otherwise the compiler will complain about unused variable event
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Improve RGB LED Driver
Replaces the use of the `LED_BUILTIN` variable by creating a new variable called `RGB_BUILTIN`. On boards with both a regular LED and RGB LED, this change provides functionality to control either LED.
The `LED_BRIGHTNESS` variable is changed to `RGB_BRIGHTNESS`, which aligns more closely with the `RGB_BUILTIN` variable name.
`BOARD_HAS_NEOPIXEL` is no longer necessary; it is replaced by `RGB_BUILTIN`.
* Update BlinkRGB example
Update example code for changes with the RGB driver:
- Replace `LED_BUILTIN` and `BOARD_HAS_NEOPIXEL` with `RGB_BUILTIN`
- Replace `LED_BRIGHTNESS` with `RGB_BRIGHTNESS`
* Update board variants
Update board variants for changes with the RGB driver:
- Remove `BOARD_HAS_NEOPIXEL`
- Define `RGB_BUILTIN` pin
- Replace `LED_BRIGHTNESS` with `RGB_BRIGHTNESS` to align with `RGB_BUILTIN` name
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Vojtěch Bartoška <76958047+VojtechBartoska@users.noreply.github.com>
With recent compiler update, the following warning is generated:
packages/esp32/hardware/esp32/2.0.4/libraries/LittleFS/src/LittleFS.cpp:85:5: warning: missing initializer for member 'esp_vfs_littlefs_conf_t::dont_mount' [-Wmissing-field-initializers]
This commit adds the missing identifier.
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Added definitions for various parameters and UI types.
* Overload for `const char*` added.
* Function `addValidStrList` added.
This is needed for mode parameters (see example RMakerCustomAirCooler.ino).
* Example of a custom device that uses toggle, mode and range parameters.
* Revert: Added definitions for various parameters and UI types.
* Fixed declaration for addValidStrList
* Fixed missing gpio definition for ESP32C3 target
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Description of Change
Original code does not work (crashing) - related issue #6832 - now fixed.
Extended description to be more helpful.
Added options to modify the setup at the top of the code via constants.
Added option do plot with Arduino Serial plotter.
Even if the crashing was solved alone the ledc PWM would not output any signal.
Tests scenarios
Tested on ESP32 with oscilloscope and signal generator.
Related links
Closing #6832
Fixed issue with ssl_client->socket being closed without being consistently set to -1. Changed close to lwip_close to be consistent with lwip_socket, resolved issue with long term assert after 4+ days (assert failed: lock_release_generic locks.c:186).
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Description of Change
This PR fixes an issue related to BLE Server and Descriptors.
The issue:
If the BLE Server code changes its own descriptors, it is not reflected in the GATTS database.
BLE2902 CCCD also didn't reflect any changes to the GATTS database.
Because of this issue, the client could never read the real Descriptor values from the remote Server.
Tests scenarios
Tested with ESP32.
Related links
Fixes#6863Fixes#6868
* Initial implementation of RGB driver via digitalWrite
* Moved constants to pins_arduino.h
* Changed pin definition + added example
* Wrapped BlinkRGB in #ifdef BOARD_HAS_NEOPIXEL
* Removed forgotten log from example
* Moved RGBLedWrite to new file esp32-hal-rgb-led and created pinMode in variatn.cpp
* Updated example - lowered single channel brightness to LED_BRIGHTNESS
* Changed function name from RGBLedWrite to neopixelWrite + code polishing
* Moved pinSetup portion related to RGB back to common file
- Created new temporary variable, stopping confusion with the reuse of "error". As Wire.requestFrom() doesn't return an error.
- Added a cast to help clarify when and why bytes are being read
When building the core with `-Wextra` a few locations have `case:`
fall throughs or skipped field initializers.
Add proper comments for B64 cases to avoid GCC warnings
Initialized unused fields in Tone and WiFiGeneric to avoid missing
field initializer warnings.
````
2022-05-19T17:40:42.2280300Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c: In function 'base64_decode_block_signed':
2022-05-19T17:40:42.2282122Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:42:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2283247Z *plainchar = (fragment & 0x03f) << 2;
2022-05-19T17:40:42.2284240Z ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2285087Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:43:7: note: here
2022-05-19T17:40:42.2285435Z case step_b:
2022-05-19T17:40:42.2285691Z ^~~~
2022-05-19T17:40:42.2286515Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:53:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2286932Z *plainchar = (fragment & 0x00f) << 4;
2022-05-19T17:40:42.2287219Z ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2287609Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:54:7: note: here
2022-05-19T17:40:42.2287909Z case step_c:
2022-05-19T17:40:42.2288200Z ^~~~
2022-05-19T17:40:42.2288972Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:64:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2289491Z *plainchar = (fragment & 0x003) << 6;
2022-05-19T17:40:42.2289745Z ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2290162Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:65:7: note: here
2022-05-19T17:40:42.2290509Z case step_d:
2022-05-19T17:40:42.2290714Z ^~~~
2022-05-19T17:40:42.2482744Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c: In function 'base64_encode_block':
2022-05-19T17:40:42.2484713Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:46:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2485415Z result = (fragment & 0x003) << 4;
2022-05-19T17:40:42.2486713Z ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2487696Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:47:9: note: here
2022-05-19T17:40:42.2488519Z case step_B:
2022-05-19T17:40:42.2489175Z ^~~~
2022-05-19T17:40:42.2492458Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:56:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2493351Z result = (fragment & 0x00f) << 2;
2022-05-19T17:40:42.2494227Z ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2496324Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:57:9: note: here
2022-05-19T17:40:42.2496937Z case step_C:
2022-05-19T17:40:42.2497261Z ^~~~
2022-05-19T17:40:44.6354962Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp: In function 'void setToneChannel(uint8_t)':
2022-05-19T17:40:44.6356417Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:99:5: warning: missing initializer for member 'tone_msg_t::pin' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6357120Z };
2022-05-19T17:40:44.6358732Z ^
2022-05-19T17:40:44.6364470Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:99:5: warning: missing initializer for member 'tone_msg_t::frequency' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6367914Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:99:5: warning: missing initializer for member 'tone_msg_t::duration' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6372875Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp: In function 'void noTone(uint8_t)':
2022-05-19T17:40:44.6373943Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:110:5: warning: missing initializer for member 'tone_msg_t::frequency' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6375154Z };
2022-05-19T17:40:44.6375825Z ^
2022-05-19T17:40:44.6379852Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:110:5: warning: missing initializer for member 'tone_msg_t::duration' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6383291Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:110:5: warning: missing initializer for member 'tone_msg_t::channel' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6388688Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp: In function 'void tone(uint8_t, unsigned int, long unsigned int)':
2022-05-19T17:40:44.6389829Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:128:5: warning: missing initializer for member 'tone_msg_t::channel' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6390677Z };
2022-05-19T17:40:44.6391420Z ^
2022-05-19T17:42:00.6768353Z /home/runner/arduino_ide/hardware/espressif/esp32/libraries/WiFi/src/WiFiGeneric.cpp: In static member function 'static bool WiFiGenericClass::setDualAntennaConfig(uint8_t, uint8_t, wifi_rx_ant_t, wifi_tx_ant_t)':
2022-05-19T17:42:00.6769293Z /home/runner/arduino_ide/hardware/espressif/esp32/libraries/WiFi/src/WiFiGeneric.cpp:1333:5: warning: missing initializer for member 'wifi_ant_config_t::rx_ant_default' [-Wmissing-field-initializers]
2022-05-19T17:42:00.6769658Z };
2022-05-19T17:42:00.6769824Z ^
````
add a comment to make it clear, since platformIO still creating the `spiffs.bin` for filesystem image. The file name `spiffs.bin` is so much CONFUSING! it makes the user fill the LittleFS creating is fail.
Better allocate the buffer for f_mkfs from the heap otherwise the stack requirement of this library is huge due to a work buffer allocated for f_mkfs in sdcard_mount. The work buffer is only needed if argument format_if_empty is set true (which is by default false).
This change is quite important if you plan to use this library in a task. as now it increased the tasks stacks size by 4k, even this memory is never used if users are not aware of the large stack requirement during init this library may have other variables on stack that would have written memory outsides its range which can cause various side effects.
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
The internal _isRemoteAddressSet variable is set to true
when calling connect() functions. If connecting fails _isRemoteAddressSet
needs to be re-set to false, otherwise other functions, such as
discover() will fail without clear error messages.
Summary
Added compiler.warning_flags to all chips in platform.txt to reflect users setting of warning level output during compilation (set up in Arduino IDE preferences)
Impact
When a warning is set to none the compilation will no longer display warnings
Related links
Solves issue #6118
Description of Change
Fixes IPAddress INADDR_NONE declaration when using Arduino WiFi or ETH.
This symbol was defined as 0xffffffff by lwip /inet.h, making it impossible to use INADDR_NONE correctly.
This PR only works when <wifi-provisioning/wifi_config.h> has a modification to include <lwip/ip4_addr.h> instead of <lwip/inet.h>. This will be done directly to the sdk folder in the github structure and it has been fixed in IDF by a separated Merge Request. This will be reflected in the future, for good.
Tests scenarios
This PR was tested with all Arduino WiFi examples, including AsyncUDP. Also with ETH examples.
It was also tested for #6610 test cases.
Testing done for ESP32, ESP32-S2, ESP32-C3 and ESP32-S3.
Related links
fixes#6610fixes#6247fixes#4732
Added options to WiFi STA for connect:
- setMinSecurity: default WIFI_AUTH_WPA2_PSK
- setScanMethod: default WIFI_FAST_SCAN
- setSortMethod: default WIFI_CONNECT_AP_BY_SIGNAL (required all channels scan method)
Added parameters for SSID and BSSID to WiFi.scanNetworks()
Fixes: #6485
Fixes: Any issue about WiFi connecting slower now than in 1.0.x
