* ci(json): Add support for checking sdkconfig before running tests
* docs(ci): Add explanation about requires field in JSON
* fix(json): Ignore comments when searching requirements
* feat(json): Add extended regex support to requires field
* change(json): Move to using requirements in JSON
* fix(json): Fix requirements for touch tests
* refactor(json): Fix formatting of JSON files
* fix(spi): Fix SPI example and JSON
* fix(esp32p4): Add missing touchpad definitions
* fix(esp32p4): Add missing target in SPI example
* fix(esp32p4): Start touch driver fix
* fix(esp32p4): Skip touch examples while it is not implemented
* fix(esp32p4): Add missing analog pin definitions
* refactor(formatting): Fix formatting that was broken in P4 PR
* fix(openthread): Add missing targets to skip
* fix(esp32p4): Skip ethernet sketches
* fix(esp32p4): Disable periman test while touch is not implemented
* fix(esp32p4): Disable touch test while touch is not implemented
* fix(esp32p4): Fix UART test
* fix(esp32p4): Skip Wi-Fi test
* fix(esp32): Skip unsupported example
* fix(esp32p4): Fix skip files
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(ledc): Allow attaching multiple pins to 1 channel
* feat(ledc): Add ledcWriteChannel function
* feat(ledc): Print info about already set channel
* docs(ledc): Add ledcWriteChannel function and attach update
* feat(ledc): Add example and fixes
* feat(ledc): Remove commented code
* feat(ledc): Fix missing new line at end of file
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(example): EXT0 and EXT1 wakeup
Fixes the Deep Sleep wakup example to run with IDF5.1. The API has changed and a adjustment was necessary.
* feat(wakeup): Use Macro for GPIO_NUM
Changed the example to use a #define for the RTC IO Pin (GPIO) used in the example.
* fix(typo): typo and commentaries
Fixes the commentary to the correct IDF terms.
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(libs): Add ESP-NOW Arduino library
* Update libraries/ESP_NOW/src/ESP32_NOW.cpp
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update libraries/ESP_NOW/src/ESP32_NOW.cpp
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* fix(esp-now): Add check if Wifi is started.
* Fix ESP_NOW_Serial
* Add ESP NOW Serial Example
* Add comment
* Skip esp-now example for esp32h2
* Add broadcast address constant
* Change return value to align with other APIs
* Apply suggested changes
* Improve example
* Fix example
* Improve serial example
* Add argument to receive callback to know if a message was broadcasted
* Update libraries/ESP_NOW/src/ESP32_NOW_Serial.cpp
* Simplify example
* Add broadcast example
* Change comments
* Change comment
* Improve broadcast master example
* Remove examples using IDF's API
* Fix example
* Add network example
* Add skip file
* Add LMK back
* Add logs
* Improve example
* Fix example
* Apply @suglider suggestions from code review
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Add documentation
* fix examples links in docs
* Apply @lucasssvaz suggestions to docs
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update espnow.rst
* Update examples
* make onSent optional and remove underscores for virtual functions
* Make onRecieve also optional and make constructor protected
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: me-no-dev <hristo@espressif.com>
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Create ESP_NetworkInterface class and have Ethernet extending it
* Update CMakeLists.txt
* Split networking from WiFi (H2 can now use Ethernet)
Now all libs have been checked yet. More to do on WiFi side
* Fix build errors
* Guard WiFi classes and fix RMII ETH examples
* Decouple network related libraries from WiFi
* Fix examples and WiFiUpdate
* Guard WiFiProv lib to compile only on WiFi chips
* Add periman string for network and "fix" mdns on the first ETH
* Revert back location of Client/Server/Udp in order to accept some PRs
* Fix periman
* Some fixes from merging master
* Fix web server missing fs.h
* Move Client, Server and Udp out of WiFi
* More fixes
* more fixes
* Fix CMakekLists and rework lib menu dependencies
* Fix CMake issues
* move back WiFiClient to rebase with master
* Update ETH_TLK110.ino
* Move back WiFiClient
* Update progress
* Update WiFiGeneric.cpp
* More fixes
* Switch AP to the new interface
* Cleanup
* Rename AP methods
* Add extra interface info for Printable
* Rename IPv6 getters to clarify that they are returning LinkLocal address
cc @sgryphon
* Rename network classes
cc @sgryphon
* Update NetworkManager.h
* Rename WiFi Server and UDP
* Rename WiFiClient and WiFiClientSecure
* Update CMakeLists.txt
* Update on-push.sh
* Rename Network library
* Remove unnecessary guard
* Get the correct interface MAC address for mDND Workstation service
* Apply suggestions from code review
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* feat: onReceiveExample.ino
Adds a new example that uses HardwareSerial::onReceive(). The example demosntrates how to read all the data sent to UART0, considering that the end of transmission is defined by a period of time with UART in idle state.
* fix: onReceiveExample.ino
Fixes typos
* feat: add explanation header
* fix: mutex release
* fix: add Mutex verification
* feat: Mutex error message
* feat: Mutex NULL testing
* feat(hwcdc): fix delay
Fixes delay when CDC is disconnected. At this time is only fixes it when USB cable is unplugged.
* feat(hwcdc): fix delay
fixes delay when CDC is not connected. It was only considering when the USB cable was not plugged.
* feat(hwcdc): add 2 methods
Adds 2 new methods:
- isPlugged() will return true when USB cable is plugged, false otherwise.
- isConnected() will return true when USB CDC is connected to a application in the USB Host side and communication is stablished.
* feat(hwcdc): adjusts APIs
Fixes the example to use the new added APIs for checking if USB cable is plugged and for checking if CDC is connected.
* fixes api declaration
* fixes API declaration
* feat(hw_cdc):fixes the hardware cdc jtag plugged/unplugged status
This will use a new IDF 5.1 feature to detect if the USB HW CDC is plugged or not. This can be checked testing HWCDCSerial.
It also fixes issues related to timeout or delays while writing to the HW Serial when USB is unplugged.
* feat(usb): Creates HWSerial_Events.ino example
* feat: adds .skip.esp32
Skips the ESP32 SoC test given that it has no USB
* feat: adds .skip.esp32s2
Skips the ESP32S2 because it has no HW CDC JTAG interface
* fix: fixes issues with Ubuntu CI
Only compiles the example in case it is using Hardware CD and JTAG mode.
* feat(serialcdc): non block functions
modifies write and flush to do not clock in case CDC host is not connected to the CDC client from the C3/S3/C6/H2
* fix(HWCDC): changes made demands testing for CDC ON BOOT
* feat(hwcdc): Improves HWSerial_Events.ino
Improves the example by adding more information about USB being plugged and CDC being connected.
* feat(hwcdc): solves CDC connection issue
Detects correctly when CDC is or not connected.
Deals with USB unplugged while the sketch is printing to CDD.
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Apply suggestions from code review
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* fix(esp32): 🐛 Fixed "Invalid mbox" in the Wi-Fi example
* fix: changes the code to actually connect to the WiFi in roder to get time and date
* fix: removing call to WiFi.begin() at the end of the sketch. It must be called at first.
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* RMT (featt): adds a new function to set EOT level after RMT writing
* RMT (feat): adds new feature to set the EOT level after writing RMT channel
* adds return value to rmtSetEOT()
* adds bool return to rmtSetEOT()
* adds return value to the rmtSetEOT() function
* FIX (rmt): fixes eot_level setting using flags in the TX structure
* RMT(feat): Create RMT_EndOfTransmissionState.ino example
* Update cores/esp32/esp32-hal-rmt.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Update cores/esp32/esp32-hal-rmt.c
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Update cores/esp32/esp32-hal-rmt.c
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* First stab ad simplyfing webserver auth and adding a handler.
* Tweaks after testing against docs and latest Library tree
* Add documentatin for callback handler
* Bodge to allow things to compile without the dependencies
* Remove dependency on sodium to make it compile with 4.4
* Fix hex conversion
* Move some common HEX functions into a static HEX class, remove those from MD5 and add some examples. This allows for the cleanup of various to/from HEX routines elsewhere.
* Remove some duplicated code
* Add simplfiied HEXBuilder under MD5Bulder to CMakefile.
* Update for 3.0.0 and QoL improvements
* Remove examples that depend on external libraries
* Skip H2 testing
* Formatting improvements
* Move builders examples to Utilities folder
* Fix indentation
* Add HashBuilder abstract class
* Add SHA1Builder
* Fix comment
* Fix whitespace
* Fix crashes and improve log messages
* Fix indentation for webserver
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Added Serial as RS485 interface demo
* Added more detail to initial comment
* Switched to UART_MODE definitions from uart_types.h in order to accomodate some versions of Arduino core
* Update libraries/ESP32/examples/Serial/RS485_Echo_Demo/RS485_Echo_Demo.ino
Co-authored-by: Lucas Saavedra Vaz <lucassvaz@yahoo.com.br>
* Update libraries/ESP32/examples/Serial/RS485_Echo_Demo/RS485_Echo_Demo.ino
Co-authored-by: Lucas Saavedra Vaz <lucassvaz@yahoo.com.br>
* Update libraries/ESP32/examples/Serial/RS485_Echo_Demo/RS485_Echo_Demo.ino
Co-authored-by: Lucas Saavedra Vaz <lucassvaz@yahoo.com.br>
* Removed HardwareSerial.h include. Switched RTS pin to GPIO 4 for broader compatability.
* using 115200 for UART0 - console
---------
Co-authored-by: Lucas Saavedra Vaz <lucassvaz@yahoo.com.br>
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Example sketch prints MAC for different interfaces
Interfaces described in documenation: https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/misc_system_api.html#mac-address
* Update README.md to include 'MacAddress'
* Add files via upload
* Delete libraries/ESP32/examples/MacAddress/GetMacAddress.ino
* Delete libraries/ESP32/examples/MacAddress/GetMacAddress/GetMacAddress.ino
* Delete libraries/ESP32/examples/MacAddress/GetMacAddress/MacAddress directory
* Add files via upload
* Add files via upload
* Adds necessary MAC header file
* Reverting - moving to the sketch
* Adds include with esp_mac_type_t values
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* improve neopixel definition for all boards
* Improve NeoPixel definition for all boards
* neopixelWrite uses Peirpheral Manager now
The function can now be used for many GPIOs in the same sketch by using Peripheral Manager attach/detach, not being necesary to worry about initialization.
* improve error message
* check if pin is RGB_BUILTIN
* fixes boards that don't RGB_BUILTIN
* Serial as a #define
* Typo
* fixes USBCDC declaration
* Fixes Examples
* simplifies examples
* Adds USB Serial Events
* adds error msg when ESP32 is used with USB
* [I2S][SR] Add new I2S library and Sound Recognition support
* periman + TDM and PDM support
* separated init function + default values for pins
* fix SR example
* fix init functions
* remove old I2S from CmakeList
* Add ESP_I2S and ESP_SR to Cmakelist includedirs
* TDM slot_mask fix
* Peripheral manager pin check fix
* Compile ESP_SR Arduino code only if ESP-SR is available as component
* Guard I2S modes, depending on what is supported by the chip
* add check if i2s is supported
* Remove old I2S Example
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Adds Analog Continuous mode API
* fix when stopping/starting ADC data are not complete
* Added example
* fix size check
* update frequency in example
* set buffer to NULL if error occurs
* add docs
* set buffer to null on error
* fix example
* update docs
* fix example
* change return value to bool type
* updated adc modes description in docs
* Add empty line at the end of sketch
* Initial changes to compile under ESP-IDF v5.1
* Initial import for ESP-IDF v5.1 libs
* Update toolchain
* Update esp32-hal-psram.c
* Add missing LDs
* Update platform.txt
* Stop some CI jobs, because they will always fail
* Fix examples
* Update app_httpd.cpp
* Update ResetReason.ino
* Warnings fixes
* Added the example guideline and template (#7665)
* Added the example guideline and template
* PR review changes with some typos and grammar fixes
* Changes according to the PR review
* Added ESP32-S3 link to the datasheet (#7738)
* Update HiFreq_ADC.ino
* Replace periph_ctrl.h use because of deprecation
* Replace esp_spi_flash.h use because of deprecation
* Add includes to male mDNS::enableWorkstation compile
* Fix ssl_client mbedtls_pk_parse_key callback
* Update temperature sensor driver
* Allow sketch_utils to compile with arduino-cli
* Run CI with arduino-cli
* Fix arduino-cli CI build on Windows
* Refactor platform.txt to not use components installed through the board manager when running from git
* Initial Peripheral Manager Implementation
* Update SigmaDelta driver to use the new ESP-IDF driver API
* Small improvements to peripheral manager and SigmaDelta
* Remove deleted function from SigmaDelta header
* Update DAC driver to use the new ESP-IDF driver API
* Adds softAp(String) to make it compatible with ESP8266 (#7801)
* Fix commentary (#7800)
Minor fix based on observation done in https://github.com/espressif/arduino-esp32/issues/7795#issuecomment-1416868611
* add adafruit new board feather esp32s2 reserve tft (#7794)
* bugfix: add <stdint.h> for uint8_t to avoid compilation failure (GCC 11.2.0) (#7744)
* Adding 3rd party boards for VALTRACK-V4-VTS-ESP32-C3 & VALTRACK-V4-MFW-ESP32-C3 (#7735)
* Added VALTRACK-V4-VTS-ESP32-C3 board definition
Created pins_arduino.h & made changes to boards.txt with necessary changes
* Modified the URL
* Renamed json
* renamed all auRL
* Adding VALTRACK-V4 series board definitions
Added VALTRACK-V4-VTS-ESP32C3 & VALTRACK-V4-MFW-ESP32-C3 board variants
* Adding VALTRACK-V4 series board definitions
Added VALTRACK-V4-VTS-ESP32C3 & VALTRACK-V4-MFW-ESP32-C3 board variants
* Reverted package_esp32_index.template.json
restored package_esp32_index.template.json from edits
* Reverted package_esp32_index.template.json
Added new line to package_esp32_index.template.json
* Update Platformio CI (#7725)
* WiFiClient example fix (#7711)
* Modified WiFiClient example to use thingspeak instead of non-functionig sparkfun
* Moved instructions to README
* Fixed spelling
* Added link to S3 datasheet
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Mirror update from Heltec repository (#7709)
Heltec updated the I2C pins in b10f4bf85d
* Fixes BLE data printing (#7699)
* Fixes BLE data printing
BLE data has no '\0' terminator, therefore it can't be printed as a regular C string.
This fix just prints the BLE data based on its length.
* Simplify printing to a single call
* split menu options + lora_32_V3 fix (#7697)
* Change header gaurd name (#7696)
* Fix Name (#7691)
Wrong name in definitions.
* Fix error in WiFiClient.cpp where the connect function fails for timeouts below 1 second (#7686)
* Update WiFiClient.cpp
This change will allow specifying connect timeouts below 1 second. Without this change, if connect timeouts under 1 second are given, the connect defaults to 0ms and fails.
This will also allow timeouts in fractions of seconds, e.g. 1500ms. Without this change, connect timeouts are truncated to full second increments.
* Make parameter timeout_ms clear
* Change connection timeout_ms name for clarity
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* fixed the function header (#7674)
* fixed the function header
* fixed function name and paramaters
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Ticker fix solving #6155 (#7664)
* Wrapped Ticker functions with #pragma disabling -Wcast-function-type
* Revert "Wrapped Ticker functions with #pragma disabling -Wcast-function-type"
This reverts commit 160be7e67a10d01b6e44c4bf2521c0ccd6348976.
* Fixed Ticker example
* Modified Ticker example
* Fixed LED_BUILTIN err for ESP32
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* setPins fix ESP32 "specified pins are not supported by this chip." (#7646)
[ESP32: SDMMCFS::begin hardcodes the usage of slot 1, only check if the pins match slot 1 pins.]
setPins() was testing pins D1, D2 and D3 all against D1 ... fine in 1 pin mode when all are -1 not so much if you're trying to get 4 pin mode working.
I now see this function doesn't really do anything on the ESP32...accept now correctly checks that you are trying to use the slot 1 pins.
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Allow passing IP as connect method parameter in WiFiClientSecure and skip unnecessary host-ip conversions (#7643)
* Add LED_BUILTIN* definitions and initialization for LEDs to stop them floating. (#7636)
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Expand path to tinuf2 image when checking existence in platformio-build.py (#7631)
* Expand path to tinuf2 image when checking existence
* More isFiles fixed
* Remove (useless) trailing semicolon from Print.cpp (#7622)
* ADD: New variant Edgebox-ESP-100 (#7771)
* ADD: New variant Edgebox-ESP-100
* FIX: Edgebox-ESP-100 Board.txt usb mode option change back to default value as ESP32S3
* Add Crabik Slot ESP32-S3 board (#7790)
* Added Crabik Slot ESP32-S3
* Adding CPU frequency settings and removing excess from partition scheme settings
* new variant LilyGO T-Display-S3 (#7763)
* new variant LilyGO T-Display-S3
https://github.com/Xinyuan-LilyGO/T-Display-S3
* Add boards.txt definition
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* Update get.py to support Apple ARM64
* Update package_esp32_index.template.json
* WString Return bool (#7774)
* Add Roboheart Hercules development board to the esp32-core (#7672)
* added Roboheart Hercules pin definitions and board.txt entries
* added package_roboheat.json for prototyping
* Roboheart Hercules pins
* Updated the pins
* Delete package_roboheart.json
* Requested changes
---------
Co-authored-by: renebohne <rene.bohne@gmail.com>
* Reword "ESP-IDF as Component" (#7812)
I think "Arduino as an ESP-IDF component" or just "As ESP-IDF component" instead of "ESP-IDF as Component" is more correct way to name the link.
1. "ESP-IDF as Component" would imply that ESP-IDF is some sort of library for Arduino, which is (IMO) misleading, because it's true the other way around.
2. It's written as "Arduino as an ESP-IDF component" on the webpage it points to as well.
- Also I removed the capitalization from "Component" as I have not found a reason why is it capitalized.
* add new board Adafruit Feather ESP32-S3 Reverse TFT (#7811)
* Multi threading examples (tasks, queues, semaphores, mutexes) (#7660)
* Moved and renamed example ESP32/FreeRTOS to MultiThreading/BasicMultiThreading
* Added dummy files
* Modified original example
* Fixed BasicMultiThreading.ino
* Added Example demonstrating use of queues
* Extended info in BasicMultiThreading
* Renamed Queues to singular Queue
* Added Mutex example
* Added Semaphore example
* Moved info from example to README
* Moved doc from Mutex to README
* Added Queue README
* Removed unecesary text
* Fixed grammar
* Increased stack size for Sempahore example
* Added headers into .ino files
* Added word Example at the end of title in README
* removed unused line
* Added forgotten README
* Modified BasicMultiThreading example
* Added missing S3 entry in README
* moved location
* Update ESP-IDF libs
* Update CMakeLists.txt
* Update esptool to v4.4
* Add function timerAttachInterruptFlag (#7809)
* Update esptool to v4.5
* ADC refactoring (#7827)
* Adc refactored + periman implementation
Peripheral manager still needs to be checked if the implementation is right.
* switched to working solution for milivolts read
* Periman detachbus fix
* coding style
* fix CI warnings
* fix FreeRTOS example
* Update ETH.cpp
* Update FunctionalInterruptStruct.ino
* Update package_esp32_index.template.json
* Update package_esp32_index.template.json
* Fixes for the latest IDF v5.1
* update esp-idf libs and toolchain
* Turn OFF auto crystal frequency for ESP32 (needed by TWAI)
* Update examples
* Switch build to mostly use flags from files
Includes can not be done this way
* Reorganize flag files
* Optimize chip build flags further
* Revert defines from file. MBEDTLS_CONFIG_FILE does not properly expand
* Add support for includes and defines from file
* Replace old sdk path references in platform.txt
* use gcc-ar (#8013)
* Makes F_CPU generic for all SoC (#8007)
Based on CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ that is correctly defined in the sdkconfig file for each SoC.
* TIMER refactoring (#7904)
* refactor using GPtimer
* Updated timer HW test
* fix examples
* Add v2.0.7 in issue template (#7871)
* refactor using GPtimer
* Updated timer HW test
* fix examples
* Revert "Add v2.0.7 in issue template (#7871)"
This reverts commit fcc3b17d62ff57861f8913ca1f142fd5163b7457.
* Update upload-artifact to v3 in HW CI
* Revert "Update upload-artifact to v3 in HW CI"
This reverts commit 1ba228071718ba37c4e26d98db22f77b2a7364a6.
* replace resolution with frequency
* remove count_down option
* countup removed from examples + header
* Refactored timer object
* code cleanup + examples and tests fixes
* TimerAlarm fix
---------
Co-authored-by: Vojtěch Bartoška <76958047+VojtechBartoska@users.noreply.github.com>
* [Docs] ADC and Timer API Update (+some docs fixes) (#7906)
* updated docs
* remove hall sensor docs
Removed Hall sensor documentation as its no longer supported in IDF-5
* Fixed ESPNow examples location in docs
* Last timer refactored API + gpio small fix
* AlarmWrite fix
* Fixes APLL/PLL with RTC Frequency (#8025)
log_d() was displaying APLL for any SoC, but S3 and C3 has not such option, causing compilation errors.
* Update IDF libs and fix OPI PSRAM on S3
* Add setMode function HardwareSerial.c to set the esp32 uart mode for use with RS485 auto RTS (#7935)
* Added setMode function to set the esp32 uart mode
Used to set the esp32 uart mode for use with RS485 Half Duplex and the auto RTS pin mode. This will set/clear the RTS pin output to control the RE/DE pin on most RS485 chips.
* Add Success (bool) return in some functions
* Add Success (bool) return code to some functions
* Add Success (bool) return to some functions
* Add Success (bool) return to some functions
* Fix uartSetRxTimeout return type
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Add support for esp-elf-gdb
* WFG Crashfix (#8044)
* Update component libs
* IDF release/v5.1 (#8061)
* IDF release/v5.1 bb9200acec
* Update Esp.cpp
* IDF release/v5.1 420ebd208a
* Update esp32-hal-psram.c
* Switch SDK to be an external package
* fix path (#8096)
* Makes UART work at any APB Frequency (#8097)
Fixes HardwareSerial to work with IDF 5.1 on any CPU/APB Frequency (240MHz to 10MHZ), including user created low power modes.
* Add required callbacks for TinyUSB DFU
* Update version to 3.0.0
* Add ESP.getCoreVersion() and update ESP.getChipModel()
* Update timer hal for the latest 5.1
* Use separate RX and TX buffer sizes in HTTP client
optimizes download by allowing up to 4K packets to be received
* Rename clock tree enum name in latest 5.1
* ESP32-H4 support was removed in ESP-IDF v5.1
* IDF release/v5.1 2004bf4e11 (#8165)
* Deinit previous bus first (#8180)
* TIMER - add timer_started flag, fix timerEnd() + timer HW test (#8135)
* Add timer_started flag and stop before disable
* Fix timer HW test
* TOUCH - Peripheral manager implementation (#8129)
* Touch periman implemented
* Deinit previous bus first
* LEDC Refactoring - Peripheral manager implemented (#8126)
* LEDC periman implementation
* Fix examples
* Rework tone
* Update ledc docs
* fix missing bracket
* Update analog funtions esp32-hal.h
* Update CameraWebServer example
* Fix HiFreq_ADC example
* minor fixes - typos
* Avoid calling tone/notone when tone already runs on dif. pin
* Remove unused channels_resolution
* GPIO - Peripheral manager implementation (#8179)
* periman-implementation
* fix RGB_BUILTIN and remove space
* Enforces more consistency into Peripheral Manager (#8188)
* Avoid log_i() message the first time a bus is assigned
* Prevent operation with ESP32_BUS_TYPE_INIT
* keeps coding style
* do not print messages on INIT bus type
* [Arduino Core 3.0.0] RMT IDF5.1 Refactoring (#7994)
* RMT IDF5.1 refactoring
* Fixes initial value setting
* removed rmtRead() with user callback
* simplify/remove Read data structure
* Deep API simplification
* fixes the examples
* fix rmt.h
* adds support to APB different frequencies
* fixes CI and not defined RGB_BUILTIN
* new RMT API and examples
* fixing commentaties
* Update esp32-hal-rgb-led.c
* changes Filter API
* Fixes example with Filter API
* Update PlatformIO scripts for the upcoming 3.0 core (#8183)
* Update PlatformIO scripts for the upcoming 3.0 core
* Dynamically select proper framework-arduinoespressif32-libs package
With this change the dev-platform will be dynamically configured to
pull the latest .zip package with precompiled libraries from extracted from
package_esp32_index.template.json
* free memory on detach (#8264)
* SPI - Peripheral manager implementation (#8255)
* spi periman implementation
* fix header file
* remove unused struct
* fix missing braces
* Update esp32-hal-rmt.c (#8216)
Optimizing Peripheral Manager Test
* I2C - Peripheral manager implementation (#8220)
* i2c-master periman initial commit
* i2c-master make detachbus static + comment remove
* i2c-slave periman implementation
* SetPinBus to INIT on i2cDeinits
* Fix slave pins deinit
* remove dbg logs
* set ret to ESP_FAIL instead of returning
* Fix warnings in hal-spi caused by pariman transition
* Update esptool.py to version 4.6
* Add platform support for ESP_SR
* Add USB Type and valid pin check to periman
* replace bus with spi->num+1 (#8279)
* Remove default pins from SPI HAL
* Add commented out handlers for esptool.js in TinyUSB CDC
For future use
* Add build defines for host os and fqbn (for debug purposes)
* Provide proper memory caps total size
* Update Esp.cpp
* SDMMC - Peripheral manager implementation (#8289)
* sdmmc periman implemented
* save pins when SOC_SDMMC_USE_IOMUX
* IDF release/v5.1 4bc762621d (#8292)
* Adds missing pinMode (#8312)
* Adds missing pinMode
The example code lacks a pinMode() to initialize the GPIO 0 (button). In Arduino Core 3.0.0, it prints an error message when trying to read a not initialized GPIO.
* Update KeyboardLogout.ino
Adds <buttonPin> to keep code standard
* Update KeyboardReprogram.ino
Adds <buttonPin> to keep code standard
* LEDC Fade implementation (#8338)
* fade API + pointer fixes
* Add fade api
* Add fade example
* update ledc docs
* remove unused variables
* fix path to example
* Adds USB to Peripheral Manager - Arduino Core 3.0.0 (#8335)
* ETHERNET - Peripheral manager implementation (#8297)
* Peripheral manager implemented
* remove unused variable
* Add all RMII pins
* fix typo
* Adds HardwareSerial to Peripheral Manager Arduino 3.0.0 (#8328)
* Do not limit ETHERNET in periman to only ESP32. SPI is also an option
* Initial support for ESP32-C6 (#8337)
* Add checks for SOC defines (#8351)
* Add checks for SOC defines
* Add SoC checks to BLE library
* fix i2c compilation error
* fix wrong placement of include
* add check to SPI library
* add check to USB library
* add checks to Wire library
* Feature/esp32h2 support (#8373)
* Initial support for ESP32H2
* Additional changes for ESP32H2
* Update libs for ESP32H2
* Fix flashing on ESP32-H2
* Fix GPIO Configs for ESP32-C6 and ESP32-H2
* Update Timer test sketch
* Fix upload flash parameters
* Use ets_write_char_uart instead of ets_printf in log_printfv
* Print full chip report when log level is sufficient (#8282)
* ESP32-C3 does not have ets_write_char_uart
* Fix BLE gap event name
* HW Testing - Pytest update (#8389)
* update tests requirements
* remove already handled components
* Update version of pytest
* Add missing ESP32-H2 to hil.yml
* Updated FreeRTOS names (#8418)
* HW Testing - ESP32-C6 + ESP32-H2 fixes (#8404)
* add C6/H2 to tests cfg.json
* remove ,
* workflow runs-on runner by matrix
* Add need for arduino tag to select runner
* Add cryptography to requirements.txt
* Removed duplicate TX1 define for H2 (#8402)
* Fix broken examples
* Fixes RMT filter & idle timing and setup (#8359)
* Fixes Filter and Idle parameter to uint32
* Fixes Filter and Idle setup
* Fixes it to 5.1Libs branch
* fix RMT CLK source and Filter API
* fixes missing ;
* fixes missing ;
* fixes RMT example
* IDF release/v5.1 a7b62bbcaf (#8438)
* Add workflow to build executables from python scripts (#8290)
* Add workflow to build executables from python scripts
* Push binary to tools
* Enable executable signing on Windows
* Update get.py
* Push binary to tools
* Try with multiple files
* Try more actions
* Try powershell
* Restore tools so they do not get rebuilt
* Finalize scripts
* Push binary to tools
* App rollback should be after PSRAM is initialized
* Correcting RX1 to GPIO4 and TX1 to GPIO5 to be consistent with documentation. Previous pin use works but is inconsistent with C6 docs.
* Fixes Memory Leak (#8486)
* fixes preprocessor test (#8485)
* fixes preprocessor test
When using `#define USE_SOFT_AP`
Change
`&& not USE_SOFT_AP` ==> `&& !defined(USE_SOFT_AP)`
* Adds any BLE capable device in WiFiProv.ino
Removing ESP32 restriction for BLE Provisioning.
* fix flash mode read out for C6
* Add option for custom partitions without restrictions
* SD_MMC update (#8298)
* Updated SD_MMC lib and examples
* Removed getter implementation and commented usage in examples
* squashed updates
* IDF release/v5.1 f0437b945f (#8599)
* Update package_esp32_index.template.json
* Fix printf format build error in BTAdvertisedDeviceSet.cpp
---------
Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com>
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Ha Thach <thach@tinyusb.org>
Co-authored-by: Martin Turski <quiret@vfemail.net>
Co-authored-by: raviypujar <raviypujar@gmail.com>
Co-authored-by: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Co-authored-by: Tomáš Pilný <34927466+PilnyTomas@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: Daniel Berlin <dberlin@dberlin.org>
Co-authored-by: Nima Askari (نیما عسکری) <nimaltd@yahoo.com>
Co-authored-by: rtpmsys <106180646+rtpmsys@users.noreply.github.com>
Co-authored-by: bytiful <55647551+bytiful@users.noreply.github.com>
Co-authored-by: tmfarrington <tmfarrington@users.noreply.github.com>
Co-authored-by: Krzysiek S <chris.streh@gmail.com>
Co-authored-by: surt <carl.olsson@gmail.com>
Co-authored-by: Max Scheffler <max.scheffler@pm.me>
Co-authored-by: Clemens Kirchgatterer <clemens@1541.org>
Co-authored-by: Peter Pan's Techland <twinkle-pirate@hotmail.com>
Co-authored-by: Roman <programmeofficemilkyway@gmail.com>
Co-authored-by: Eistee <Eistee82@users.noreply.github.com>
Co-authored-by: David McCurley <44048235+mrengineer7777@users.noreply.github.com>
Co-authored-by: Gaya3N25 <30388176+Gaya3N25@users.noreply.github.com>
Co-authored-by: renebohne <rene.bohne@gmail.com>
Co-authored-by: Olivér Remény <25034625+remenyo@users.noreply.github.com>
Co-authored-by: davidk88 <david.kotar@gmail.com>
Co-authored-by: Vojtěch Bartoška <76958047+VojtechBartoska@users.noreply.github.com>
Co-authored-by: James Armstrong <jamesarmstrong3@me.com>
Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
Co-authored-by: Peter G. Jensen <root@petergjoel.dk>
Resolves deprecation warnings in CameraWebServer.ino. pin_sscb_sda -> pin_sccb_sda. pin_sscb_scl -> pin_sccb_scl.
The variables are in the same union and are identical.
* new variant Seeed XIAO_ESP32S3
* add pin define for camera example
* Remove excess comments and fix minor errors
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Remove inline code comments for the struct description
* Renamed ESPNow examples
* Changed example from C++ class to C struct
* Updated MultiHomedServers
* Updated BT Serial examples
* Added short overview of exaples - missing Enterprise
* Added draft of Enterprise header note
* Fixed note in README
* Fixed compilation error
* Changed FunctionalInterrupt example
* Fixes
* Returned FunctionalInterrupts to original state + added modified version as new example
* Moved and renamed example ESP32/FreeRTOS to MultiThreading/BasicMultiThreading
* Added dummy files
* Modified original example
* Fixed BasicMultiThreading.ino
* Added Example demonstrating use of queues
* Extended info in BasicMultiThreading
* Renamed Queues to singular Queue
* Added Mutex example
* Added Semaphore example
* Moved info from example to README
* Moved doc from Mutex to README
* Added Queue README
* Removed unecesary text
* Fixed grammar
* Increased stack size for Sempahore example
* Added headers into .ino files
* Added word Example at the end of title in README
* removed unused line
* Added forgotten README
* Modified BasicMultiThreading example
* Added missing S3 entry in README
* moved location
* adds extended HardwareSerial examples
* Adds new example with Serial RxTimeout
* adds and improves Serial onReceive expamples
* adjust includes CMake - UART example
* adjust includes CMake - UART example
* fixes CMake and CI
* adds ESP/Serial to CMakeList
* adds ESP/Serial to CMakeList
* fixes demo include
* fixes BREAK demo
* fixes onReceive demo
* Changes FIFO Full criteria
Changed the "1-by-1" Serial only when baud rate is 57600 or lower.
* example code replacement
* replaces functions in hal
This commit addes an example showing how to receive messages using the TWAI
driver interface and a CAN transceiver. Specifically, the example demonstrates:
- How to configure and install the TWAI drvier
- How to poll for TWAI events (i.e., alerts) using twai_read_alerts()
- How to handle the various events (such as TWAI_ALERT_RX_DATA)
Closes https://github.com/espressif/arduino-esp32/pull/7430
Co-authored-by: Stephan Martin <designer2k2@gmail.com>
The original code assumes 100Hz FreeRTOS tick rate and just supplies vTaskDelay with the assumed number of ticks required for the wanted delay. This patch simply fixes it to use portTICK_PERIOD_MS, thereby working correctly regardless of what tick rate FreeRTOS has been configured to run at.
* Removed option to change CHANNEL
* Revert "Removed option to change CHANNEL"
This reverts commit b2ec27de1d2d4703a15f6397550a46896413828a.
* Fixed the ability to change CHANNEL
* WiFi scan only on selected channel
* Improve RGB LED Driver
Replaces the use of the `LED_BUILTIN` variable by creating a new variable called `RGB_BUILTIN`. On boards with both a regular LED and RGB LED, this change provides functionality to control either LED.
The `LED_BRIGHTNESS` variable is changed to `RGB_BRIGHTNESS`, which aligns more closely with the `RGB_BUILTIN` variable name.
`BOARD_HAS_NEOPIXEL` is no longer necessary; it is replaced by `RGB_BUILTIN`.
* Update BlinkRGB example
Update example code for changes with the RGB driver:
- Replace `LED_BUILTIN` and `BOARD_HAS_NEOPIXEL` with `RGB_BUILTIN`
- Replace `LED_BRIGHTNESS` with `RGB_BRIGHTNESS`
* Update board variants
Update board variants for changes with the RGB driver:
- Remove `BOARD_HAS_NEOPIXEL`
- Define `RGB_BUILTIN` pin
- Replace `LED_BRIGHTNESS` with `RGB_BRIGHTNESS` to align with `RGB_BUILTIN` name
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Vojtěch Bartoška <76958047+VojtechBartoska@users.noreply.github.com>
Description of Change
Original code does not work (crashing) - related issue #6832 - now fixed.
Extended description to be more helpful.
Added options to modify the setup at the top of the code via constants.
Added option do plot with Arduino Serial plotter.
Even if the crashing was solved alone the ledc PWM would not output any signal.
Tests scenarios
Tested on ESP32 with oscilloscope and signal generator.
Related links
Closing #6832
* Initial implementation of RGB driver via digitalWrite
* Moved constants to pins_arduino.h
* Changed pin definition + added example
* Wrapped BlinkRGB in #ifdef BOARD_HAS_NEOPIXEL
* Removed forgotten log from example
* Moved RGBLedWrite to new file esp32-hal-rgb-led and created pinMode in variatn.cpp
* Updated example - lowered single channel brightness to LED_BRIGHTNESS
* Changed function name from RGBLedWrite to neopixelWrite + code polishing
* Moved pinSetup portion related to RGB back to common file
Summary
Added compiler.warning_flags to all chips in platform.txt to reflect users setting of warning level output during compilation (set up in Arduino IDE preferences)
Impact
When a warning is set to none the compilation will no longer display warnings
Related links
Solves issue #6118
Summary
Touch Sensor refactoring to be based on IDF 4.4.
Adds support to ESP32S2 and future ESP32S3.
Adds some new APIs:
For all chips:
void touchAttachInterruptArg(uint8_t pin, void (*userFunc)(void*), void *arg, uint32_t threshold);
This function allows the user to add and pass a void* parameter to the ISR user callback.
void touchDetachInterrupt(uint8_t pin);
This function detaches ISR call back for the touch pad pin.
Only ESP32 chip
void touchInterruptSetThresholdDirection(bool mustbeLower);
This function allows the user to set if the ISR callback will be activated when the touch sensor readings are lower or higher than the threshold defined. See example TouchButton.ino.
Only ESP32-S2 and ESP32-S3 chips
bool touchInterruptGetLastStatus(uint8_t pin);
This function reports if the touch pad pin is touched or untouched. It can be used with ISR to identify when it is touched and untouched (released). See example TouchButtonV2.ino.
Impact
None. ll original APIs and examples now run on ESP32 and ESP32-S2.
Related links
Fix#6095Fix#6034Fix#5799Fix#5745Fix#5527Fix#5493Fix#4321Fix#4044Fix#2722Fix#2625
* Revert "Examples update, add a note for configTime() that only one ntp server is supported by lwip",
fixed in espressif/esp32-arduino-lib-builder#51
This reverts commit 6b1020967a171c549b3d956825fd0d395de9cce0.
* SimpleTime: add NTPoDHCP option and TimeZone env variable
Summary
This PR is refactoring of SigmaDelta HAL in order to use IDF instead of current Register manipulation approach.
Impact
Change in API:
uint32_t sigmaDeltaSetup(uint8_t channel, uint32_t freq);
changed to -->
uint32_t sigmaDeltaSetup(uint8_t pin, uint8_t channel, uint32_t freq);
void sigmaDeltaAttachPin(uint8_t pin); removed, no longer needed. Pin is attached in sigmaDeltaSetup()
Summary
RMT HAL refactoring based on IDF.
Impact
Improves RMT by adding IDF v4.4 support.
Receiving RMT can handle any size of data.
rmtInit() has a new parameter - RxBufferSize - to hold any number of data when receiving RMT.
rmtWrite() has a new parameter - wait_tx_done - to block writing until sending all data.
Related links
fix#5905
## Summary
Arduino ```setup()``` and ```loop()``` run under a Task with a fixed Stack size of 8KB.
Users may want to change this size.
This PR adds this possibility by just adding a line of code, as for example:
``` dart
ESP_LOOP_TASK_STACK_SIZE(16384);
void setup() {
}
void loop() {
}
```
## Impact
None. It adds a new functionality to ESP32 Arduino.
If ```ESP_LOOP_TASK_STACK_SIZE(newSize);``` is not declared/used, it will compile the sketch with the default stack size of 8KB.
## Related links
fix#6010https://github.com/espressif/arduino-esp32/issues/6010#issuecomment-992701658
Thanks @igrr for the suggestion!
A typographical error is corrected in the 2nd line of the comment.
From = " This is un example howto use Touch Intrrerupts "
To = " This is an example of how to use Touch Intrrerupts "
This is very much still work in progress and much more will change before the final 2.0.0
Some APIs have changed. New libraries have been added. LittleFS included.
Co-authored-by: Seon Rozenblum <seonr@3sprockets.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Mike Dunston <m_dunston@comcast.net>
Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com>
Co-authored-by: Seon Rozenblum <seonr@3sprockets.com>
Co-authored-by: microDev <70126934+microDev1@users.noreply.github.com>
Co-authored-by: tobozo <tobozo@users.noreply.github.com>
Co-authored-by: bobobo1618 <bobobo1618@users.noreply.github.com>
Co-authored-by: lorol <lorolouis@gmail.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Limor "Ladyada" Fried <limor@ladyada.net>
Co-authored-by: Sweety <switi.mhaiske@espressif.com>
Co-authored-by: Loick MAHIEUX <loick111@gmail.com>
Co-authored-by: Larry Bernstone <lbernstone@gmail.com>
Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
Co-authored-by: 快乐的我531 <2302004040@qq.com>
Co-authored-by: chegewara <imperiaonline4@gmail.com>
Co-authored-by: Clemens Kirchgatterer <clemens@1541.org>
Co-authored-by: Aron Rubin <aronrubin@gmail.com>
Co-authored-by: Pete Lewis <601236+lewispg228@users.noreply.github.com>
* Add an aditional (void *) arg to the RMT callback - to allow more flexible handling of the callback (e.g. by passing a private struct or a class pointer). Same pattern as used by the Ticker() and many others. Example updated & new example with a trapoline added.
* Fix example for new API
* Fix lint warnings
* Add a second missed example.
* Correct timeout & improve socket error handling.
