROL 0xB1
+#define ILI9341_DISPLAYFUNC 0xB6
+#define ILI9341_ENTRYMODE 0xB7
+#define ILI9341_POWERCONTROL1 0xC0
+#define ILI9341_POWERCONTROL2 0xC1
+#define ILI9341_VCOMCONTROL1 0xC5
+#define ILI9341_VCOMCONTROL2 0xC7
+#define ILI9341_MEMCONTROL 0x36
+#define ILI9341_MADCTL 0x36
+
+#define ILI9341_MADCTL_MY 0x80
+#define ILI9341_MADCTL_MX 0x40
+#define ILI9341_MADCTL_MV 0x20
+#define ILI9341_MADCTL_ML 0x10
+#define ILI9341_MADCTL_RGB 0x00
+#define ILI9341_MADCTL_BGR 0x08
+#define ILI9341_MADCTL_MH 0x04
+
+#define HX8357_NOP 0x00
+#define HX8357_SWRESET 0x01
+#define HX8357_RDDID 0x04
+#define HX8357_RDDST 0x09
+
+#define HX8357B_RDPOWMODE 0x0A
+#define HX8357B_RDMADCTL 0x0B
+#define HX8357B_RDCOLMOD 0x0C
+#define HX8357B_RDDIM 0x0D
+#define HX8357B_RDDSDR 0x0F
+
+#define HX8357_SLPIN 0x10
+#define HX8357_SLPOUT 0x11
+#define HX8357B_PTLON 0x12
+#define HX8357B_NORON 0x13
+
+#define HX8357_INVOFF 0x20
+#define HX8357_INVON 0x21
+#define HX8357_DISPOFF 0x28
+#define HX8357_DISPON 0x29
+
+#define HX8357_CASET 0x2A
+#define HX8357_PASET 0x2B
+#define HX8357_RAMWR 0x2C
+#define HX8357_RAMRD 0x2E
+
+#define HX8357B_PTLAR 0x30
+#define HX8357_TEON 0x35
+#define HX8357_TEARLINE 0x44
+#define HX8357_MADCTL 0x36
+#define HX8357_COLMOD 0x3A
+
+#define HX8357_SETOSC 0xB0
+#define HX8357_SETPWR1 0xB1
+#define HX8357B_SETDISPLAY 0xB2
+#define HX8357_SETRGB 0xB3
+#define HX8357D_SETCOM 0xB6
+
+#define HX8357B_SETDISPMODE 0xB4
+#define HX8357D_SETCYC 0xB4
+#define HX8357B_SETOTP 0xB7
+#define HX8357D_SETC 0xB9
+
+#define HX8357B_SET_PANEL_DRIVING 0xC0
+#define HX8357D_SETSTBA 0xC0
+#define HX8357B_SETDGC 0xC1
+#define HX8357B_SETID 0xC3
+#define HX8357B_SETDDB 0xC4
+#define HX8357B_SETDISPLAYFRAME 0xC5
+#define HX8357B_GAMMASET 0xC8
+#define HX8357B_SETCABC 0xC9
+#define HX8357_SETPANEL 0xCC
+
+#define HX8357B_SETPOWER 0xD0
+#define HX8357B_SETVCOM 0xD1
+#define HX8357B_SETPWRNORMAL 0xD2
+
+#define HX8357B_RDID1 0xDA
+#define HX8357B_RDID2 0xDB
+#define HX8357B_RDID3 0xDC
+#define HX8357B_RDID4 0xDD
+
+#define HX8357D_SETGAMMA 0xE0
+
+#define HX8357B_SETGAMMA 0xC8
+#define HX8357B_SETPANELRELATED 0xE9
+
+#define HX8357B_MADCTL_MY 0x80
+#define HX8357B_MADCTL_MX 0x40
+#define HX8357B_MADCTL_MV 0x20
+#define HX8357B_MADCTL_ML 0x10
+#define HX8357B_MADCTL_RGB 0x00
+#define HX8357B_MADCTL_BGR 0x08
+#define HX8357B_MADCTL_MH 0x04