* Fix missing virtual declarations in Stream.h
Fixes some changes made in PR #10328
* Remove the virtual destructor as Print class has one
As pointed out by @JAndrassy
* Adds the ability to set the clock source for the LEDC
* feat(LEDC): Adjusting function names to more suitable
* feat(LEDC): Fix clock_source to static
* docs(ledc): Document ledc set and get clock source
* docs(ledc): Update ledcSetClockSource description
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Jan Prochazka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(timer): Typo - milis instead of millis.
* fix(doc0: format
fix CI error about format
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* fix(esp32): Fixed the hint for the builtin neopixleWrite() function
* change(esp32): Added neopixelWriteOrdered() function
* change(esp32): Added neopixelWriteOrdered() function
* change(esp32): Added neopixelWriteOrdered() function
* change(esp32): Added the possibility to specify LED color order
* change(esp32): Added the possibility to specify LED color order
* feat(rgbled): add license information
* feat(rgbled): add color order enum
* feat(rgbled): add color order feature
* feat(rgbled): change color order for lolin_s3_mini
* fix(rgbled): suffix
* fix(rgbled): suffix
* ci(pre-commit): Apply automatic fixes
* fix(rgbled): it lacks GRB case
Made GRB default + switch/case exceptions.
* fix(rgbled): add guard for rgb_led_color_order_t
If RGB_BUILTIN_LED_COLOR_ORDER is not defined, the type rgb_led_color_order_t won't be declared.
* fix(rgb-led): Implement rgbLedWriteOrdered()
* ci(pre-commit): Apply automatic fixes
* Remove const to allow changing the order
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: me-no-dev <hristo@espressif.com>
Problem detected with ESP32 and ESP32-S2 when the baudrate goes to 460600 bps.
REF_TICK (2MHz) seem not to work properly.
Limiting the use of REF_TICK for up to 205 Kbps.
* fix(uart): Sets XTAL as clock source for uart
C6 and H2 have problems after returning from light sleep. The baud rate seems to be off when APB is used as clock source.
This fix solves the issue using a steady clock source.
* fix(typo): Typo and commentaries
Adds C2 in the XTAL list.
* fix(uart): adjust get/set baudrate
Fixes the functions for reading/writing UART baudrate by using IDF functions instead of HAL/LL.
* fix(uart): uses REF_TICK for ESP32/S2
* fix(uart): esp32/s2 baudrate > 1MHz
Fixes the baudrate for ESP32 and ESP32-S2 when the baud rate is higher than 1MHz.
REF_TICK is just 2MHZ and can handle up to 1MHZ baudrate.
* fix(uart): rxTimeout minimum
Default RxTimeout changed to the minimum = 1.
When TICK_REF is used as clock source, this is mandatory,
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Prints the value of the chip features bitfield to printChipInfo() to facilitate debugging.
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* feat(ledc): Allow attaching multiple pins to 1 channel
* feat(ledc): Add ledcWriteChannel function
* feat(ledc): Print info about already set channel
* docs(ledc): Add ledcWriteChannel function and attach update
* feat(ledc): Add example and fixes
* feat(ledc): Remove commented code
* feat(ledc): Fix missing new line at end of file
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(uart): Set back Pin signal polarity
Fixes a problem related to inverting signal polarity back to normal after a previous inversion.
This shall set the correct polarity in Serial.begin().
* fix(uart): Remove useless commentary
Removes a commentary with a question about the inversing polarity function.
* fix(uart): Update comment
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* feat(rmt): Solve neopixel issue
if neopixelWrite() is used from different tasks/isr_callbacks, it may result in a concurrency problem and many detach/attach calls in sequence, but not in synch.
This commit avoids initializing the neopixel GPIO again and improves the respomse time of neopixelWrite().
* fix(xtal): Add a way to change the XTAL frequency
Add support for boards like SparkFun ESP32 Thing that use 26MHz XTAL
* ci(pre-commit): Apply automatic fixes
* feat(dbg): Print the XTAL frequency in the debug report
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(usb): Support the new USB IDF API
Required for the latest ESP-IDF release/v5.1
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* change(logging): Provide a default TAG name for USE_ESP_IDF_LOG
The ESP-IDF logging library has some nice features such as log
forwarding. esp32-hal-log.h has long supported the USE_ESP_IDF_LOG
macro, but due to subsequent changes, it requires a global TAG
preprocessor macro to be defined. The macro name is too generic and
just having a sane default would be preferable.
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(cdc): Disable SOF interrupt and CDC reset on begin()
* feat(jtag/hwcdc): uses SOF detection from IDF
Restores back IDF 5.1 SOF detection method in order to fix the HW CDC uploading process.
Enabling SOF mask in the ISR routine causes a problem with esptool uploading when using CDC/JTAG port.
* feat(jtag/hwcdc): uses SOF detection from IDF
Restores back IDF 5.1 SOF detection method in order to fix the HW CDC uploading process.
Enabling SOF mask in the ISR routine causes a problem with esptool uploading when using CDC/JTAG port.
* feat: revert include
This include is not necessary here.
Moving it back to the HWCDC.cpp file.
* feat: adding a necessary include
Adding the IDF 5.1 SOF check include file.
Necessary to make it compile. Moved from HWCDC.h file to here.
* feat: move function call to header file
* feat: Moved SOF function
* feat: Removed unused header file
* fix: Use correct SOF header file
* ci(pre-commit): Apply automatic fixes
* Small fixes for Debug prints on C3, C6 and H2
* fix(usb): Fix log prints
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
