Tested on some of the popular S3 board bought from Amazon, the digitalRead of an INPUT pin is LOW, which stops the timer right after start.
Setting it to INPUT_PULLUP will fix it.
* feat(touch): Support NG touch driver for P4
* fix(ci): Touch test + IDF compilation fixes
* fix(ci): remove debug prints from touch test
* fix(ci): Fix touch test for esp32
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* ci(partitions): Use default partition for compilation in CI
* fix(ci): Fix paths for sdkconfig
* Fix build of camera web server
* fix(ci): Fix test requirements check
* ci(append): Add option to append to all FQBNs
* fix(json): Fix JSON files to compile examples
* fix(example): Use requires instead of target in ci.json
fix(zigbee): Improve JSON files
Co-authored-by: Jan Prochazka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* fix(regex): Trim argument before grep
* docs(ci): Add documentation about FQBNs in CI
* fix(json): Remove redundant FQBNs
* fix(json): Skip requirements if libs are not installed
* fix(partitions): Use rainmaker specific partitions
---------
Co-authored-by: me-no-dev <hristo@espressif.com>
Co-authored-by: Jan Prochazka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Initial commit - light bulb + switch working
* Add Thermostat + fix enum
* Dev update: roles, cb removal, handlers
Fixed ep_thermostat to compile successfully
Removed cb from all EP, as it have been removed, virtual methods will be used instead.
Moved zigbee handlers out of Zigbee_core to Zigbee_handlers for better readability.
Fixed zigbeeInit to be bool and return status of initialization for begin function.
Updated examples with edited roles and custom method for on_off light
* Dev update: implement on/off light and switch methods
Implemented basic function calls of switch commands to on/off light:
lightToggle, lightOn, lightOff, ...
Implemented virtual methods for on/off light that have to be override in user code:
setOnOff, sceneControl, setOnOffTime, setOffWaitTime
APIs can be changed, still early development.
* Dev update: Factory reset, names, multiple EPs
Implemented Factory reset of Zigbee device, in order to connect to new network without reflashing/erasing flash
Implemented optional setting for Manufacturer and Model names
Added option to allow endpoint to have multiple endpoint connected -> switch - 2 lights (tested)
Minor sketches update
* Dev update: Device ID to string
Implemented easy transfer from device it to Device type (0x0000 = ESP_ZB_HA_ON_OFF_SWITCH_DEVICE_ID -> "General On/Off switch".
* Implement cmd default response handler
* Remove unused _identify_cluster
* Dev Update: Color DImmable light + switch implemented
Implemeted color dimmable light and color dimmer switch HA devices + examples.
Removed unnecessary stored attribute cluster
Renamed on/off light and switch examples
* Implement Network Scanning
Implemented Zigbee network scanning (async) to mostly match WiFi scan APIs.
Added Zigbee_Scan_Networks example
* Dev Update: Thermostat and Temperature sensor EP
Implemeted thermostat and temperature sensor HA devices + examples.
Implemented configure report handler.
Updated READMEs and description of examples.
Minor code updates
* fix(): Replace deprecated function
* Remove ported IDF examples
* Update Zigbee examples with new APIs
* Dev Update: Version setting, Thermostat fix, ...
Simplified bounded device print as the structure is common for any EP type
Allowed setting custom app version for EP, default is 0
Small fixes and code updates
* Remove EP template + add lib to CMakeLists
* Rename classes to have proper naming
* Add check for SOC_IEEE802154_SUPPORTED
* Ignore false positive unused variable/function
* Fix compilation errors in examples
* Fill keyworkds.txt, remove unnecessary defines
* Rename methods, variables + make private/protected
* Remove unnecesary defaults defines
* Remove outdated comments
* Update Scan networks Readme
* fix(example): Use proper naming of func and variables
* Change virtual methods to callbacks (TODO)
* Refactor classes methods + implement Identify command
* Apply suggestions from code review by @lucasssvaz
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update READMEs + add openNetwork fucntion
* Use [[maybe_unused]] instead of #pragma
* Use gpio calls for OnOff Light example
* ci(pre-commit): Apply automatic fixes
* fix(): Codespell issues
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* ci(json): Add support for checking sdkconfig before running tests
* docs(ci): Add explanation about requires field in JSON
* fix(json): Ignore comments when searching requirements
* feat(json): Add extended regex support to requires field
* change(json): Move to using requirements in JSON
* fix(json): Fix requirements for touch tests
* refactor(json): Fix formatting of JSON files
* fix(spi): Fix SPI example and JSON
* fix(esp32p4): Add missing touchpad definitions
* fix(esp32p4): Add missing target in SPI example
* fix(esp32p4): Start touch driver fix
* fix(esp32p4): Skip touch examples while it is not implemented
* fix(esp32p4): Add missing analog pin definitions
* refactor(formatting): Fix formatting that was broken in P4 PR
* fix(openthread): Add missing targets to skip
* fix(esp32p4): Skip ethernet sketches
* fix(esp32p4): Disable periman test while touch is not implemented
* fix(esp32p4): Disable touch test while touch is not implemented
* fix(esp32p4): Fix UART test
* fix(esp32p4): Skip Wi-Fi test
* fix(esp32): Skip unsupported example
* fix(esp32p4): Fix skip files
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(ledc): Allow attaching multiple pins to 1 channel
* feat(ledc): Add ledcWriteChannel function
* feat(ledc): Print info about already set channel
* docs(ledc): Add ledcWriteChannel function and attach update
* feat(ledc): Add example and fixes
* feat(ledc): Remove commented code
* feat(ledc): Fix missing new line at end of file
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(example): EXT0 and EXT1 wakeup
Fixes the Deep Sleep wakup example to run with IDF5.1. The API has changed and a adjustment was necessary.
* feat(wakeup): Use Macro for GPIO_NUM
Changed the example to use a #define for the RTC IO Pin (GPIO) used in the example.
* fix(typo): typo and commentaries
Fixes the commentary to the correct IDF terms.
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(libs): Add ESP-NOW Arduino library
* Update libraries/ESP_NOW/src/ESP32_NOW.cpp
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update libraries/ESP_NOW/src/ESP32_NOW.cpp
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* fix(esp-now): Add check if Wifi is started.
* Fix ESP_NOW_Serial
* Add ESP NOW Serial Example
* Add comment
* Skip esp-now example for esp32h2
* Add broadcast address constant
* Change return value to align with other APIs
* Apply suggested changes
* Improve example
* Fix example
* Improve serial example
* Add argument to receive callback to know if a message was broadcasted
* Update libraries/ESP_NOW/src/ESP32_NOW_Serial.cpp
* Simplify example
* Add broadcast example
* Change comments
* Change comment
* Improve broadcast master example
* Remove examples using IDF's API
* Fix example
* Add network example
* Add skip file
* Add LMK back
* Add logs
* Improve example
* Fix example
* Apply @suglider suggestions from code review
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Add documentation
* fix examples links in docs
* Apply @lucasssvaz suggestions to docs
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update espnow.rst
* Update examples
* make onSent optional and remove underscores for virtual functions
* Make onRecieve also optional and make constructor protected
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: me-no-dev <hristo@espressif.com>
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Create ESP_NetworkInterface class and have Ethernet extending it
* Update CMakeLists.txt
* Split networking from WiFi (H2 can now use Ethernet)
Now all libs have been checked yet. More to do on WiFi side
* Fix build errors
* Guard WiFi classes and fix RMII ETH examples
* Decouple network related libraries from WiFi
* Fix examples and WiFiUpdate
* Guard WiFiProv lib to compile only on WiFi chips
* Add periman string for network and "fix" mdns on the first ETH
* Revert back location of Client/Server/Udp in order to accept some PRs
* Fix periman
* Some fixes from merging master
* Fix web server missing fs.h
* Move Client, Server and Udp out of WiFi
* More fixes
* more fixes
* Fix CMakekLists and rework lib menu dependencies
* Fix CMake issues
* move back WiFiClient to rebase with master
* Update ETH_TLK110.ino
* Move back WiFiClient
* Update progress
* Update WiFiGeneric.cpp
* More fixes
* Switch AP to the new interface
* Cleanup
* Rename AP methods
* Add extra interface info for Printable
* Rename IPv6 getters to clarify that they are returning LinkLocal address
cc @sgryphon
* Rename network classes
cc @sgryphon
* Update NetworkManager.h
* Rename WiFi Server and UDP
* Rename WiFiClient and WiFiClientSecure
* Update CMakeLists.txt
* Update on-push.sh
* Rename Network library
* Remove unnecessary guard
* Get the correct interface MAC address for mDND Workstation service
* Apply suggestions from code review
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* feat: onReceiveExample.ino
Adds a new example that uses HardwareSerial::onReceive(). The example demosntrates how to read all the data sent to UART0, considering that the end of transmission is defined by a period of time with UART in idle state.
* fix: onReceiveExample.ino
Fixes typos
* feat: add explanation header
* fix: mutex release
* fix: add Mutex verification
* feat: Mutex error message
* feat: Mutex NULL testing
* feat(hwcdc): fix delay
Fixes delay when CDC is disconnected. At this time is only fixes it when USB cable is unplugged.
* feat(hwcdc): fix delay
fixes delay when CDC is not connected. It was only considering when the USB cable was not plugged.
* feat(hwcdc): add 2 methods
Adds 2 new methods:
- isPlugged() will return true when USB cable is plugged, false otherwise.
- isConnected() will return true when USB CDC is connected to a application in the USB Host side and communication is stablished.
* feat(hwcdc): adjusts APIs
Fixes the example to use the new added APIs for checking if USB cable is plugged and for checking if CDC is connected.
* fixes api declaration
* fixes API declaration
* feat(hw_cdc):fixes the hardware cdc jtag plugged/unplugged status
This will use a new IDF 5.1 feature to detect if the USB HW CDC is plugged or not. This can be checked testing HWCDCSerial.
It also fixes issues related to timeout or delays while writing to the HW Serial when USB is unplugged.
* feat(usb): Creates HWSerial_Events.ino example
* feat: adds .skip.esp32
Skips the ESP32 SoC test given that it has no USB
* feat: adds .skip.esp32s2
Skips the ESP32S2 because it has no HW CDC JTAG interface
* fix: fixes issues with Ubuntu CI
Only compiles the example in case it is using Hardware CD and JTAG mode.
* feat(serialcdc): non block functions
modifies write and flush to do not clock in case CDC host is not connected to the CDC client from the C3/S3/C6/H2
* fix(HWCDC): changes made demands testing for CDC ON BOOT
* feat(hwcdc): Improves HWSerial_Events.ino
Improves the example by adding more information about USB being plugged and CDC being connected.
* feat(hwcdc): solves CDC connection issue
Detects correctly when CDC is or not connected.
Deals with USB unplugged while the sketch is printing to CDD.
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Apply suggestions from code review
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* fix(esp32): 🐛 Fixed "Invalid mbox" in the Wi-Fi example
* fix: changes the code to actually connect to the WiFi in roder to get time and date
* fix: removing call to WiFi.begin() at the end of the sketch. It must be called at first.
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
