Merge pull request #6 from brentru/fix-pins-itsy-m0-nrf

Add pinout for nRF52840 and fix pinout for ItsyM0

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,46 @@
+Thank you for opening an issue on an Adafruit Arduino library repository.  To
+improve the speed of resolution please review the following guidelines and
+common troubleshooting steps below before creating the issue:
+
+- **Do not use GitHub issues for troubleshooting projects and issues.**  Instead use
+  the forums at http://forums.adafruit.com to ask questions and troubleshoot why
+  something isn't working as expected.  In many cases the problem is a common issue
+  that you will more quickly receive help from the forum community.  GitHub issues
+  are meant for known defects in the code.  If you don't know if there is a defect
+  in the code then start with troubleshooting on the forum first.
+
+- **If following a tutorial or guide be sure you didn't miss a step.** Carefully
+  check all of the steps and commands to run have been followed.  Consult the
+  forum if you're unsure or have questions about steps in a guide/tutorial.
+
+- **For Arduino projects check these very common issues to ensure they don't apply**:
+
+  - For uploading sketches or communicating with the board make sure you're using
+    a **USB data cable** and **not** a **USB charge-only cable**.  It is sometimes
+    very hard to tell the difference between a data and charge cable!  Try using the
+    cable with other devices or swapping to another cable to confirm it is not
+    the problem.
+
+  - **Be sure you are supplying adequate power to the board.**  Check the specs of
+    your board and plug in an external power supply.  In many cases just
+    plugging a board into your computer is not enough to power it and other
+    peripherals.
+
+  - **Double check all soldering joints and connections.**  Flakey connections
+    cause many mysterious problems.  See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints.
+
+  - **Ensure you are using an official Arduino or Adafruit board.** We can't
+    guarantee a clone board will have the same functionality and work as expected
+    with this code and don't support them.
+
+If you're sure this issue is a defect in the code and checked the steps above
+please fill in the following fields to provide enough troubleshooting information.
+You may delete the guideline and text above to just leave the following details:
+
+- Arduino board:  **INSERT ARDUINO BOARD NAME/TYPE HERE**
+
+- Arduino IDE version (found in Arduino -> About Arduino menu):  **INSERT ARDUINO
+  VERSION HERE**
+
+- List the steps to reproduce the problem below (if possible attach a sketch or
+  copy the sketch code in too): **LIST REPRO STEPS BELOW**

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,26 @@
+Thank you for creating a pull request to contribute to Adafruit's GitHub code!
+Before you open the request please review the following guidelines and tips to
+help it be more easily integrated:
+
+- **Describe the scope of your change--i.e. what the change does and what parts
+  of the code were modified.**  This will help us understand any risks of integrating
+  the code.
+
+- **Describe any known limitations with your change.**  For example if the change
+  doesn't apply to a supported platform of the library please mention it.
+
+- **Please run any tests or examples that can exercise your modified code.**  We
+  strive to not break users of the code and running tests/examples helps with this
+  process.
+
+Thank you again for contributing!  We will try to test and integrate the change
+as soon as we can, but be aware we have many GitHub repositories to manage and
+can't immediately respond to every request.  There is no need to bump or check in
+on a pull request (it will clutter the discussion of the request).
+
+Also don't be worried if the request is closed or not integrated--sometimes the
+priorities of Adafruit's GitHub code (education, ease of use) might not match the
+priorities of the pull request.  Don't fret, the open source community thrives on
+forks and GitHub makes it easy to keep your changes in a forked repo.
+
+After reviewing the guidelines above you can delete this text from the pull request.

.github/workflows/githubci.yml

@@ -0,0 +1,23 @@
+name: Arduino Library CI
+
+on: [pull_request, push, repository_dispatch]
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/setup-python@v1
+      with:
+        python-version: '3.x'
+    - uses: actions/checkout@v2
+    - uses: actions/checkout@v2
+      with:
+         repository: adafruit/ci-arduino
+         path: ci
+
+    - name: pre-install
+      run: bash ci/actions_install.sh
+
+    - name: test platforms
+      run: python3 ci/build_platform.py main_platforms

.travis.yml

@@ -1,47 +0,0 @@
-language: generic
-env:
-  global:
-    - IDE_VERSION=1.8.5
-  matrix:
-    - BOARD="arduino:samd:mkrwifi1010"
-    - BOARD="arduino:samd_beta:mkrvidor4000"
-    - BOARD="arduino:megaavr:uno2018"
-before_install:
-  - wget http://downloads.arduino.cc/arduino-$IDE_VERSION-linux64.tar.xz
-  - tar xf arduino-$IDE_VERSION-linux64.tar.xz
-  - mv arduino-$IDE_VERSION $HOME/arduino-ide
-  - export PATH=$PATH:$HOME/arduino-ide
-  - if [[ "$BOARD" =~ "arduino:samd:" ]]; then
-      arduino --install-boards arduino:samd;
-    fi
-  - if [[ "$BOARD" =~ "arduino:samd_beta:" ]]; then
-      arduino --install-boards arduino:samd_beta;
-      arduino --install-library VidorPeripherals;
-    fi
-  - if [[ "$BOARD" =~ "arduino:megaavr:" ]]; then
-      arduino --install-boards arduino:megaavr;
-    fi
-  - buildExampleSketch() { arduino --verbose-build --verify --board $BOARD $PWD/examples/$1/$1.ino; }
-  - buildExampleToolsSketch() { arduino --verbose-build --verify --board $BOARD $PWD/examples/Tools/$1/$1.ino; }
-install:
-  - mkdir -p $HOME/Arduino/libraries
-  - ln -s $PWD $HOME/Arduino/libraries/.
-script:
-  - buildExampleSketch AP_SimpleWebServer
-  - buildExampleSketch ConnectNoEncryption
-  - buildExampleSketch ConnectWithWEP
-  - buildExampleSketch ConnectWithWPA
-  - buildExampleSketch ScanNetworks
-  - buildExampleSketch ScanNetworksAdvanced
-  - buildExampleSketch SimpleWebServerWiFi
-  - buildExampleSketch WiFiChatServer
-  - buildExampleSketch WiFiPing
-  - buildExampleSketch WiFiSSLClient
-  - buildExampleSketch WiFiUdpNtpClient
-  - buildExampleSketch WiFiUdpSendReceiveString
-  - buildExampleSketch WiFiWebClient
-  - buildExampleSketch WiFiWebClientRepeating
-  - buildExampleSketch WiFiWebServer
-  - buildExampleToolsSketch CheckFirmwareVersion
-  - buildExampleToolsSketch FirmwareUpdater;
-  - buildExampleToolsSketch SerialNINAPassthrough;

README.adoc

@@ -1,6 +1,6 @@
 = WiFiNINA Library for Arduino =
 
-image:https://travis-ci.com/adafruit/WiFiNINA.svg?branch=master["Build Status", link="https://travis-ci.com/adafruit/WiFiNINA"]
+[![Build Status](https://github.com/adafruit/WiFiNINA/workflows/Arduino%20Library%20CI/badge.svg)](https://github.com/adafruit/WiFiNINA/actions)
 
 **Modified to allow any pins to be used for Adafruit Airlift Boards**
 

examples/ConnectNoEncryption/ConnectNoEncryption.ino

@@ -16,9 +16,10 @@
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

examples/ConnectWithWEP/ConnectWithWEP.ino

@@ -26,9 +26,10 @@
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

examples/ConnectWithWPA/ConnectWithWPA.ino

@@ -16,9 +16,10 @@
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

examples/JSONdemo/JSONdemo.ino

@@ -22,9 +22,10 @@ last revision November 2015
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

examples/ScanNetworks/ScanNetworks.ino

@@ -23,9 +23,10 @@
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

examples/ScanNetworksAdvanced/ScanNetworksAdvanced.ino

@@ -23,9 +23,10 @@
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

examples/WiFiPing/WiFiPing.ino

@@ -20,9 +20,10 @@
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

examples/WiFiSSLClient/WiFiSSLClient.ino

@@ -18,9 +18,10 @@ last revision November 2015
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

examples/WiFiUdpNtpClient/WiFiUdpNtpClient.ino

@@ -23,9 +23,10 @@
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

examples/WiFiUdpSendReceiveString/WiFiUdpSendReceiveString.ino

@@ -18,9 +18,10 @@
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

examples/WiFiWebClient/WiFiWebClient.ino

@@ -29,9 +29,10 @@
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

examples/WiFiWebClientRepeating/WiFiWebClientRepeating.ino

@@ -21,9 +21,10 @@
   defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
   defined(ARDUINO_AVR_FEATHER32U4) || \
   defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
   defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V)
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
   // Configure the pins used for the ESP32 connection
   #define SPIWIFI       SPI  // The SPI port
   #define SPIWIFI_SS    13   // Chip select pin

library.properties

@@ -1,5 +1,5 @@
 name=WiFiNINA
-version=1.4.0
+version=1.5.0
 author=Arduino
 maintainer=Arduino <info@arduino.cc>
 sentence=Enables network connection (local and Internet) with the Arduino MKR WiFi 1010, Arduino MKR VIDOR 4000 and Arduino UNO WiFi Rev.2.