Fixed#7406 . The "reason2str" macro in WiFiGeneric.cpp tries to read memory from index "-1" in "system_event_reasons" array when handling STA_DISCONNECTED event with reason 0. Dealing with reason 0 as a reason 1 (WIFI_REASON_UNSPECIFIED) will solve the problem (the reason for this event to arrive with reason 0 is unknown). #7406
The original code assumes 100Hz FreeRTOS tick rate and just supplies vTaskDelay with the assumed number of ticks required for the wanted delay. This patch simply fixes it to use portTICK_PERIOD_MS, thereby working correctly regardless of what tick rate FreeRTOS has been configured to run at.
The HID semaphore allows USBHID::SendReport() to wait for the completion of
report sending.
With a zero timeout xSemaphoreTake() after calling tud_hid_n_report(),
occasionally, the following would happening:
1. USBHID::SendReport() would send a report by calling tud_hid_n_report().
2. The send would complete and (presumably on another thread)
tud_hid_report_complete_cb() would be called and it would xSemaphoreGive()
the semaphore.
3. In USBHID::SendReport(), the zero timeout xSemaphoreTake(sem, 0) would
succeed, taking the semaphore.
4. On the next line, xSemaphoreTake(sem, timeout_ms ...) would timeout
because the semaphore was already taken by the previous line of code.
The result would be waiting timeout_ms for no reason.
The purpose of the zero timeout xSemaphoreTake() is to clear the semaphore in
case a previous SendReport() timed out waiting for the semaphore. In that case,
tud_hid_report_complete_cb() may be called after the timeout, giving the
semaphore. Then the next SendReport() would start with the semaphore given,
which isn't desired if we want to call xSemaphoreTake(sem, timeout_ms ...) on
it.
There have also been other cases where tud_hid_report_complete_cb() is called
an extra time, causing the same situation.
The fix is to move the zero timeout xSemaphoreTake() before the call to
tud_hid_n_report(). This eliminates the race between the zero timeout
xSemaphoreTake() and tud_hid_report_complete_cb() in the common case when no
timeout occurs.
There is still a possible race condition between the zero timeout
xSemaphoreTake() and tud_hid_report_complete_cb() in the case of a timeout,
but that should be rarer.
Arduino-esp32 2.0.4 was released with a version of TinyUSB hid_device.h
that uses uint16_t for the last argument:
https://github.com/espressif/arduino-esp32/blob/2.0.4/tools/sdk/esp32s2/include/arduino_tinyusb/tinyusb/src/class/hid/hid_device.h
TU_ATTR_WEAK void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len);
But USBHID implements this callback with uint8_t:
https://github.com/espressif/arduino-esp32/blob/2.0.4/libraries/USB/src/USBHID.cpp
void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len){
if (tinyusb_hid_device_input_sem) {
xSemaphoreGive(tinyusb_hid_device_input_sem);
}
}
The result is that when USBHIDKeyboard sends a report to the host, it
times out, waiting 100 ms for the callback to be called. It does this
once for pressing the key and once for releasing the key, so
100 ms * 2 = 200 ms.
The latest version of hid_device.h reverts the last argument to uint8_t:
860b104691/tools/sdk/esp32s2/include/arduino_tinyusb/tinyusb/src/class/hid/hid_device.h
TU_ATTR_WEAK void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len );
But these commits suggest that the last argument will eventually be
changed to uint16_t:
556b5d5044
change report len in hid API from uint8_t to uint16_t
since HS interrupt endpoint can be up to 1024, 8-bit is not enough.
affected APIs are:
- tud_hid_n_report() / tud_hid_report()
- tud_hid_report_complete_cb()
b495d6f8ec
temporarily revert len back to uint8_t in tud_hid_report_complete_cb() for up coming release
To prevent this from becoming broken again, in preparation for the change
to uint16_t, make USBHID resilient to any type for the last argument for
tud_hid_report_complete_cb() by using some C++ template metaprogramming,
adapted from https://stackoverflow.com/a/22632571.
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Removed option to change CHANNEL
* Revert "Removed option to change CHANNEL"
This reverts commit b2ec27de1d2d4703a15f6397550a46896413828a.
* Fixed the ability to change CHANNEL
* WiFi scan only on selected channel
otherwise the compiler will complain about unused variable event
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Improve RGB LED Driver
Replaces the use of the `LED_BUILTIN` variable by creating a new variable called `RGB_BUILTIN`. On boards with both a regular LED and RGB LED, this change provides functionality to control either LED.
The `LED_BRIGHTNESS` variable is changed to `RGB_BRIGHTNESS`, which aligns more closely with the `RGB_BUILTIN` variable name.
`BOARD_HAS_NEOPIXEL` is no longer necessary; it is replaced by `RGB_BUILTIN`.
* Update BlinkRGB example
Update example code for changes with the RGB driver:
- Replace `LED_BUILTIN` and `BOARD_HAS_NEOPIXEL` with `RGB_BUILTIN`
- Replace `LED_BRIGHTNESS` with `RGB_BRIGHTNESS`
* Update board variants
Update board variants for changes with the RGB driver:
- Remove `BOARD_HAS_NEOPIXEL`
- Define `RGB_BUILTIN` pin
- Replace `LED_BRIGHTNESS` with `RGB_BRIGHTNESS` to align with `RGB_BUILTIN` name
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Vojtěch Bartoška <76958047+VojtechBartoska@users.noreply.github.com>
With recent compiler update, the following warning is generated:
packages/esp32/hardware/esp32/2.0.4/libraries/LittleFS/src/LittleFS.cpp:85:5: warning: missing initializer for member 'esp_vfs_littlefs_conf_t::dont_mount' [-Wmissing-field-initializers]
This commit adds the missing identifier.
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Added definitions for various parameters and UI types.
* Overload for `const char*` added.
* Function `addValidStrList` added.
This is needed for mode parameters (see example RMakerCustomAirCooler.ino).
* Example of a custom device that uses toggle, mode and range parameters.
* Revert: Added definitions for various parameters and UI types.
* Fixed declaration for addValidStrList
* Fixed missing gpio definition for ESP32C3 target
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Description of Change
Original code does not work (crashing) - related issue #6832 - now fixed.
Extended description to be more helpful.
Added options to modify the setup at the top of the code via constants.
Added option do plot with Arduino Serial plotter.
Even if the crashing was solved alone the ledc PWM would not output any signal.
Tests scenarios
Tested on ESP32 with oscilloscope and signal generator.
Related links
Closing #6832
Fixed issue with ssl_client->socket being closed without being consistently set to -1. Changed close to lwip_close to be consistent with lwip_socket, resolved issue with long term assert after 4+ days (assert failed: lock_release_generic locks.c:186).
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Description of Change
This PR fixes an issue related to BLE Server and Descriptors.
The issue:
If the BLE Server code changes its own descriptors, it is not reflected in the GATTS database.
BLE2902 CCCD also didn't reflect any changes to the GATTS database.
Because of this issue, the client could never read the real Descriptor values from the remote Server.
Tests scenarios
Tested with ESP32.
Related links
Fixes#6863Fixes#6868
* Initial implementation of RGB driver via digitalWrite
* Moved constants to pins_arduino.h
* Changed pin definition + added example
* Wrapped BlinkRGB in #ifdef BOARD_HAS_NEOPIXEL
* Removed forgotten log from example
* Moved RGBLedWrite to new file esp32-hal-rgb-led and created pinMode in variatn.cpp
* Updated example - lowered single channel brightness to LED_BRIGHTNESS
* Changed function name from RGBLedWrite to neopixelWrite + code polishing
* Moved pinSetup portion related to RGB back to common file
- Created new temporary variable, stopping confusion with the reuse of "error". As Wire.requestFrom() doesn't return an error.
- Added a cast to help clarify when and why bytes are being read
When building the core with `-Wextra` a few locations have `case:`
fall throughs or skipped field initializers.
Add proper comments for B64 cases to avoid GCC warnings
Initialized unused fields in Tone and WiFiGeneric to avoid missing
field initializer warnings.
````
2022-05-19T17:40:42.2280300Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c: In function 'base64_decode_block_signed':
2022-05-19T17:40:42.2282122Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:42:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2283247Z *plainchar = (fragment & 0x03f) << 2;
2022-05-19T17:40:42.2284240Z ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2285087Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:43:7: note: here
2022-05-19T17:40:42.2285435Z case step_b:
2022-05-19T17:40:42.2285691Z ^~~~
2022-05-19T17:40:42.2286515Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:53:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2286932Z *plainchar = (fragment & 0x00f) << 4;
2022-05-19T17:40:42.2287219Z ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2287609Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:54:7: note: here
2022-05-19T17:40:42.2287909Z case step_c:
2022-05-19T17:40:42.2288200Z ^~~~
2022-05-19T17:40:42.2288972Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:64:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2289491Z *plainchar = (fragment & 0x003) << 6;
2022-05-19T17:40:42.2289745Z ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2290162Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:65:7: note: here
2022-05-19T17:40:42.2290509Z case step_d:
2022-05-19T17:40:42.2290714Z ^~~~
2022-05-19T17:40:42.2482744Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c: In function 'base64_encode_block':
2022-05-19T17:40:42.2484713Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:46:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2485415Z result = (fragment & 0x003) << 4;
2022-05-19T17:40:42.2486713Z ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2487696Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:47:9: note: here
2022-05-19T17:40:42.2488519Z case step_B:
2022-05-19T17:40:42.2489175Z ^~~~
2022-05-19T17:40:42.2492458Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:56:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2493351Z result = (fragment & 0x00f) << 2;
2022-05-19T17:40:42.2494227Z ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2496324Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:57:9: note: here
2022-05-19T17:40:42.2496937Z case step_C:
2022-05-19T17:40:42.2497261Z ^~~~
2022-05-19T17:40:44.6354962Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp: In function 'void setToneChannel(uint8_t)':
2022-05-19T17:40:44.6356417Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:99:5: warning: missing initializer for member 'tone_msg_t::pin' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6357120Z };
2022-05-19T17:40:44.6358732Z ^
2022-05-19T17:40:44.6364470Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:99:5: warning: missing initializer for member 'tone_msg_t::frequency' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6367914Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:99:5: warning: missing initializer for member 'tone_msg_t::duration' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6372875Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp: In function 'void noTone(uint8_t)':
2022-05-19T17:40:44.6373943Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:110:5: warning: missing initializer for member 'tone_msg_t::frequency' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6375154Z };
2022-05-19T17:40:44.6375825Z ^
2022-05-19T17:40:44.6379852Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:110:5: warning: missing initializer for member 'tone_msg_t::duration' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6383291Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:110:5: warning: missing initializer for member 'tone_msg_t::channel' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6388688Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp: In function 'void tone(uint8_t, unsigned int, long unsigned int)':
2022-05-19T17:40:44.6389829Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:128:5: warning: missing initializer for member 'tone_msg_t::channel' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6390677Z };
2022-05-19T17:40:44.6391420Z ^
2022-05-19T17:42:00.6768353Z /home/runner/arduino_ide/hardware/espressif/esp32/libraries/WiFi/src/WiFiGeneric.cpp: In static member function 'static bool WiFiGenericClass::setDualAntennaConfig(uint8_t, uint8_t, wifi_rx_ant_t, wifi_tx_ant_t)':
2022-05-19T17:42:00.6769293Z /home/runner/arduino_ide/hardware/espressif/esp32/libraries/WiFi/src/WiFiGeneric.cpp:1333:5: warning: missing initializer for member 'wifi_ant_config_t::rx_ant_default' [-Wmissing-field-initializers]
2022-05-19T17:42:00.6769658Z };
2022-05-19T17:42:00.6769824Z ^
````
add a comment to make it clear, since platformIO still creating the `spiffs.bin` for filesystem image. The file name `spiffs.bin` is so much CONFUSING! it makes the user fill the LittleFS creating is fail.
Better allocate the buffer for f_mkfs from the heap otherwise the stack requirement of this library is huge due to a work buffer allocated for f_mkfs in sdcard_mount. The work buffer is only needed if argument format_if_empty is set true (which is by default false).
This change is quite important if you plan to use this library in a task. as now it increased the tasks stacks size by 4k, even this memory is never used if users are not aware of the large stack requirement during init this library may have other variables on stack that would have written memory outsides its range which can cause various side effects.
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
The internal _isRemoteAddressSet variable is set to true
when calling connect() functions. If connecting fails _isRemoteAddressSet
needs to be re-set to false, otherwise other functions, such as
discover() will fail without clear error messages.
Summary
Added compiler.warning_flags to all chips in platform.txt to reflect users setting of warning level output during compilation (set up in Arduino IDE preferences)
Impact
When a warning is set to none the compilation will no longer display warnings
Related links
Solves issue #6118
Description of Change
Fixes IPAddress INADDR_NONE declaration when using Arduino WiFi or ETH.
This symbol was defined as 0xffffffff by lwip /inet.h, making it impossible to use INADDR_NONE correctly.
This PR only works when <wifi-provisioning/wifi_config.h> has a modification to include <lwip/ip4_addr.h> instead of <lwip/inet.h>. This will be done directly to the sdk folder in the github structure and it has been fixed in IDF by a separated Merge Request. This will be reflected in the future, for good.
Tests scenarios
This PR was tested with all Arduino WiFi examples, including AsyncUDP. Also with ETH examples.
It was also tested for #6610 test cases.
Testing done for ESP32, ESP32-S2, ESP32-C3 and ESP32-S3.
Related links
fixes#6610fixes#6247fixes#4732
Added options to WiFi STA for connect:
- setMinSecurity: default WIFI_AUTH_WPA2_PSK
- setScanMethod: default WIFI_FAST_SCAN
- setSortMethod: default WIFI_CONNECT_AP_BY_SIGNAL (required all channels scan method)
Added parameters for SSID and BSSID to WiFi.scanNetworks()
Fixes: #6485
Fixes: Any issue about WiFi connecting slower now than in 1.0.x
Private Key. Issue presented during any subsequent invocation of loadCACert, loadCertificate, and
loadPrivateKey, respectively, after the first invocation.
* Revert "Edited VFSFileImpl::read to use both read/fread (#6456)"
This reverts commit 7b89b39e10.
* Added default file buffer size + function to change it by user
Also support ESP_IDF_VERSION_MAJOR > 3
Fixes#6458
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* Fixes USB CDC setRxBufferSize(), begin(), _onRX()
* Fixes SetRxBufferSize(0) with end()
* Fixes reset when 2x call to end()
* Adds RX_OVERFLOW_EVENT and Queue Copy in setBufferSize
* changed event name to ARDUINO_USB_CDC_RX_OVERFLOW_EVENT
Summary
The examples demonstrate how to create a WPA2 Enterprise connection, but it requires using various direct esp_idf functions. This patch is intended to create another overloaded version of the WiFi.begin() function that allows a user to create a WPA2 Enterprise connection in much the same way as different kinds of connections.
My only question for the core maintainers is whether I should leave those #ifdef's in there. I added them so that it was easy to disable all the code I added via defines from my platformio.ini file, but they technically aren't necessary.
Impact
This should make it easier for novice users to create WPA2 Enterprise connections. For my university, I didn't need a root certificate or the client certificate or client key, so I haven't been able to debug those scenarios, but I built the begin functions to allow any one of those to be used, if needed.
I can confirm that eduroam-style WPA2 Enterprise networks that only require authentication with a username and password works as expected.
In my project I'm getting the error
```
In file included from lib/Discovery/Discovery.cpp:2:
C:/Users/David/.platformio/packages/framework-arduinoespressif32/libraries/AsyncUDP/src/AsyncUDP.h:47:1: error: expected class-name before '{' token
```
Adding a reference to Stream.h fixes it.
* Added dual antenna for WiFi (based on the ESP32-WROOM-DA module)
* Fixed build error
* Fixed indentation and renamed function to setDualAntennaConfig
* Added the RX and TX selection modes as configuration
* Mode code optimization
Summary
Touch Sensor refactoring to be based on IDF 4.4.
Adds support to ESP32S2 and future ESP32S3.
Adds some new APIs:
For all chips:
void touchAttachInterruptArg(uint8_t pin, void (*userFunc)(void*), void *arg, uint32_t threshold);
This function allows the user to add and pass a void* parameter to the ISR user callback.
void touchDetachInterrupt(uint8_t pin);
This function detaches ISR call back for the touch pad pin.
Only ESP32 chip
void touchInterruptSetThresholdDirection(bool mustbeLower);
This function allows the user to set if the ISR callback will be activated when the touch sensor readings are lower or higher than the threshold defined. See example TouchButton.ino.
Only ESP32-S2 and ESP32-S3 chips
bool touchInterruptGetLastStatus(uint8_t pin);
This function reports if the touch pad pin is touched or untouched. It can be used with ISR to identify when it is touched and untouched (released). See example TouchButtonV2.ino.
Impact
None. ll original APIs and examples now run on ESP32 and ESP32-S2.
Related links
Fix#6095Fix#6034Fix#5799Fix#5745Fix#5527Fix#5493Fix#4321Fix#4044Fix#2722Fix#2625
CaptivePortal.ino example did randomly crash for me ... so I start investigate ;-)
Decoding stack results
0x4016faea: WiFiUDP::write(unsigned char const*, unsigned int) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\libraries\WiFi\src\WiFiUdp.cpp line 201
0x400d4a4a: DNSServer::replyWithIP() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 187
0x400d4d01: DNSServer::processNextRequest() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 117
0x400d3e81: loop() at D:\Drive\Dokumente\HTL_Lehrer\2021_22\Projekte\Stromzaehler_Patrick\arduino/arduino.ino line 1078
0x400dd545: loopTask(void*) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\cores\esp32\main.cpp line 37
0x4008a0de: vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/port.c line 143
I found with wireshark a possibility to trigger the crash on demand is:
nslookup 3.1o1osr0092ons87rp375p1pq8q066o8p56or1sqsps6rs17r4384q9748qr1r52.699p1r741q737393648s29917o45p16q50rn517rnsp73pp68p1q259s92693qp.s607408539s0p06p7559os0899866344r7qq7rpns960o9576q65.r5n94r5so9784pq1.i.03.s.sophosxl.net
The problem was that QNameLength is a signed byte and therefore its not possible to count up to 255. Additionally we need 256 bytes for the QName string to accommodate for the zero termination.
With LittleFS the `fs.exists(path)` returns true also on folders. A `isDirectory()` call is required to set _isFile to false on directories.
This enables serving all files from a folder like : `server->serveStatic("/", LittleFS, "/", cacheHeader.c_str());
File f = fs.open(path);
_isFile = (f && (! f.isDirectory()));
Reliability fix for autoReconnect when assoc_fail, autoReconnect did not work before for these failures.
Changes behavior of WIFI_REASON_ASSOC_FAIL event when autoReconnect is set, removes WIFI_REASON_ASSOC_FAIL/WL_CONNECT_FAILED so retry waitforconnectresult loop stays active for the retry, was not working before.
* change parameter to signed int
As of wrong paramater, the following problem existed, that will be fixed now with this change.
BTScanResultsSet.cpp:67:8: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (i < 0)
* Change parameter and variable to int
As of wrong paramater, the following problem existed, that will be fixed now with this change.
BTScanResultsSet.cpp:67:8: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (i < 0)
* Revert "Examples update, add a note for configTime() that only one ntp server is supported by lwip",
fixed in espressif/esp32-arduino-lib-builder#51
This reverts commit 6b1020967a171c549b3d956825fd0d395de9cce0.
* SimpleTime: add NTPoDHCP option and TimeZone env variable
Summary
This PR is refactoring of SigmaDelta HAL in order to use IDF instead of current Register manipulation approach.
Impact
Change in API:
uint32_t sigmaDeltaSetup(uint8_t channel, uint32_t freq);
changed to -->
uint32_t sigmaDeltaSetup(uint8_t pin, uint8_t channel, uint32_t freq);
void sigmaDeltaAttachPin(uint8_t pin); removed, no longer needed. Pin is attached in sigmaDeltaSetup()
Summary
RMT HAL refactoring based on IDF.
Impact
Improves RMT by adding IDF v4.4 support.
Receiving RMT can handle any size of data.
rmtInit() has a new parameter - RxBufferSize - to hold any number of data when receiving RMT.
rmtWrite() has a new parameter - wait_tx_done - to block writing until sending all data.
Related links
fix#5905
23 Braille Display Page (0x41)
Braille display allow visually impaired computer users to read out text using raised pins. The pins are electro-mechanically
activated. These devices also have support for controls that help navigate the computer screen. Typically, braille displays
interface with software known as a screen reader in order to perform this navigation.
## Summary
Arduino ```setup()``` and ```loop()``` run under a Task with a fixed Stack size of 8KB.
Users may want to change this size.
This PR adds this possibility by just adding a line of code, as for example:
``` dart
ESP_LOOP_TASK_STACK_SIZE(16384);
void setup() {
}
void loop() {
}
```
## Impact
None. It adds a new functionality to ESP32 Arduino.
If ```ESP_LOOP_TASK_STACK_SIZE(newSize);``` is not declared/used, it will compile the sketch with the default stack size of 8KB.
## Related links
fix#6010https://github.com/espressif/arduino-esp32/issues/6010#issuecomment-992701658
Thanks @igrr for the suggestion!
* Refactoring function headers
Changing the header so the main TwoWire::requestFrom() definition uses a `size_t` instead of a `uint8_t`, removing the 255 bytes limit on I2C requests.
Co-authored-by: Flaviu Tamas <me@flaviutamas.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* using ksz8081 only from ESP-IDF 4.4 onwards
The previous assertion only considerate the existance of ESP-IDF 4.3, but with the ESP-IDF 4.3.1 release this assertion would generate errors. Now only includes from ESP-IDF 4.4 onwards.
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Current implementation clears _headers when request was sent. If the
user added custom request headers, they will be lost and the redirected
request will not contain them. This commit changes the scope of cleanup
so that the headers survive redirects but don't survive connection
reuse.
1.0.6 changed scanning method to always scan all available channels during connect. This results in results in connect taking about ~3 seconds instead of ~1. This patch changes the behavior to use WIFI_FAST_SCAN if client used a specific channel.
Summary
Only affects ETH (not WiFi)
This PR solves #5733 by allowing the DHCP IDF server to complete its tasks and only then it sets a static IP.
This also solves another related failure reported in this issue (#5733 (comment)).
fix#5733
Impact
Adds a delay in order to wait for DHCP to actually terminate before setting the static IP configuration in ETH.
When using the FTM examples I got an error in the FTM_Initiator.ino:
*"wifi:channel=0 is invalid"*
I solved it for myself by simply passing the channel argument to be 1 in *WiFi.initiateFTM*. However, a better fix would be to directly change the default channel here.
* examples: WiFi and Ethernet examples organization
* examples: Change on CI scripts to include new folder
* Library name reverted to WiFi
* examples: WiFi and Ethernet examples organization in a new folder
* examples: Eth files moved from WiFi to Ethernet lib and CMakeLists updated
The client always appends "Basic" to the authorization header, however there are other auth schemes that can be used: https://developer.mozilla.org/en-US/docs/Web/HTTP/Authentication
For example "Bearer" when using OAuth.
This PR adds a `setAuthorizationType` method to the HTTPClient which allows this scheme to be configured by the caller. Authorization type is set to "Basic" by default so this will have no impact on existing usecases.
This adds a function to WiFiClientSecure to set the ALPN protocol.
This is required for an MQTT client to connect to AWS IoT when using an AWS Custom Authorizer, as described here.
Example code snippet:
...
WiFiClientSecure wiFiClient;
// ALPN protocol, needed with AWS custom authorizer
const char *aws_protos[] = {"mqtt", NULL};
void setup() {
wiFiClient.setCACert(AWSCAPEM);
wiFiClient.setAlpnProtocols(aws_protos);
}
...
Summary
Related to the issue #5773 and #2280.
_user_defined_size is removed from EEPROMClass because it is redundant in the current code
EEPROMClass::length() returns _size that is the true available size of EEPROM
Impact
_user_defined_size is removed from EEPROMClass
EEPROMClass::length() returns _size that is the true available size of EEPROM
Summary
Modifies WiFi lib to allow dynamic buffer allocation along with SPIRAM MALLOC enabled
This gives more heap space to the users
Related PR in Arduino Lib Builder: espressif/esp32-arduino-lib-builder#47
Impact
WiFi will work the same as it was in version 1.0.6, restoring free heap.
close#5630close#5474close#5699close#5697
* SPI.h add new call to return a SS pin number used.
As code example states, the SS pin needs to be explicitly set for output for SPI to work, but the pin number have to be coded in addition to the SPI logic in the library, which means this duplicates code. It is much better to just be able to get the pin number from library itself.
* Update SPI_Multiple_Buses.ino to use new pinSS method
Simplify the example case, to show usage of pinSS method. This also simplifies the example, removing duplicated code.
Summary
New feature: Add the ability to get the peer certificate of an SSL connectio. This is useful for IoT when the root/cert trust chain has a shorter lifecylce than the device itself. Includes example code.
It adds two methods to the WiFiClientSecure client:
bool getFingerprintSHA256( uint8_t fingerprint_remote_sha256[32]) -- return true and the fingerprint (i.e. the SHA256 of the raw x509 as a DER - identical to what you see in for example your webbrowser). Or false on error.
const mbedtls_x509_crt* getPeerCertificate(); -- return the actual X509 struct or NULL on error.
Impact
No impact; backwards compatible (only adds to the API)
When compiling with verbose logging, the build would error with a message saying `len` is not defined in `tud_vendor_rx_cb()`. This change fixes the error.
* SD.open() new feature for creating all folders in path
This PR adds to the SD.open() function option to create all folders to the file.
SD.open(const char* path, const char* mode, const bool create)
Default value of create is false.
When true folders are created.
From issue #5019
* Update vfs_api.cpp
memccpy -> memcpy
* SD_MMC deinit fix
Wrong deinit function was called.
* Fix build compilation due to changes in the HW_TIMER's structs
* Fix compilation warnings and errors with USB
* Update USBCDC.cpp
* Update CMakeLists.txt
* Update HWCDC.cpp
* Implement Thread-Safe I2C based on ESP-IDF API
* Update esp32-hal.h
* use proper types for size and timeout
* Allow disabling of the HAL locks
* Limit frequency settings to prevent Interrupt WDT
* SD.open() new feature for creating all folders in path
This PR adds to the SD.open() function option to create all folders to the file.
SD.open(const char* path, const char* mode, const bool create)
Default value of create is false.
When true folders are created.
From issue #5019
* Update vfs_api.cpp
memccpy -> memcpy
* File f = open() edit
added false for create
* SDMMC frequency selection based on board type
On Olimex ESP32 EVB I/O operations with SD card can cause error when LAN is used in same time.
Problem is disappearing if SD MMC frequency lower down from SDMMC_FREQ_HIGHSPEED to SDMMC_FREQ_DEFAULT.
No problem if WiFi used instead LAN.
* Code rewritten according to https://github.com/espressif/arduino-esp32/pull/5688#pullrequestreview-759359645
esp_eth_phy_new_ksz8081 was added in IDF after version 4.3 and generates a compilation error with IDF-4.3. This change will only use esp_eth_phy_new_ksz8081 for IDF versions after 4.3
Fixes: https://github.com/espressif/arduino-esp32/issues/5573
To reproduce:
1. Run any sample code that starts a BLE server, and does not call `setCallbacks`.
2. Connect to the device using the "LightBlue" app on iOS.
3. Observe crash shown in the issue linked above.
* Fix issue #5507 "Constructor WebServer::WebServer(IPAddress addr, int port) produces an unexpected result"
"The class Webserver is declared with two explicit constructors, one with signature:
WebServer::WebServer(IPAddress addr, int port)
Using this results in a server listening on the port number obtained by converting the value of the IPAddress addr argument (in host byte order) to a uint32_t and then to a uint16_t, which is manifestly not the result that would be expected.
...
As for a fix, we can assume from these results that this constructor is not being used and therefore could simply be deleted."
* Issue 5507
Reverse changes in commit bee1e7088cef913391155f096b42cd4bb89c5c6f after discussion.
Alternative fix to be done.
* Fix issue #5507 "Constructor WebServer::WebServer(IPAddress addr, int port) produces an unexpected result"
This change adds support for multi-homed servers to libraries/WiFi. It was assumed to be there already by libraries/WebServer, but was not.
This led to unexpected results when the IP address-specific constructor of class WebServer was used (see issue 5507).
This change was tested using three concurrent instances of WebServer, one bound to the WiFi station address, one bound to the WiFi soft AP address,
and one bound to INADDR_ANY. See libraries/WebServer/examples/MultiHomedServers for the test method.
* Fix issue #5507 "Constructor WebServer::WebServer(IPAddress addr, int port) produces an unexpected result" (cont.)
This fixes what I think might be the cause of CI failures on GitHub for the previous commit, namely the absence of an include file
in examples/MultiHomedServers.
* Fix issue #5507 "Constructor WebServer::WebServer(IPAddress addr, int port) produces an unexpected result" (cont.)
Change port numbers in examples/MultiHomedServers per pull-request comment from me-no-dev ...
"for this test to be valid, both servers should be on the same port. That is how you can make sure that the functionality works."
"Using a Core Debug Level of Verbose and the WebServer serveStatic() function with the default value of nullptr for its cache_header argument, results in a LoadProhibited exception in _svfprintf_r().
This is because serveStatic() calls log_v() with cache_header corresponding to a "%s" in its format but without checking that cache_header is not nullptr, and then logv() (indirectly) calls _svfprintf_r().
On the other hand, with a Core Debug Level other than Verbose, this does not occur."
Changed serveStatic() to the check value of cache_header and if it is nullptr, instead pass an empty string to log_v().
* Add initial support for USB MSC
* Add Firmware Upload/Download With MSC
Current running firmware is available as file inside the MSC Disk. To update the firmware on the ESP, just copy a regular firmware bin into the drive
* Support overwriting of the firmware file
Overwriting a file is done totally differently on MacOS, Windows and Linux. This change supports it on all of them.
* Allow CDC, FirmwareMSC and DFU to be enabled on boot
* Add example ESP32-S2 USB-ONLY board
* Various device code optimizations
Added `end()` methods to MSC classes
Made begin() methods safe to be called multiple times
Optimized CDC class
* Fix CDC Connect/Disconnect detection in Arduino IDE on Windows
* Rework cdc_write
* Update ESP32-S2 board configs
## The problem
WiFiClient's connect method variant where no timeout is passed can block esp32 MCU and may then cause watchdog to kick in and reset the device. This behavior is different from that, what is in arduino-esp8266 core.
## Summary
Some cross-esp libraries (working both on esp32 and 8266), like PubSubClient simply call connect method on WiFiClient, to get connected to remote server. However, connect behavior varies betwen esp arduino 8266 and esp arduino 32 cores. This pull request tries introduce same behavior - to make connect method non-blocking on esp32, like it is with 8266 arduino core.
## Proposed solution
Introduce default fixed timeout that can be changed by #define - by default set to 3 seconds.
### Affected components:
WiFiClient
### Affected methods:
```c++
int connect(IPAddress ip, uint16_t port);
int connect(const char *host, uint16_t port);
```
### Impact
May impact projects or libraries using connect method variant without specified timeout, where:
- remote is located far away or
- connection is heavily limited, or
- remote is slow, when it comes to accept the connection
In [HTTPClient](https://github.com/espressif/arduino-esp32/tree/master/libraries/HTTPClient), if the `Transfer-Encoding` header is set to `identity`, an error (Transfer-Encoding not supported) will occur.
HTTPClient will consider the request as `identity` if the `Transfer-Encoding` header is not set. But it is also defined a response with `identity` explicitly set in the `Transfer-Encoding` header (ref:[MDN Web Docs](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Transfer-Encoding)).
This pull request will allow the request to be processed normally even when `identity` is explicitly set.
lwip lib bundled with esp32 Arduino supports only one ntp server. Any additional servers set are just silently ignored.
This default is different from esp8266 Arduino core and very confusing. Most of the examples provided uses 3 different ntp servers for redundancy while only the first one is used actually.
Addressing issue #4964
Closes#5398
Using the same non-blocking socket connect pattern for respecting connection timeout, copied from WiFiClient::connect.
WiFiClient::connect uses lwip_connect_r, whereas start_ssl_client uses lwip_connect. I haven't found what is the difference between them. I tested both, both work ok, so I kept lwip_connect.
* Fix compile archive arguments for the new toolchain
* Add menu to S2 for picking through which port to upload
Internal USB CDC requires to reset and wait for the new port (because persistence is not yet stable)
* USB CDC should also be started in main
* Fix URL and USB version for WebUSB
* Update vendor callback API
* Update CDC::write to use TX_DONE semaphore
* Update USB_Serial example
A typographical error is corrected in the 2nd line of the comment.
From = " This is un example howto use Touch Intrrerupts "
To = " This is an example of how to use Touch Intrrerupts "
* Update toolchain
* Update package_esp32_index.template.json
* add optional component dependencies after Kconfig options are known (#5404)
Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were
used in conditions preceding idf_component_register to determine which
components need to be added to `arduino` component requirements.
However the Kconfig options aren't known at the early expansion stage,
when the component CMakeLists.txt files are expanded the first time
and requirements are evaluated. So all the conditions evaluated as if
the options were not set.
This commit changes the logic to only add these components as
dependencies when the Kconfig options are known. Dependencies become
"weak", which means that if one of the components isn't included into
the build for some reason, it is not added as a dependency.
This may happen, for example, if the component is not present in the
`components` directory or is excluded by setting `COMPONENTS` variable
in the project CMakeLists.txt file.
This also ensures that if the component is not present, it will not be
added as a dependency, and this will allow the build to proceed.
Follow-up to https://github.com/espressif/arduino-esp32/pull/5391.
Closes https://github.com/espressif/arduino-esp32/issues/5319.
* IDF master d93887f9f
* PlatformIO updates for CI (#5387)
* Update PlatformIO CI build script
- Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3
- Use PlatformIO from master branch for better robustness
* Update package.json for PlatformIO
Co-authored-by: Ivan Grokhotkov <ivan@espressif.com>
Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
Commit d15e1b0e [1] in the 2.0.0 pull request #4996 introduced a filter
to connect only to WiFi networks with a RSSI of -75 or better. This
results in strage behaviour, as a scan still shows networks, that can't
be connected to, even though with older versions, connecting to those
networks was possible and the connection (albeit slow) was stable.
Remove the RSSI filter for now by setting the threshold to -127, i.e.
the lowest possible value. Maybe in the future the filter threshold
could be exposed to users, to allow filtering out nearly unreachable
networks.
[1] github.com/espressif/arduino-esp32/pull/4996/commits/d15e1b0
When iterating through APlist from first to the last element, a corrected password for already known SSID is not used. Therefore, I propose to iterate from the back of the list. With iterating from the back through the vector, an already known SSID with a corrected password is used instead.
Proposed fix to #4627 as a remediation to PR #3995#3995 introduced that a device detected on BLE would not be entered in vector if a callback has been defined.
By doing so, it was not possible anymore to have a counter in a call back (AND device in vector) to limit the number of detected device in a single scan, which could crash ESP32 as a result.
* add onMtuChanged to BLEServerCallbacks
Add method onMtuChanged to the BLEServerCallbacks so the application can be notified if the MTU size changes.
* Correct missing semicolon and misspelled method.
Correct missing semicolon and misspelled method.
Thi may happen if read() gets called repeatedly (such as in HttpClient to parse response headers) and the connection is closed unexpectedly or the remote peer may have unexpected behavior that causes the underlying socket to report an error. In that case read() itself calls stop(), which invalidates the receive buffer object. Then when read() is called again without checking, such as inside readStringUntil(), the _rxBuffer is null and ESP32 crashes.
Pull request #4999 added setMTU function to BLEClient.cpp/.h, this line provides implementation of this added functionality to the BLE client example to resolve cases in which data from notifyCallback exceeds 20 characters (3 bytes for command type and attribute ID, 20 bytes for attribute data (char*)pData).
Added new BLE5 features to use on C3/S3 family:
extended scan,
extended/multi advertising
New code is not fancy (no feedback from events), but i think it is functional. To get feedback from events i am suggesting to use custom GAP callback, which is already implemented in BLEDevice.
- Use Serial.print instead of log_i for QR code helper information,
so that it is always printed by default.
- Expose the RainMaker factory reset and wifi reset APIs.
- Simplify example to have only a Switch device. Create another example for custom device.
- Enable push button based Factory reset and Wi-Fi reset.
- Added support for the TimeZone service.
- Moved API doc to RainMaker library's top level README.
- Other minor doc changes.
Hey guys,
so I wanted to do a BtClassic Discovery without the need to call connect
and to list all found devices on a display and continue work with that list.
I wasn't capable to test the example code with my file structure, but I did use the discovery already in some different situations.
However when I noted that the Bluedroid stack won't let me enforce an RfComm SPP connection to a GPS Device (Skytraxx 2 plus, I guess its interface is built so simple that it doesn't advertise its SPP over SDP), I will probably have to switch to BtStack (BlueKitchen) and stop on this side meanwhile
The current implementation has a getMTU function which returns the mtu sent in a message.
This function allows you to set the MTU value on the connected device, it first sets the MTU locally by calling esp_ble_gatt_set_local_mtu. It then calls esp_ble_gattc_send_mtu_req to have the connected device also change its MTU size.
This adds support for the KSZ8081 ethernet phy.
Only the IDF 4+ specific code is modified, as the phy support was only
added recently:
espressif/esp-idf@aecfbf96
This is very much still work in progress and much more will change before the final 2.0.0
Some APIs have changed. New libraries have been added. LittleFS included.
Co-authored-by: Seon Rozenblum <seonr@3sprockets.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Mike Dunston <m_dunston@comcast.net>
Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com>
Co-authored-by: Seon Rozenblum <seonr@3sprockets.com>
Co-authored-by: microDev <70126934+microDev1@users.noreply.github.com>
Co-authored-by: tobozo <tobozo@users.noreply.github.com>
Co-authored-by: bobobo1618 <bobobo1618@users.noreply.github.com>
Co-authored-by: lorol <lorolouis@gmail.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Limor "Ladyada" Fried <limor@ladyada.net>
Co-authored-by: Sweety <switi.mhaiske@espressif.com>
Co-authored-by: Loick MAHIEUX <loick111@gmail.com>
Co-authored-by: Larry Bernstone <lbernstone@gmail.com>
Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
Co-authored-by: 快乐的我531 <2302004040@qq.com>
Co-authored-by: chegewara <imperiaonline4@gmail.com>
Co-authored-by: Clemens Kirchgatterer <clemens@1541.org>
Co-authored-by: Aron Rubin <aronrubin@gmail.com>
Co-authored-by: Pete Lewis <601236+lewispg228@users.noreply.github.com>
This enables customizing HTTP headers which adds some extra flexibility.
This does not break anything of course because this change introduces a new constructor with a new additional HTTPClient argument for HTTPUpdate class.
In some use cases getting rssi signal from one channel is more stable (less variance) than rssi from the three advertising channels.
This change allows you to specify which channels are used to advertise.
In case you have multiple APs with the same SSID/password and WiFi.begin(ssid, pwd) is called, ESP32 defaults to connect to THE FIRST AP FOUND matching ssid - according to:
https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/network/esp_wifi.html#_CPPv418wifi_scan_method_t
This can cause situations that ESP32 is trying to connect to AP which is far away from it (weak signal) even there is AP close to it, just as in my house - I have AP on channel 6 which is in the 1st floor (quite far from room where I do the programming) and AP on channel 13 in the same room I do the programming (which is in the 2nd floor) - result: ESP32 is trying to connect to the AP on channel 6 because it finds it first and never try the AP on channel 13 in the same room, result of this is very unreliable WiFi connection.
When scan_method is set to WIFI_ALL_CHANNEL_SCAN, ESP32 scans all channels and choose the nearest / strongest AP (matching the ssid of course) as expected - result is no connection problems at all.
Therefore I propose adding this parameter into WiFi.begin, connection problems as described above are quite confusing (especially for beginners), I can imagine that for example Schools there are usually using mutliple APs and this can cause intermittent connection problems without obvious reason.
Fixes: #4884
* Use HTTP method table from ESP-IDF's nghttp
* Parse methods using IDF's HTTP method list
* Make example's loops to allow the CPU to switch tasks
- File might not eval to false if opened with write/append and SD is gone
- Allow card to be formatted if FAT partition was not found
- Mark card as gone in certain situations
- Fix several logic errors in low level SD API
mbedTLS requires repeated calls to mbedtls_ssl_write() whenever it returns MBEDTLS_ERR_SSL_WANT_READ or MBEDTLS_ERR_SSL_WANT_WRITE. this happens when the client sends data faster then the server or the connection can handle.
- Remove client from the list of devices in case registration fails
- Filter other events not related to registration during registration phase
- Cleanup if connect fails
- Reset if after disconnect
- Disconnect callback *after* cleanup is done so object can be deleted
This fixes some of the issues I had like:
- `BLEClient::connect` hangs up and never recovered because registration failed
- `BLEClient` could not be deleted after disconnect or deletion creating ghost events https://github.com/espressif/arduino-esp32/issues/4047
- `BLEClient` could not be properly reused after a connection was attempted (successful or not)
* Cleanup in case of registration and connect failure.
Cleanup before calling disconnect callback for safe delete.
Reject other events during registration.
Adresses #4047, #4055
* Clear if after unregister #4047
fixes#4596
* Prevent possible undefined behaviour by get methods not taking an index as parameter
* Add methods to get the count of service data UUIDs and service UUIDs
* Various code improvements
* Speed up upload by a factor of 17
Uploads are very slow because of an unnecessary "client.connected()" check in _uploadReadByte().
Here is what happens:
client.connected() is called for every byte read. WiFiClient::connected() calls recv(fd(), &dummy, 0, MSG_DONTWAIT); which takes a relatively long time, so the optimized path of returning a buffered byte via client.read() is effectively nullified.
Removing the one line changed the upload speed for a 2 MB file (discarding the received data) from 22 KB/sec (before) to 367 KB/sec (after).
The change is safe in the face of disconnects because client.read(), when it no longer has buffered data, calls (WiFiClient) fillBuffer(), which calls recv(), so the disconnection will be detected in due course.
* Move disconnect check into the timeout loop
Compiler complains on unused parameter pCharacteristicMap:
framework-arduinoespressif32\libraries\BLE\src\BLERemoteService.cpp: In member function 'void BLERemoteService::getCharacteristics(std::map<short unsigned int, BLERemoteCharacteristic*>*)':
\framework-arduinoespressif32\libraries\BLE\src\BLERemoteService.cpp:246:89: warning: parameter 'pCharacteristicMap' set but not used [-Wunused-but-set-parameter]
void BLERemoteService::getCharacteristics(std::map<uint16_t, BLERemoteCharacteristic*>* pCharacteristicMap) {
See #3960 for more details of the problem and the solution. I only implemented what was proposed in this ticket, as it solves my problem, which was the same as in this ticket. Credits for the code going to @etrinh ;-)
This also is a more consistence behaviour compared to esp8266, where it also is possible to restart the wifiserver immediately on the same port.
* fix typo in WiFiMulti
* clean up trailing spaces
* clean up script file used in cleaning
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* improve & fix BLEScan when too many BLE devices
- when wantDuplicates, no need to check duplicate and no more insert into vector
- delete advertisedDevice when not insert into vector, fix memory leak
- add showParse when you just want raw advertised data
Remove device from Peer list if connection fails.
Only call onConnect callback if connection was successful.
Only call onDisconnect callback if the connection was previously connected (ESP_GATTC_DISCONNECT_EVT is fired on a unsuccessful connection attempt also).
Resolves a number of issues with phantom events and callbacks being fired.
::addPeerDevice and ::removePeerDevice are called with m_appId, so should ::updatePeerDevice as all use the same parameter for the underlying map's key.
* Fix for issue #4158: Crash with stack trace originating in Bluedroid
Improved configuration of scan response data in 'BLEAdvertising' avoids the crash:
- Added member variable 'm_scanRespData' to configure scan response differently from advertising data
- Initialization of 'm_scanRespData' in BLEAdvertising constructor
- Use of 'm_scanRespData' within BLEAdvertising::start() to configure the scan response
- 'Flags' and 'Appearance' are cleared in the scan response data
- With this fix, device names of up to 29 characters can be used without causing a crash.
Fixes: #3460
This code has been run in production for 1 month and it looks stable, no data dropped and it definitely fixes the issue described. I think that this can be merged to avoid using custom package referencing in PlatformIO that has been used in quite a few projects for now.
Co-authored-by: Ivan Golubic <ivan@mvt-solutions.com>
The UpdateClass in the Updater component has the ability to update data to
a SPIFFS partition. It selects the first available partition using the
ESP-IDF esp_partition_find_first() function.
That behaviour is problematic if one has multiple SPIFFS partitions.
This change allows a user to pass the label argument (defaults to NULL)
to UpdateClass::begin() so a specific SPIFFS partition can be updated.
Additionally, ArduinoOTA can set this partition label using the
new method ArduinoOTAClass::setPartitionLabel which is optional.
This change does not break compatibility.
* Add partition label argument to SPIFFSSPIFFS currently assumes there is only ever one partition.This change allows a user to pass the label argument (defaults to NULL)to SPIFFS::begin() so a specific SPIFFS partition can be referenced.This change does not break compatibility.
* BLERemoteChar: fix descriptor 2902 write for characteristic notifications
When registering a notification on a characteristic, the 2902 descriptor
(CCCD) value is set to 1 (or 2 for indication).
According to the BLUETOOTH CORE SPECIFICATION Version 5.2, Revision Date
2019-12-31, section 4.12.3 "Write Characteristic Descriptors" (page 1588),
the characteristic descriptor write must expect a response.
Currently, the descriptor write is performed without expecting a reponse,
which prevents the notification to be functional with some BLE stacks.
This commit modify the write to expect the response.
Signed-off-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>
* BLERemoteChar: forward GATT client event to characteristic descriptors
This commits prevents a permanent wait when calling BLERemoteDescriptor
readValue function, on the m_semaphoreReadDescrEvt semaphore.
ESP32 BLE stack calls to remote characteristic
- notification,
- value read
- value write
and remote characteristic descriptor
- value read
are asynchronous.
When such a call is performed by this library, a semaphore is taken prior
to the BLE stack read or write operation, and waited on after it.
Releasing the semaphore is done by the characteristic event handling
function (gattClientEventHandler), when the appropriate event is received.
However, the characteristic descriptor events are discarded, and the
value read semaphore is never released.
This commits forwards the GATT client events from the remote
characteristic down to their remote characteristic descriptor, and
implements their event handling.
Adding a semaphore for the remote characteristic descriptor value write
will be done in a separate commit.
Signed-off-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>
* BLERemoteDescriptor: add semaphore to characteristic descriptor write
This adds a semaphore to characteristic descriptor value write, to mimic
the value read function, and to ensure completion of the operation before
we carry on.
Signed-off-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>
Co-authored-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>
