* fix(cdc): Disable SOF interrupt and CDC reset on begin()
* feat(jtag/hwcdc): uses SOF detection from IDF
Restores back IDF 5.1 SOF detection method in order to fix the HW CDC uploading process.
Enabling SOF mask in the ISR routine causes a problem with esptool uploading when using CDC/JTAG port.
* feat(jtag/hwcdc): uses SOF detection from IDF
Restores back IDF 5.1 SOF detection method in order to fix the HW CDC uploading process.
Enabling SOF mask in the ISR routine causes a problem with esptool uploading when using CDC/JTAG port.
* feat: revert include
This include is not necessary here.
Moving it back to the HWCDC.cpp file.
* feat: adding a necessary include
Adding the IDF 5.1 SOF check include file.
Necessary to make it compile. Moved from HWCDC.h file to here.
* feat: move function call to header file
* feat: Moved SOF function
* feat: Removed unused header file
* fix: Use correct SOF header file
* ci(pre-commit): Apply automatic fixes
* Small fixes for Debug prints on C3, C6 and H2
* fix(usb): Fix log prints
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Begin() may undo a setpins() that has set RTS and/or CTS pin.
This pins are only changed with RTS and CTS.
setpins() can be called after or before begin()
when called before, begin() shall not change those pins.
* feat(uart): setBufferSize
It makes sure that setting TX buffer size will match availableForWrite() response. It also sets the buffer to the minimum instead of doing nothing and returning an error.
For RX Buffer, it sets the minimum and also don't return an error.
This makes the APIs better and easy to understand its results.
* feat: sets TX buffer
This will allow to set TX buffer to a minimum with no error message.
It also makes it works as in the Arduino API specification that is to return the buffer available space. In ESP32 case it will be the minmum the HW TX FIFO size of 128 bytes.
* feat: adjust availableForWrite
This change will make sure that if no TX Ringbuffer is used, it will return the UART FIFO available space. Otherwise, it will return the Ringbuffer available space, as defined in the Arduino especification.
* UART: fixes begin()
* Typo: fixes typos and some testing left over
* feat: fixes end()
* feat: adjust internal baurate
* feat: Changes CI [HardwareSerial]
[HardwareSerial]: Changes CI to match new HardwareSerial begin() and end()
* feat: fixes auto_baudrate_test
[uart]: fixes end(void) instead of end(bool)
* feat: adjust copyright year
[fix]: adjust commentary of the copyright year
* Extended bus types for peripheral manager
* add extra_type to peripheral manager
* Fix function call
* Fix check for no extra_type
* Add extra_type for SD and ETH CS pin
* added bus_num and bus_channel to pin structure
* update printPerimanInfo with new fields
* replaced setting bus to INIT with DetachPin call
* add defines for extra attributes
* use new required parameters in perimanSetPinBus
* function rename
* removed duplicate define
* Update print format
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Initial changes to compile under ESP-IDF v5.1
* Initial import for ESP-IDF v5.1 libs
* Update toolchain
* Update esp32-hal-psram.c
* Add missing LDs
* Update platform.txt
* Stop some CI jobs, because they will always fail
* Fix examples
* Update app_httpd.cpp
* Update ResetReason.ino
* Warnings fixes
* Added the example guideline and template (#7665)
* Added the example guideline and template
* PR review changes with some typos and grammar fixes
* Changes according to the PR review
* Added ESP32-S3 link to the datasheet (#7738)
* Update HiFreq_ADC.ino
* Replace periph_ctrl.h use because of deprecation
* Replace esp_spi_flash.h use because of deprecation
* Add includes to male mDNS::enableWorkstation compile
* Fix ssl_client mbedtls_pk_parse_key callback
* Update temperature sensor driver
* Allow sketch_utils to compile with arduino-cli
* Run CI with arduino-cli
* Fix arduino-cli CI build on Windows
* Refactor platform.txt to not use components installed through the board manager when running from git
* Initial Peripheral Manager Implementation
* Update SigmaDelta driver to use the new ESP-IDF driver API
* Small improvements to peripheral manager and SigmaDelta
* Remove deleted function from SigmaDelta header
* Update DAC driver to use the new ESP-IDF driver API
* Adds softAp(String) to make it compatible with ESP8266 (#7801)
* Fix commentary (#7800)
Minor fix based on observation done in https://github.com/espressif/arduino-esp32/issues/7795#issuecomment-1416868611
* add adafruit new board feather esp32s2 reserve tft (#7794)
* bugfix: add <stdint.h> for uint8_t to avoid compilation failure (GCC 11.2.0) (#7744)
* Adding 3rd party boards for VALTRACK-V4-VTS-ESP32-C3 & VALTRACK-V4-MFW-ESP32-C3 (#7735)
* Added VALTRACK-V4-VTS-ESP32-C3 board definition
Created pins_arduino.h & made changes to boards.txt with necessary changes
* Modified the URL
* Renamed json
* renamed all auRL
* Adding VALTRACK-V4 series board definitions
Added VALTRACK-V4-VTS-ESP32C3 & VALTRACK-V4-MFW-ESP32-C3 board variants
* Adding VALTRACK-V4 series board definitions
Added VALTRACK-V4-VTS-ESP32C3 & VALTRACK-V4-MFW-ESP32-C3 board variants
* Reverted package_esp32_index.template.json
restored package_esp32_index.template.json from edits
* Reverted package_esp32_index.template.json
Added new line to package_esp32_index.template.json
* Update Platformio CI (#7725)
* WiFiClient example fix (#7711)
* Modified WiFiClient example to use thingspeak instead of non-functionig sparkfun
* Moved instructions to README
* Fixed spelling
* Added link to S3 datasheet
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Mirror update from Heltec repository (#7709)
Heltec updated the I2C pins in b10f4bf85d
* Fixes BLE data printing (#7699)
* Fixes BLE data printing
BLE data has no '\0' terminator, therefore it can't be printed as a regular C string.
This fix just prints the BLE data based on its length.
* Simplify printing to a single call
* split menu options + lora_32_V3 fix (#7697)
* Change header gaurd name (#7696)
* Fix Name (#7691)
Wrong name in definitions.
* Fix error in WiFiClient.cpp where the connect function fails for timeouts below 1 second (#7686)
* Update WiFiClient.cpp
This change will allow specifying connect timeouts below 1 second. Without this change, if connect timeouts under 1 second are given, the connect defaults to 0ms and fails.
This will also allow timeouts in fractions of seconds, e.g. 1500ms. Without this change, connect timeouts are truncated to full second increments.
* Make parameter timeout_ms clear
* Change connection timeout_ms name for clarity
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* fixed the function header (#7674)
* fixed the function header
* fixed function name and paramaters
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Ticker fix solving #6155 (#7664)
* Wrapped Ticker functions with #pragma disabling -Wcast-function-type
* Revert "Wrapped Ticker functions with #pragma disabling -Wcast-function-type"
This reverts commit 160be7e67a10d01b6e44c4bf2521c0ccd6348976.
* Fixed Ticker example
* Modified Ticker example
* Fixed LED_BUILTIN err for ESP32
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* setPins fix ESP32 "specified pins are not supported by this chip." (#7646)
[ESP32: SDMMCFS::begin hardcodes the usage of slot 1, only check if the pins match slot 1 pins.]
setPins() was testing pins D1, D2 and D3 all against D1 ... fine in 1 pin mode when all are -1 not so much if you're trying to get 4 pin mode working.
I now see this function doesn't really do anything on the ESP32...accept now correctly checks that you are trying to use the slot 1 pins.
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Allow passing IP as connect method parameter in WiFiClientSecure and skip unnecessary host-ip conversions (#7643)
* Add LED_BUILTIN* definitions and initialization for LEDs to stop them floating. (#7636)
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Expand path to tinuf2 image when checking existence in platformio-build.py (#7631)
* Expand path to tinuf2 image when checking existence
* More isFiles fixed
* Remove (useless) trailing semicolon from Print.cpp (#7622)
* ADD: New variant Edgebox-ESP-100 (#7771)
* ADD: New variant Edgebox-ESP-100
* FIX: Edgebox-ESP-100 Board.txt usb mode option change back to default value as ESP32S3
* Add Crabik Slot ESP32-S3 board (#7790)
* Added Crabik Slot ESP32-S3
* Adding CPU frequency settings and removing excess from partition scheme settings
* new variant LilyGO T-Display-S3 (#7763)
* new variant LilyGO T-Display-S3
https://github.com/Xinyuan-LilyGO/T-Display-S3
* Add boards.txt definition
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* Update get.py to support Apple ARM64
* Update package_esp32_index.template.json
* WString Return bool (#7774)
* Add Roboheart Hercules development board to the esp32-core (#7672)
* added Roboheart Hercules pin definitions and board.txt entries
* added package_roboheat.json for prototyping
* Roboheart Hercules pins
* Updated the pins
* Delete package_roboheart.json
* Requested changes
---------
Co-authored-by: renebohne <rene.bohne@gmail.com>
* Reword "ESP-IDF as Component" (#7812)
I think "Arduino as an ESP-IDF component" or just "As ESP-IDF component" instead of "ESP-IDF as Component" is more correct way to name the link.
1. "ESP-IDF as Component" would imply that ESP-IDF is some sort of library for Arduino, which is (IMO) misleading, because it's true the other way around.
2. It's written as "Arduino as an ESP-IDF component" on the webpage it points to as well.
- Also I removed the capitalization from "Component" as I have not found a reason why is it capitalized.
* add new board Adafruit Feather ESP32-S3 Reverse TFT (#7811)
* Multi threading examples (tasks, queues, semaphores, mutexes) (#7660)
* Moved and renamed example ESP32/FreeRTOS to MultiThreading/BasicMultiThreading
* Added dummy files
* Modified original example
* Fixed BasicMultiThreading.ino
* Added Example demonstrating use of queues
* Extended info in BasicMultiThreading
* Renamed Queues to singular Queue
* Added Mutex example
* Added Semaphore example
* Moved info from example to README
* Moved doc from Mutex to README
* Added Queue README
* Removed unecesary text
* Fixed grammar
* Increased stack size for Sempahore example
* Added headers into .ino files
* Added word Example at the end of title in README
* removed unused line
* Added forgotten README
* Modified BasicMultiThreading example
* Added missing S3 entry in README
* moved location
* Update ESP-IDF libs
* Update CMakeLists.txt
* Update esptool to v4.4
* Add function timerAttachInterruptFlag (#7809)
* Update esptool to v4.5
* ADC refactoring (#7827)
* Adc refactored + periman implementation
Peripheral manager still needs to be checked if the implementation is right.
* switched to working solution for milivolts read
* Periman detachbus fix
* coding style
* fix CI warnings
* fix FreeRTOS example
* Update ETH.cpp
* Update FunctionalInterruptStruct.ino
* Update package_esp32_index.template.json
* Update package_esp32_index.template.json
* Fixes for the latest IDF v5.1
* update esp-idf libs and toolchain
* Turn OFF auto crystal frequency for ESP32 (needed by TWAI)
* Update examples
* Switch build to mostly use flags from files
Includes can not be done this way
* Reorganize flag files
* Optimize chip build flags further
* Revert defines from file. MBEDTLS_CONFIG_FILE does not properly expand
* Add support for includes and defines from file
* Replace old sdk path references in platform.txt
* use gcc-ar (#8013)
* Makes F_CPU generic for all SoC (#8007)
Based on CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ that is correctly defined in the sdkconfig file for each SoC.
* TIMER refactoring (#7904)
* refactor using GPtimer
* Updated timer HW test
* fix examples
* Add v2.0.7 in issue template (#7871)
* refactor using GPtimer
* Updated timer HW test
* fix examples
* Revert "Add v2.0.7 in issue template (#7871)"
This reverts commit fcc3b17d62ff57861f8913ca1f142fd5163b7457.
* Update upload-artifact to v3 in HW CI
* Revert "Update upload-artifact to v3 in HW CI"
This reverts commit 1ba228071718ba37c4e26d98db22f77b2a7364a6.
* replace resolution with frequency
* remove count_down option
* countup removed from examples + header
* Refactored timer object
* code cleanup + examples and tests fixes
* TimerAlarm fix
---------
Co-authored-by: Vojtěch Bartoška <76958047+VojtechBartoska@users.noreply.github.com>
* [Docs] ADC and Timer API Update (+some docs fixes) (#7906)
* updated docs
* remove hall sensor docs
Removed Hall sensor documentation as its no longer supported in IDF-5
* Fixed ESPNow examples location in docs
* Last timer refactored API + gpio small fix
* AlarmWrite fix
* Fixes APLL/PLL with RTC Frequency (#8025)
log_d() was displaying APLL for any SoC, but S3 and C3 has not such option, causing compilation errors.
* Update IDF libs and fix OPI PSRAM on S3
* Add setMode function HardwareSerial.c to set the esp32 uart mode for use with RS485 auto RTS (#7935)
* Added setMode function to set the esp32 uart mode
Used to set the esp32 uart mode for use with RS485 Half Duplex and the auto RTS pin mode. This will set/clear the RTS pin output to control the RE/DE pin on most RS485 chips.
* Add Success (bool) return in some functions
* Add Success (bool) return code to some functions
* Add Success (bool) return to some functions
* Add Success (bool) return to some functions
* Fix uartSetRxTimeout return type
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Add support for esp-elf-gdb
* WFG Crashfix (#8044)
* Update component libs
* IDF release/v5.1 (#8061)
* IDF release/v5.1 bb9200acec
* Update Esp.cpp
* IDF release/v5.1 420ebd208a
* Update esp32-hal-psram.c
* Switch SDK to be an external package
* fix path (#8096)
* Makes UART work at any APB Frequency (#8097)
Fixes HardwareSerial to work with IDF 5.1 on any CPU/APB Frequency (240MHz to 10MHZ), including user created low power modes.
* Add required callbacks for TinyUSB DFU
* Update version to 3.0.0
* Add ESP.getCoreVersion() and update ESP.getChipModel()
* Update timer hal for the latest 5.1
* Use separate RX and TX buffer sizes in HTTP client
optimizes download by allowing up to 4K packets to be received
* Rename clock tree enum name in latest 5.1
* ESP32-H4 support was removed in ESP-IDF v5.1
* IDF release/v5.1 2004bf4e11 (#8165)
* Deinit previous bus first (#8180)
* TIMER - add timer_started flag, fix timerEnd() + timer HW test (#8135)
* Add timer_started flag and stop before disable
* Fix timer HW test
* TOUCH - Peripheral manager implementation (#8129)
* Touch periman implemented
* Deinit previous bus first
* LEDC Refactoring - Peripheral manager implemented (#8126)
* LEDC periman implementation
* Fix examples
* Rework tone
* Update ledc docs
* fix missing bracket
* Update analog funtions esp32-hal.h
* Update CameraWebServer example
* Fix HiFreq_ADC example
* minor fixes - typos
* Avoid calling tone/notone when tone already runs on dif. pin
* Remove unused channels_resolution
* GPIO - Peripheral manager implementation (#8179)
* periman-implementation
* fix RGB_BUILTIN and remove space
* Enforces more consistency into Peripheral Manager (#8188)
* Avoid log_i() message the first time a bus is assigned
* Prevent operation with ESP32_BUS_TYPE_INIT
* keeps coding style
* do not print messages on INIT bus type
* [Arduino Core 3.0.0] RMT IDF5.1 Refactoring (#7994)
* RMT IDF5.1 refactoring
* Fixes initial value setting
* removed rmtRead() with user callback
* simplify/remove Read data structure
* Deep API simplification
* fixes the examples
* fix rmt.h
* adds support to APB different frequencies
* fixes CI and not defined RGB_BUILTIN
* new RMT API and examples
* fixing commentaties
* Update esp32-hal-rgb-led.c
* changes Filter API
* Fixes example with Filter API
* Update PlatformIO scripts for the upcoming 3.0 core (#8183)
* Update PlatformIO scripts for the upcoming 3.0 core
* Dynamically select proper framework-arduinoespressif32-libs package
With this change the dev-platform will be dynamically configured to
pull the latest .zip package with precompiled libraries from extracted from
package_esp32_index.template.json
* free memory on detach (#8264)
* SPI - Peripheral manager implementation (#8255)
* spi periman implementation
* fix header file
* remove unused struct
* fix missing braces
* Update esp32-hal-rmt.c (#8216)
Optimizing Peripheral Manager Test
* I2C - Peripheral manager implementation (#8220)
* i2c-master periman initial commit
* i2c-master make detachbus static + comment remove
* i2c-slave periman implementation
* SetPinBus to INIT on i2cDeinits
* Fix slave pins deinit
* remove dbg logs
* set ret to ESP_FAIL instead of returning
* Fix warnings in hal-spi caused by pariman transition
* Update esptool.py to version 4.6
* Add platform support for ESP_SR
* Add USB Type and valid pin check to periman
* replace bus with spi->num+1 (#8279)
* Remove default pins from SPI HAL
* Add commented out handlers for esptool.js in TinyUSB CDC
For future use
* Add build defines for host os and fqbn (for debug purposes)
* Provide proper memory caps total size
* Update Esp.cpp
* SDMMC - Peripheral manager implementation (#8289)
* sdmmc periman implemented
* save pins when SOC_SDMMC_USE_IOMUX
* IDF release/v5.1 4bc762621d (#8292)
* Adds missing pinMode (#8312)
* Adds missing pinMode
The example code lacks a pinMode() to initialize the GPIO 0 (button). In Arduino Core 3.0.0, it prints an error message when trying to read a not initialized GPIO.
* Update KeyboardLogout.ino
Adds <buttonPin> to keep code standard
* Update KeyboardReprogram.ino
Adds <buttonPin> to keep code standard
* LEDC Fade implementation (#8338)
* fade API + pointer fixes
* Add fade api
* Add fade example
* update ledc docs
* remove unused variables
* fix path to example
* Adds USB to Peripheral Manager - Arduino Core 3.0.0 (#8335)
* ETHERNET - Peripheral manager implementation (#8297)
* Peripheral manager implemented
* remove unused variable
* Add all RMII pins
* fix typo
* Adds HardwareSerial to Peripheral Manager Arduino 3.0.0 (#8328)
* Do not limit ETHERNET in periman to only ESP32. SPI is also an option
* Initial support for ESP32-C6 (#8337)
* Add checks for SOC defines (#8351)
* Add checks for SOC defines
* Add SoC checks to BLE library
* fix i2c compilation error
* fix wrong placement of include
* add check to SPI library
* add check to USB library
* add checks to Wire library
* Feature/esp32h2 support (#8373)
* Initial support for ESP32H2
* Additional changes for ESP32H2
* Update libs for ESP32H2
* Fix flashing on ESP32-H2
* Fix GPIO Configs for ESP32-C6 and ESP32-H2
* Update Timer test sketch
* Fix upload flash parameters
* Use ets_write_char_uart instead of ets_printf in log_printfv
* Print full chip report when log level is sufficient (#8282)
* ESP32-C3 does not have ets_write_char_uart
* Fix BLE gap event name
* HW Testing - Pytest update (#8389)
* update tests requirements
* remove already handled components
* Update version of pytest
* Add missing ESP32-H2 to hil.yml
* Updated FreeRTOS names (#8418)
* HW Testing - ESP32-C6 + ESP32-H2 fixes (#8404)
* add C6/H2 to tests cfg.json
* remove ,
* workflow runs-on runner by matrix
* Add need for arduino tag to select runner
* Add cryptography to requirements.txt
* Removed duplicate TX1 define for H2 (#8402)
* Fix broken examples
* Fixes RMT filter & idle timing and setup (#8359)
* Fixes Filter and Idle parameter to uint32
* Fixes Filter and Idle setup
* Fixes it to 5.1Libs branch
* fix RMT CLK source and Filter API
* fixes missing ;
* fixes missing ;
* fixes RMT example
* IDF release/v5.1 a7b62bbcaf (#8438)
* Add workflow to build executables from python scripts (#8290)
* Add workflow to build executables from python scripts
* Push binary to tools
* Enable executable signing on Windows
* Update get.py
* Push binary to tools
* Try with multiple files
* Try more actions
* Try powershell
* Restore tools so they do not get rebuilt
* Finalize scripts
* Push binary to tools
* App rollback should be after PSRAM is initialized
* Correcting RX1 to GPIO4 and TX1 to GPIO5 to be consistent with documentation. Previous pin use works but is inconsistent with C6 docs.
* Fixes Memory Leak (#8486)
* fixes preprocessor test (#8485)
* fixes preprocessor test
When using `#define USE_SOFT_AP`
Change
`&& not USE_SOFT_AP` ==> `&& !defined(USE_SOFT_AP)`
* Adds any BLE capable device in WiFiProv.ino
Removing ESP32 restriction for BLE Provisioning.
* fix flash mode read out for C6
* Add option for custom partitions without restrictions
* SD_MMC update (#8298)
* Updated SD_MMC lib and examples
* Removed getter implementation and commented usage in examples
* squashed updates
* IDF release/v5.1 f0437b945f (#8599)
* Update package_esp32_index.template.json
* Fix printf format build error in BTAdvertisedDeviceSet.cpp
---------
Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com>
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Ha Thach <thach@tinyusb.org>
Co-authored-by: Martin Turski <quiret@vfemail.net>
Co-authored-by: raviypujar <raviypujar@gmail.com>
Co-authored-by: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Co-authored-by: Tomáš Pilný <34927466+PilnyTomas@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: Daniel Berlin <dberlin@dberlin.org>
Co-authored-by: Nima Askari (نیما عسکری) <nimaltd@yahoo.com>
Co-authored-by: rtpmsys <106180646+rtpmsys@users.noreply.github.com>
Co-authored-by: bytiful <55647551+bytiful@users.noreply.github.com>
Co-authored-by: tmfarrington <tmfarrington@users.noreply.github.com>
Co-authored-by: Krzysiek S <chris.streh@gmail.com>
Co-authored-by: surt <carl.olsson@gmail.com>
Co-authored-by: Max Scheffler <max.scheffler@pm.me>
Co-authored-by: Clemens Kirchgatterer <clemens@1541.org>
Co-authored-by: Peter Pan's Techland <twinkle-pirate@hotmail.com>
Co-authored-by: Roman <programmeofficemilkyway@gmail.com>
Co-authored-by: Eistee <Eistee82@users.noreply.github.com>
Co-authored-by: David McCurley <44048235+mrengineer7777@users.noreply.github.com>
Co-authored-by: Gaya3N25 <30388176+Gaya3N25@users.noreply.github.com>
Co-authored-by: renebohne <rene.bohne@gmail.com>
Co-authored-by: Olivér Remény <25034625+remenyo@users.noreply.github.com>
Co-authored-by: davidk88 <david.kotar@gmail.com>
Co-authored-by: Vojtěch Bartoška <76958047+VojtechBartoska@users.noreply.github.com>
Co-authored-by: James Armstrong <jamesarmstrong3@me.com>
Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
Co-authored-by: Peter G. Jensen <root@petergjoel.dk>
* adds extended HardwareSerial examples
* Adds new example with Serial RxTimeout
* adds and improves Serial onReceive expamples
* adjust includes CMake - UART example
* adjust includes CMake - UART example
* fixes CMake and CI
* adds ESP/Serial to CMakeList
* adds ESP/Serial to CMakeList
* fixes demo include
* fixes BREAK demo
* fixes onReceive demo
* Changes FIFO Full criteria
Changed the "1-by-1" Serial only when baud rate is 57600 or lower.
* example code replacement
* replaces functions in hal
* Changes UART ISR to only trigger on RX FIFO Full and timeout
* changes initial RX timeout
* Eliminates extra testing for _uart != NULL
* reconfiguration with "uartSetFastReading()"
* Adds new function "uartSetFastReading()"
* changed default onReceive() behaviour
* forces User callback in case of error
* Error Code Order
Set NO_ERROR as first error code, same as ESP_OK = 0
espressif/esp-idf / components/driver/include/driver/uart.h defines the API:
esp_err_t uart_set_pin(uart_port_t uart_num, int tx_io_num, int rx_io_num, int **rts_io_num**, int **cts_io_num**);
uartSetPins uses that api but alls it with swapped CTS/RTS pins as its API uses a different pin ordering:
uart_set_pin(uart->num, txPin, rxPin, **ctsPin**, **rtsPin**);
This fixes the wrong order in the function uartSetPins
Summary
Added compiler.warning_flags to all chips in platform.txt to reflect users setting of warning level output during compilation (set up in Arduino IDE preferences)
Impact
When a warning is set to none the compilation will no longer display warnings
Related links
Solves issue #6118
* Adds HardwareSerial::setTxBufferSize()
* uartBegin def fix
* checks TXBufferSize as defined in IDF
Makes sure that the buffer size will not cause a reset to the board.
* Removes double value in Rx/Tx Buffer Size
Keeps Rx/Tx buffer size as set, not doubling it. It makes the process more clear.
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* fixes setPins and begin to keep rx/tx unmodified
* adds Hardware Flow Control mode and CTS/RTS pin setting
* adds Hardware Flow Control mode and CTS/RTS pin setting
* adds Hardware Flow Control mode and CTS/RTS pin setting
* adds Hardware Flow Control mode and CTS/RTS pin setting
* Code Review
HardwareSerial flush() was returning before all data was sent out through serial port.
This is a problem to some RS485 libraries that depend on it to signaling.
This PR solves the issue by forcing it to block flush() until all data is sent.
This pull request contains a few fixes and improvements to the HWCDC implementation.
- Rework `HWCDC::write()` to accept unlimited data
- Add Semaphore to guard the TX Ring Buffer
- Add events support
- Remove unnecessary 1200bps touch for flashing over HWCDC
- Fix `HardwareSerial::setDebugOutput()` not resetting `putc` if the port is already selected, causing debug output to also show on HWCDC even when not selected.
## Summary
This PR is a complete reffactoring of UART Serial Hardware and respective HAL in order to use IDF instead of current Register manipulation approach.
It implements Arduino SerialEvent functionality.
Fix#5287Fix#5273Fix#5519Fix#5247Fix#5403Fix#5429Fix#5047Fix#5463Fix#5362Fix#5112Fix#5443
## Impact
It solves many reported issues related to UART.
It was tested and works fine for ESP32, ESP-S2 and ESP32-C3.
Fixes#5112
Call to pinMatrixInDetach() was changed from version 1.0.6 in version 2.0.0 injecting a bug as seen in cores/esp32/esp32-hal-uart.c
80418fadcf
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
This is very much still work in progress and much more will change before the final 2.0.0
Some APIs have changed. New libraries have been added. LittleFS included.
Co-authored-by: Seon Rozenblum <seonr@3sprockets.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Mike Dunston <m_dunston@comcast.net>
Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com>
Co-authored-by: Seon Rozenblum <seonr@3sprockets.com>
Co-authored-by: microDev <70126934+microDev1@users.noreply.github.com>
Co-authored-by: tobozo <tobozo@users.noreply.github.com>
Co-authored-by: bobobo1618 <bobobo1618@users.noreply.github.com>
Co-authored-by: lorol <lorolouis@gmail.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Limor "Ladyada" Fried <limor@ladyada.net>
Co-authored-by: Sweety <switi.mhaiske@espressif.com>
Co-authored-by: Loick MAHIEUX <loick111@gmail.com>
Co-authored-by: Larry Bernstone <lbernstone@gmail.com>
Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
Co-authored-by: 快乐的我531 <2302004040@qq.com>
Co-authored-by: chegewara <imperiaonline4@gmail.com>
Co-authored-by: Clemens Kirchgatterer <clemens@1541.org>
Co-authored-by: Aron Rubin <aronrubin@gmail.com>
Co-authored-by: Pete Lewis <601236+lewispg228@users.noreply.github.com>
