* Update of supported SoCs
Changed ESP32-S3 support to stable.
* Update getting_started.rst
Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com>
* Added support for Cytron Maker Feather AIoT S3.
* 1. Select OPI PSRAM by default.
2. Fixed pin name error in variant.cpp.
3. Added definition for RGB_BUILTIN.
* Define the RGB_BUILTIN as shown in #6979.
* Added pin definition for A12 (Vin Sense).
The HID semaphore allows USBHID::SendReport() to wait for the completion of
report sending.
With a zero timeout xSemaphoreTake() after calling tud_hid_n_report(),
occasionally, the following would happening:
1. USBHID::SendReport() would send a report by calling tud_hid_n_report().
2. The send would complete and (presumably on another thread)
tud_hid_report_complete_cb() would be called and it would xSemaphoreGive()
the semaphore.
3. In USBHID::SendReport(), the zero timeout xSemaphoreTake(sem, 0) would
succeed, taking the semaphore.
4. On the next line, xSemaphoreTake(sem, timeout_ms ...) would timeout
because the semaphore was already taken by the previous line of code.
The result would be waiting timeout_ms for no reason.
The purpose of the zero timeout xSemaphoreTake() is to clear the semaphore in
case a previous SendReport() timed out waiting for the semaphore. In that case,
tud_hid_report_complete_cb() may be called after the timeout, giving the
semaphore. Then the next SendReport() would start with the semaphore given,
which isn't desired if we want to call xSemaphoreTake(sem, timeout_ms ...) on
it.
There have also been other cases where tud_hid_report_complete_cb() is called
an extra time, causing the same situation.
The fix is to move the zero timeout xSemaphoreTake() before the call to
tud_hid_n_report(). This eliminates the race between the zero timeout
xSemaphoreTake() and tud_hid_report_complete_cb() in the common case when no
timeout occurs.
There is still a possible race condition between the zero timeout
xSemaphoreTake() and tud_hid_report_complete_cb() in the case of a timeout,
but that should be rarer.
Issue: Serial data sent during frequency change is corrupted.
Fixes corrupt debug message by printing the message after the frequency change is completed.
* Changes UART ISR to only trigger on RX FIFO Full and timeout
* changes initial RX timeout
* Eliminates extra testing for _uart != NULL
* reconfiguration with "uartSetFastReading()"
* Adds new function "uartSetFastReading()"
* changed default onReceive() behaviour
* forces User callback in case of error
* Error Code Order
Set NO_ERROR as first error code, same as ESP_OK = 0
* Initial commit with guide on building libs wirh higher debug level
* Added reference to FAQ
* Reword portion of core_debug.rst
* Removed extra empty line
Co-authored-by: Vojtěch Bartoška <76958047+VojtechBartoska@users.noreply.github.com>
Arduino-esp32 2.0.4 was released with a version of TinyUSB hid_device.h
that uses uint16_t for the last argument:
https://github.com/espressif/arduino-esp32/blob/2.0.4/tools/sdk/esp32s2/include/arduino_tinyusb/tinyusb/src/class/hid/hid_device.h
TU_ATTR_WEAK void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len);
But USBHID implements this callback with uint8_t:
https://github.com/espressif/arduino-esp32/blob/2.0.4/libraries/USB/src/USBHID.cpp
void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len){
if (tinyusb_hid_device_input_sem) {
xSemaphoreGive(tinyusb_hid_device_input_sem);
}
}
The result is that when USBHIDKeyboard sends a report to the host, it
times out, waiting 100 ms for the callback to be called. It does this
once for pressing the key and once for releasing the key, so
100 ms * 2 = 200 ms.
The latest version of hid_device.h reverts the last argument to uint8_t:
860b104691/tools/sdk/esp32s2/include/arduino_tinyusb/tinyusb/src/class/hid/hid_device.h
TU_ATTR_WEAK void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len );
But these commits suggest that the last argument will eventually be
changed to uint16_t:
556b5d5044
change report len in hid API from uint8_t to uint16_t
since HS interrupt endpoint can be up to 1024, 8-bit is not enough.
affected APIs are:
- tud_hid_n_report() / tud_hid_report()
- tud_hid_report_complete_cb()
b495d6f8ec
temporarily revert len back to uint8_t in tud_hid_report_complete_cb() for up coming release
To prevent this from becoming broken again, in preparation for the change
to uint16_t, make USBHID resilient to any type for the last argument for
tud_hid_report_complete_cb() by using some C++ template metaprogramming,
adapted from https://stackoverflow.com/a/22632571.
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Removed option to change CHANNEL
* Revert "Removed option to change CHANNEL"
This reverts commit b2ec27de1d2d4703a15f6397550a46896413828a.
* Fixed the ability to change CHANNEL
* WiFi scan only on selected channel
This update includes the following:
- Implemented an additional build step that produces an adjusted bootloader image with updated headers
according to selected flash mode and size values. This step is only executed for debugging or uploading
via debug probes.
- Implemented a basic mechanism to dynamically add an extra UF2 bootloader image if corresponding
partition is selected (e.g. for Adafruit targets)
- Minor code formatting
* Compile error if CONFIG_FREERTOS_HZ != 1000
* add a check at the CMake level, per feedback
* Set CONFIG_FREERTOS_HZ=1000 in CI test of Arduino-as-component
somehow had duplicated the same name across all my boards. the PID's and VID's were correct, but the name was the same for all of them. that is fixed now.
* Update esptool to version 4.2.1
* Fix esptool for MacOS
* Esptool v4.2.1 for CI Platformio (#7147)
to complete the test.
Co-authored-by: Jason2866 <24528715+Jason2866@users.noreply.github.com>
This change enables picking the right board configuration from the
variants/ folder. Previously, we would always pick the default
configuration (e.g., "esp32" instead of "heltec_wifi_lora_32_V2").
* Added NVS test sketch + test script
* Added cfg.json with multiple fqbns
* cfg.json missing commas fix
* Changed OPI PSRAM to QSPI accordind to new HW setup.
* disabled PSRAM for ESP32S3
* Reverting PSRAM changes
* Remove Octal flash test
Octal flash needs to be tested locally before each release.
