adding skips

.github/workflows/githubci.yml

@@ -7,11 +7,11 @@ jobs:
     runs-on: ubuntu-latest
     
     steps:
-    - uses: actions/setup-python@v4
+    - uses: actions/setup-python@v1
       with:
         python-version: '3.x'
-    - uses: actions/checkout@v3
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v2
+    - uses: actions/checkout@v2
       with:
          repository: adafruit/ci-arduino
          path: ci

examples/AP_SimpleWebServer/AP_SimpleWebServer.ino

@@ -18,7 +18,6 @@
 
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
 #include "arduino_secrets.h" 
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h
 char ssid[] = SECRET_SSID;        // your network SSID (name)
@@ -40,9 +39,6 @@ void setup() {
 
   pinMode(led, OUTPUT);      // set the LED pin mode
 
-  // Set up the pins!
-  WiFi.setPins(SPIWIFI_SS, SPIWIFI_ACK, ESP32_RESETN, ESP32_GPIO0, &SPIWIFI);
-
   // check for the WiFi module:
   if (WiFi.status() == WL_NO_MODULE) {
     Serial.println("Communication with WiFi module failed!");

examples/AP_SimpleWebServer/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/ConnectNoEncryption/ConnectNoEncryption.ino

@@ -11,7 +11,48 @@
  */
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16   // Chip select pin
+  #define ESP32_RESETN  15   // Reset pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
+
 #include "arduino_secrets.h" 
 
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h
@@ -25,9 +66,7 @@ void setup() {
     ; // wait for serial port to connect. Needed for native USB port only
   }
 
-  // Set up the pins!
   WiFi.setPins(SPIWIFI_SS, SPIWIFI_ACK, ESP32_RESETN, ESP32_GPIO0, &SPIWIFI);
-
   // check for the WiFi module:
   if (WiFi.status() == WL_NO_MODULE) {
     Serial.println("Communication with WiFi module failed!");

examples/ConnectNoEncryption/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/ConnectWithWEP/ConnectWithWEP.ino

@@ -21,7 +21,48 @@
  */
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16  // Chip select pin
+  #define ESP32_RESETN  15  // Reset pin
+  #define SPIWIFI_ACK    7  // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)  // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
+
 #include "arduino_secrets.h" 
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h
 char ssid[] = SECRET_SSID;        // your network SSID (name)

examples/ConnectWithWEP/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/ConnectWithWPA/ConnectWithWPA.ino

@@ -11,7 +11,48 @@
  */
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16  // Chip select pin
+  #define ESP32_RESETN  15  // Reset pin
+  #define SPIWIFI_ACK    7  // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)  // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
+
 #include "arduino_secrets.h" 
 
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h

examples/ConnectWithWPA/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/JSONdemo/JSONdemo.ino

@@ -17,7 +17,47 @@ last revision November 2015
 // uncomment the next line if you have a 128x32 OLED on the I2C pins
 //#define USE_OLED
 
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+// Configure the pins used for the ESP32 connection
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16  // Chip select pin
+  #define ESP32_RESETN  15  // Reset pin
+  #define SPIWIFI_ACK    7  // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)  // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
 
 #if defined(USE_OLED)
   #include <Adafruit_SSD1306.h>

examples/JSONdemo/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/RGBLED/RGBLED.ino

@@ -0,0 +1,87 @@
+/*
+
+ This example shows how to use the built in RGB LED
+
+ Circuit:
+ * Board with NINA firmware on it (In this case its an Adafruit AirLift)
+
+ Written by Bryan Siepert for Adafruit Industries on the 30th of October in the year of our Rona, 2020
+ */
+
+
+#include <SPI.h>
+#include <WiFiNINA.h>
+
+ // Configure the pins used for the ESP32 connection
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+	defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+ defined(ARDUINO_AVR_FEATHER32U4) || \
+	defined(ARDUINO_NRF52840_FEATHER)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   10
+
+#elif defined(ARDUINO_AVR_FEATHER328P) 
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16  // Chip select pin
+  #define ESP32_RESETN  15  // Reset pin
+  #define SPIWIFI_ACK    7  // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+
+#elif defined(TEENSYDUINO) 
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#endif
+
+void setup() {
+  //Initialize serial and wait for port to open:
+  Serial.begin(115200);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+
+  Serial.println("WiFi Scanning test");
+
+  // Set up the pins!
+  WiFi.setPins(SPIWIFI_SS, SPIWIFI_ACK, ESP32_RESETN, ESP32_GPIO0, &SPIWIFI);
+
+  // check for the WiFi module:
+  while (WiFi.status() == WL_NO_MODULE) {
+    Serial.println("Communication with WiFi module failed!");
+    // don't continue
+    delay(1000);
+  }
+  String fv = WiFi.firmwareVersion();
+  Serial.println(fv);
+  if (fv < "1.0.0") {
+    Serial.println("Please upgrade the firmware");
+    while (1) delay(10);
+  }
+  Serial.println("Firmware OK");
+
+}
+
+void loop() {
+   WiFi.setLEDs(255, 0, 0); // RED
+   delay(100);
+   WiFi.setLEDs(0, 255, 0); // GREEN
+   delay(100);
+   WiFi.setLEDs(0, 0, 255); // BLUE
+   delay(100);
+   WiFi.setLEDs(0, 0, 0); // OFF
+   delay(50);
+
+}

examples/ScanNetworks/ScanNetworks.ino

@@ -17,7 +17,49 @@
 
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+// Configure the pins used for the ESP32 connection
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16   // Chip select pin
+  #define ESP32_RESETN  15   // Reset pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
+
 
 void setup() {
   //Initialize serial and wait for port to open:
@@ -105,9 +147,7 @@ void printEncryptionType(int thisType) {
       break;
     case ENC_TYPE_UNKNOWN:
     default:
-      Serial.print("Unknown (");
-      Serial.print(thisType);
-      Serial.println(")");
+      Serial.println("Unknown");
       break;
   }
 }

examples/ScanNetworks/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/ScanNetworksAdvanced/ScanNetworksAdvanced.ino

@@ -18,7 +18,47 @@
 
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16   // Chip select pin
+  #define ESP32_RESETN  15   // Reset pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
 
 void setup() {
   //Initialize serial and wait for port to open:

examples/ScanNetworksAdvanced/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/SimpleWebServerWiFi/SimpleWebServerWiFi.ino

@@ -22,7 +22,7 @@
  */
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
 #include "arduino_secrets.h" 
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h
 char ssid[] = SECRET_SSID;        // your network SSID (name)
@@ -36,9 +36,6 @@ void setup() {
   Serial.begin(9600);      // initialize serial communication
   pinMode(9, OUTPUT);      // set the LED pin mode
 
-  // Set up the pins!
-  WiFi.setPins(SPIWIFI_SS, SPIWIFI_ACK, ESP32_RESETN, ESP32_GPIO0, &SPIWIFI);
-
   // check for the WiFi module:
   if (WiFi.status() == WL_NO_MODULE) {
     Serial.println("Communication with WiFi module failed!");

examples/SimpleWebServerWiFi/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/Tools/CheckFirmwareVersion/CheckFirmwareVersion.ino

@@ -10,7 +10,6 @@
  */
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
 
 void setup() {
   // Initialize serial
@@ -23,9 +22,6 @@ void setup() {
   Serial.println("WiFiNINA firmware check.");
   Serial.println();
 
-  // Set up the pins!
-  WiFi.setPins(SPIWIFI_SS, SPIWIFI_ACK, ESP32_RESETN, ESP32_GPIO0, &SPIWIFI);
-
   // check for the WiFi module:
   if (WiFi.status() == WL_NO_MODULE) {
     Serial.println("Communication with WiFi module failed!");

examples/Tools/CheckFirmwareVersion/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/WiFiChatServer/WiFiChatServer.ino

@@ -21,7 +21,6 @@
 
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
 
 #include "arduino_secrets.h" 
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h
@@ -43,9 +42,6 @@ void setup() {
     ; // wait for serial port to connect. Needed for native USB port only
   }
 
-  // Set up the pins!
-  WiFi.setPins(SPIWIFI_SS, SPIWIFI_ACK, ESP32_RESETN, ESP32_GPIO0, &SPIWIFI);
-
   // check for the WiFi module:
   if (WiFi.status() == WL_NO_MODULE) {
     Serial.println("Communication with WiFi module failed!");

examples/WiFiChatServer/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/WiFiPing/WiFiPing.ino

@@ -15,7 +15,48 @@
 */
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16   // Chip select pin
+  #define ESP32_RESETN  15   // Reset pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
+
 #include "arduino_secrets.h" 
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h
 char ssid[] = SECRET_SSID;        // your network SSID (name)

examples/WiFiPing/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/WiFiSSLClient/WiFiSSLClient.ino

@@ -12,7 +12,49 @@ last revision November 2015
 
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+// Configure the pins used for the ESP32 connection
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P) 
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO) 
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16   // Chip select pin
+  #define ESP32_RESETN  15   // Reset pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
+
 #include "arduino_secrets.h" 
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h
 char ssid[] = SECRET_SSID;        // your network SSID (name)
@@ -24,8 +66,8 @@ int status = WL_IDLE_STATUS;
 // use the numeric IP instead of the name for the server:
 //IPAddress server(74,125,232,128);  // numeric IP for Google (no DNS)
 
-#define SERVER "httpbin.org"
-#define PATH   "/get"
+#define SERVER "cdn.syndication.twimg.com"
+#define PATH   "/widgets/followbutton/info.json?screen_names=adafruit"
 
 // Initialize the SSL client library
 // with the IP address and port of the server

examples/WiFiSSLClient/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/WiFiUdpNtpClient/WiFiUdpNtpClient.ino

@@ -18,7 +18,48 @@
 
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16   // Chip select pin
+  #define ESP32_RESETN  15   // Reset pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
+
 #include <WiFiUdp.h>
 
 int status = WL_IDLE_STATUS;
@@ -128,7 +169,7 @@ void loop() {
 }
 
 // send an NTP request to the time server at the given address
-void sendNTPpacket(IPAddress& address) {
+unsigned long sendNTPpacket(IPAddress& address) {
   //Serial.println("1");
   // set all bytes in the buffer to 0
   memset(packetBuffer, 0, NTP_PACKET_SIZE);

examples/WiFiUdpNtpClient/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/WiFiUdpSendReceiveString/WiFiUdpSendReceiveString.ino

@@ -13,7 +13,48 @@
 
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16   // Chip select pin
+  #define ESP32_RESETN  15   // Reset pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
+
 #include <WiFiUdp.h>
 
 int status = WL_IDLE_STATUS;

examples/WiFiUdpSendReceiveString/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/WiFiWebClient/WiFiWebClient.ino

@@ -23,7 +23,49 @@
 
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+// Configure the pins used for the ESP32 connection
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16   // Chip select pin
+  #define ESP32_RESETN  15   // Reset pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
+
 #include "arduino_secrets.h"
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h
 char ssid[] = SECRET_SSID;        // your network SSID (name)

examples/WiFiWebClient/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/WiFiWebClientRepeating/WiFiWebClientRepeating.ino

@@ -16,7 +16,48 @@
 
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
+  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
+  defined(ARDUINO_AVR_FEATHER32U4) || \
+  defined(ARDUINO_NRF52840_FEATHER) || \
+  defined(ADAFRUIT_ITSYBITSY_M0) || \
+  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
+  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
+  defined(ARDUINO_NRF52_ITSYBITSY)
+  // Configure the pins used for the ESP32 connection
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    13   // Chip select pin
+  #define ESP32_RESETN  12   // Reset pin
+  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_AVR_FEATHER328P)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     4   // Chip select pin
+  #define ESP32_RESETN   3   // Reset pin
+  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(TEENSYDUINO)
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS     5   // Chip select pin
+  #define ESP32_RESETN   6   // Reset pin
+  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif defined(ARDUINO_NRF52832_FEATHER )
+  #define SPIWIFI       SPI  // The SPI port
+  #define SPIWIFI_SS    16   // Chip select pin
+  #define ESP32_RESETN  15   // Reset pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_GPIO0   -1
+#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI       SPI
+  #define SPIWIFI_SS    10   // Chip select pin
+  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
+  #define ESP32_RESETN   5   // Reset pin
+  #define ESP32_GPIO0   -1   // Not connected
+#endif
+
 #include "arduino_secrets.h" 
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h
 char ssid[] = SECRET_SSID;   // your network SSID (name)

examples/WiFiWebClientRepeating/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif

examples/WiFiWebServer/WiFiWebServer.ino

@@ -18,7 +18,17 @@
 
 #include <SPI.h>
 #include <WiFiNINA.h>
-#include "pin_config.h" // Configure the pins used for the ESP32 connection
+
+// if the wifi definition isnt in the board variant
+#if !defined(SPIWIFI_SS)
+  // Don't change the names of these #define's! they match the variant ones
+  #define SPIWIFI_SS       10
+  #define SPIWIFI_ACK       7
+  #define ESP32_RESETN      5
+  #define ESP32_GPIO0       6  // Helpful for servers
+  #define SPIWIFI          SPI
+#endif
+
 
 #include "arduino_secrets.h" 
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h
@@ -38,9 +48,6 @@ void setup() {
     ; // wait for serial port to connect. Needed for native USB port only
   }
 
-  // Set up the pins!
-  WiFi.setPins(SPIWIFI_SS, SPIWIFI_ACK, ESP32_RESETN, ESP32_GPIO0, &SPIWIFI);
-
   // check for the WiFi module:
   WiFi.setPins(SPIWIFI_SS, SPIWIFI_ACK, ESP32_RESETN, ESP32_GPIO0, &SPIWIFI);
   if (WiFi.status() == WL_NO_MODULE) {

examples/WiFiWebServer/pin_config.h

@@ -1,48 +0,0 @@
-// Configure the pins used for the ESP32 connection
-#if defined(ADAFRUIT_FEATHER_M4_EXPRESS) || \
-  defined(ADAFRUIT_FEATHER_M0) || \
-  defined(ADAFRUIT_FEATHER_M0_EXPRESS) || \
-  defined(ARDUINO_AVR_FEATHER32U4) || \
-  defined(ARDUINO_NRF52840_FEATHER) || \
-  defined(ADAFRUIT_ITSYBITSY_M0) || \
-  defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) || \
-  defined(ARDUINO_AVR_ITSYBITSY32U4_3V) || \
-  defined(ARDUINO_NRF52_ITSYBITSY)
-  // Configure the pins used for the ESP32 connection
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    13   // Chip select pin
-  #define ESP32_RESETN  12   // Reset pin
-  #define SPIWIFI_ACK   11   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_ADAFRUIT_FRUITJAM_RP2350)
-  #define SPIWIFI       SPI1  // The SPI port
-  #define SPIWIFI_SS    46   // Chip select pin
-  #define ESP32_RESETN  22   // Reset pin
-  #define SPIWIFI_ACK    3   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_AVR_FEATHER328P)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     4   // Chip select pin
-  #define ESP32_RESETN   3   // Reset pin
-  #define SPIWIFI_ACK    2   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(TEENSYDUINO)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS     5   // Chip select pin
-  #define ESP32_RESETN   6   // Reset pin
-  #define SPIWIFI_ACK    9   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif defined(ARDUINO_NRF52832_FEATHER)
-  #define SPIWIFI       SPI  // The SPI port
-  #define SPIWIFI_SS    16   // Chip select pin
-  #define ESP32_RESETN  15   // Reset pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_GPIO0   -1
-#elif !defined(SPIWIFI_SS)   // if the wifi definition isnt in the board variant
-  // Don't change the names of these #define's! they match the variant ones
-  #define SPIWIFI       SPI
-  #define SPIWIFI_SS    10   // Chip select pin
-  #define SPIWIFI_ACK    7   // a.k.a BUSY or READY pin
-  #define ESP32_RESETN   5   // Reset pin
-  #define ESP32_GPIO0   -1   // Not connected
-#endif