* RMT (featt): adds a new function to set EOT level after RMT writing
* RMT (feat): adds new feature to set the EOT level after writing RMT channel
* adds return value to rmtSetEOT()
* adds bool return to rmtSetEOT()
* adds return value to the rmtSetEOT() function
* FIX (rmt): fixes eot_level setting using flags in the TX structure
* RMT(feat): Create RMT_EndOfTransmissionState.ino example
* Update cores/esp32/esp32-hal-rmt.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Update cores/esp32/esp32-hal-rmt.c
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Update cores/esp32/esp32-hal-rmt.c
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Fix ESP32-Solo WDT on HTTP OTA update
* Fix ESP32-Solo WDT on HTTP OTA update
* Fix commits
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Fix ambiguous for TwoWire::requestFrom() methods.
* Remove TwoWire::begin(int) overload
Inside the function, this overload truncated the data type to a shorter one. This could break some users' hopes.
* Rewrite TwoWire with using HardwareI2C
- implement proposal https://github.com/espressif/arduino-esp32/pull/8818#issuecomment-1792191815
to bring the HARDWARE interface into compliance
* Fix TwoWire::end() return type.
* Fix TwoWire::setClock() return type.
* Fix no return statement in the TwoWire::requestFrom.
* fix(libraries/Wire): fix bad return-statement
Remove non-void values of the return-statements in function returning 'void'.
* style(libraries/Wire): replace tabs with spaces
* refactor(libraries/Wire): use slave without support
TwoWire::begin(uint8_t address) should be available without slave
support by SoC?
* refactor(libraries/Wire): remove unused variables
Compiler reports "Wire.cpp:393:15: error: variable 'err' set but not used [-Werror=unused-but-set-variable]".
* refactor(libraries/Wire): remove unused variables
Compiler reports "Wire.cpp:337:15: error: variable 'err' set but not used [-Werror=unused-but-set-variable]".
* fix(libraries/Wire): hide slave support elements
TwoWire::user_onRequest is used only in conjunction with slave support?
* refactor(libraries/Wire): remove temporary comment
* fix(libraries/Wire): restore an accidentally deleted implementation
TwoWire::endTransmission() was accidentally deleted from a cpp file.
* refactor(libraries/Wire): return return types
In TwoWire class return return types.
* fix(libraries/Wire): fix return type
* refactor(libraries/Wire): add return statement if slave isn't supported
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): fix indentation
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): fix indentation
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): fix indentation
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): remove unnecessary empty lines
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* feature(spi): Allow detach of some SPI pins
* fix(spi): Remove unnecessary check
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* feat(spi): Rename CS pin to SS to match Arduino standard
* fix(spi): Remove unnecessary checks
* remove lock from spiAttackMISO
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: me-no-dev <hristo@espressif.com>
* UART: fixes begin()
* Typo: fixes typos and some testing left over
* feat: fixes end()
* feat: adjust internal baurate
* feat: Changes CI [HardwareSerial]
[HardwareSerial]: Changes CI to match new HardwareSerial begin() and end()
* feat: fixes auto_baudrate_test
[uart]: fixes end(void) instead of end(bool)
* feat: adjust copyright year
[fix]: adjust commentary of the copyright year
* First stab ad simplyfing webserver auth and adding a handler.
* Tweaks after testing against docs and latest Library tree
* Add documentatin for callback handler
* Bodge to allow things to compile without the dependencies
* Remove dependency on sodium to make it compile with 4.4
* Fix hex conversion
* Move some common HEX functions into a static HEX class, remove those from MD5 and add some examples. This allows for the cleanup of various to/from HEX routines elsewhere.
* Remove some duplicated code
* Add simplfiied HEXBuilder under MD5Bulder to CMakefile.
* Update for 3.0.0 and QoL improvements
* Remove examples that depend on external libraries
* Skip H2 testing
* Formatting improvements
* Move builders examples to Utilities folder
* Fix indentation
* Add HashBuilder abstract class
* Add SHA1Builder
* Fix comment
* Fix whitespace
* Fix crashes and improve log messages
* Fix indentation for webserver
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* IPv6 for Arduino 3.0.0
* Fix warning in WifiUdp
* remove comment / formating
* Add zone to IPAddress and update WiFiUDP and WiFiGeneric
* Add from ip_addr_t conversion and better toString implementation
* Use constant for IPAddress offset
@sgryphon is this better?
* Combine hostByName to support both IPv6 and IPv4 results
* implement logic to use v6 dns only when global v6 address is assigned and remove IPv6Address
* Rename softAPenableIPv6
* Rename mDNS methods
* fix IPAddress method to work with const address
* Some cleanup and do not print zone in IPAddress
* rename WiFiMulti method
* Fix AP DHCPS not properly working on recent IDF
* Add option to print the zone at the end of IPv6
@TD-er
* remove log prints from hostByName
* Use correct array length for listing IPv6 addresses
* Implement some Tasmota requirements
Added constructor that takes `const ip_addr_t *`.
Added `addr_type()` getter
Organize header to highlight the Espressif additions to IPAddress
* add 'const' to IPAddress::addr_type()
* Fix WiFiUdp not updating mapped v4 address
* Update WiFiServer.cpp
---------
Co-authored-by: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Co-authored-by: s-hadinger <49731213+s-hadinger@users.noreply.github.com>
* feat(ipaddress): add support for ipv6 type, following arduinocore api
* feat(ipaddress): align with latest arduinocore api
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
1. Like a real keyboard, the USB interface descriptor will have an interface
subclass of boot and an interface protocol of keyboard. This will cause
some PC BIOS to send a SET PROTOCOL BOOT request to the device.
2. When the device sends reports to the host, if the host requested boot
protocol, don't send a report ID because boot protocol does not use report
IDs.
3. To work with some simple PC BIOS:
a. Use endpoint address of 1 for input and output.
b. Use separate reports for the shift key. These extra reports can be
disabled by calling USBHIDKeyboard::setShiftKeyReports(false).
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Turns out that disabling the periman APIs from remap has a negligible
effect on the source: the core is already excluded from remapping, as
are most of the libraries. It's also expected to be a private API not
exposed by default.
This patch removes it from both esp32-hal.h and io_pin_remap.h,
adjusting the relevant libraries.
* esp32-hal-bt.c free Bluetooth LE memory if CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY is set
BLE memory can be released if bluetooth-classic - only is requested
* tStart( add error output
* ble mem_release only for esp32
* disable BLE with BT_MODE define
* BluetoothSerial add begin()+disableBLE; add memrelease
* btStart with BT_MODE parameter
* beautification
* Update BluetoothSerial.cpp fix wrong merges
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* [pin_remap 1/3] platform: define ARDUINO_CORE_BUILD when building core files
* [pin_remap 2/3] core,libs: add pin remap hooks
* platform: remove previous build options if file is missing
"touch" would create the file if not present, but not delete its
contents if a previous run left the file in the build dir.
* platform: make debug_custom.json file customizable by board
* platform: fix default debug prefix
"debug.toolchain.prefix" must end with a dash, since only the tool name is
appended to this string.
The reason this is not a major issue is that the "debug_custom.json" file
(copied in the sketch directory when debugging is enabled) forces its own
prefix. And to make things more interesting, the "toolchainPrefix" entry
in that file should _not_ end with a dash.
* [pin_remap 3/3]: add Arduino Nano ESP32 board
* fix: periman: include it by default, add include guard
* fix: io_pin_remap: adjust for new perimap APIs
* fix: libraries: manually handled pin remapping files
Previously all libraries invoked either high-level APIs (transparently
remapped, like the user sketch) or low-level ESP-IDF calls (where the
remap to GPIO numbers had to be added manually).
Since 3.x, some of these are mixed (for example, periman* APIs are
remapped, while soc* are not). This must be handled by disabling the
automatic API remapping and making sure all calls use GPIO numbers.
* feat: show remapped pins in chip debug reports
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* Update RMT initialization code
- Commented out setting interrupt priority for both TX and RX configurations in the RMT initialization code.
* checks IDF version within RMT interrupt priority
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Extended bus types for peripheral manager
* add extra_type to peripheral manager
* Fix function call
* Fix check for no extra_type
* Add extra_type for SD and ETH CS pin
* added bus_num and bus_channel to pin structure
* update printPerimanInfo with new fields
* replaced setting bus to INIT with DetachPin call
* add defines for extra attributes
* use new required parameters in perimanSetPinBus
* function rename
* removed duplicate define
* Update print format
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Various ESP32-variants like the C6, H2, etc. differ in their used flash frequencies.
Also the maximum possible flash size wasn't handled in `magicFlashChipSize`
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* improve neopixel definition for all boards
* Improve NeoPixel definition for all boards
* neopixelWrite uses Peirpheral Manager now
The function can now be used for many GPIOs in the same sketch by using Peripheral Manager attach/detach, not being necesary to worry about initialization.
* improve error message
* check if pin is RGB_BUILTIN
* fixes boards that don't RGB_BUILTIN
* Serial as a #define
* Typo
* fixes USBCDC declaration
* Fixes Examples
* simplifies examples
* Adds USB Serial Events
* adds error msg when ESP32 is used with USB
* Fix Wire.setClock() causing assert
When Wire.setClock() is called after Wire.begin() an assert is triggered due to changes in clock calculations
* Fix typo
* Adds Analog Continuous mode API
* fix when stopping/starting ADC data are not complete
* Added example
* fix size check
* update frequency in example
* set buffer to NULL if error occurs
* add docs
* set buffer to null on error
* fix example
* update docs
* fix example
* change return value to bool type
* updated adc modes description in docs
* Add empty line at the end of sketch
