* fix(psram): Init PSRAM before app_main to fix mmu_map
Makes sure that PSRAM is part of the map before app_main is called.
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
The pin remapping functions have to be called as early as possible in
the begin() function, to immediately convert the input parameters to the
GPIO numbers used everywhere in the core.
This issue has always been dormant since the introduction of pin
remapping in 2.x via 9b4622d, but was exposed by the proper pin muxing
support that is present in the 3.x core.
Move the pin remapping function calls earlier in the begin() function to
fix this issue.
The digitalPinToInterrupt() macro currently remaps the pin number to the
GPIO number. This is not necessary, as most users will then use the
returned value in attachInterrupt() or other similar API functions,
which already perform the same remapping.
The first half of the macro (the condition) does indeed require the
remapping to ensure the check operates on GPIO numbers.
Fixesespressif/arduino-esp32#10367.
* fix(esp32p4): Add missing touchpad definitions
* fix(esp32p4): Add missing target in SPI example
* fix(esp32p4): Start touch driver fix
* fix(esp32p4): Skip touch examples while it is not implemented
* fix(esp32p4): Add missing analog pin definitions
* refactor(formatting): Fix formatting that was broken in P4 PR
* fix(openthread): Add missing targets to skip
* fix(esp32p4): Skip ethernet sketches
* fix(esp32p4): Disable periman test while touch is not implemented
* fix(esp32p4): Disable touch test while touch is not implemented
* fix(esp32p4): Fix UART test
* fix(esp32p4): Skip Wi-Fi test
* fix(esp32): Skip unsupported example
* fix(esp32p4): Fix skip files
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* Fix missing virtual declarations in Stream.h
Fixes some changes made in PR #10328
* Remove the virtual destructor as Print class has one
As pointed out by @JAndrassy
* Adds the ability to set the clock source for the LEDC
* feat(LEDC): Adjusting function names to more suitable
* feat(LEDC): Fix clock_source to static
* docs(ledc): Document ledc set and get clock source
* docs(ledc): Update ledcSetClockSource description
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Jan Prochazka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(timer): Typo - milis instead of millis.
* fix(doc0: format
fix CI error about format
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* fix(esp32): Fixed the hint for the builtin neopixleWrite() function
* change(esp32): Added neopixelWriteOrdered() function
* change(esp32): Added neopixelWriteOrdered() function
* change(esp32): Added neopixelWriteOrdered() function
* change(esp32): Added the possibility to specify LED color order
* change(esp32): Added the possibility to specify LED color order
* feat(rgbled): add license information
* feat(rgbled): add color order enum
* feat(rgbled): add color order feature
* feat(rgbled): change color order for lolin_s3_mini
* fix(rgbled): suffix
* fix(rgbled): suffix
* ci(pre-commit): Apply automatic fixes
* fix(rgbled): it lacks GRB case
Made GRB default + switch/case exceptions.
* fix(rgbled): add guard for rgb_led_color_order_t
If RGB_BUILTIN_LED_COLOR_ORDER is not defined, the type rgb_led_color_order_t won't be declared.
* fix(rgb-led): Implement rgbLedWriteOrdered()
* ci(pre-commit): Apply automatic fixes
* Remove const to allow changing the order
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: me-no-dev <hristo@espressif.com>
Problem detected with ESP32 and ESP32-S2 when the baudrate goes to 460600 bps.
REF_TICK (2MHz) seem not to work properly.
Limiting the use of REF_TICK for up to 205 Kbps.
* fix(uart): Sets XTAL as clock source for uart
C6 and H2 have problems after returning from light sleep. The baud rate seems to be off when APB is used as clock source.
This fix solves the issue using a steady clock source.
* fix(typo): Typo and commentaries
Adds C2 in the XTAL list.
* fix(uart): adjust get/set baudrate
Fixes the functions for reading/writing UART baudrate by using IDF functions instead of HAL/LL.
* fix(uart): uses REF_TICK for ESP32/S2
* fix(uart): esp32/s2 baudrate > 1MHz
Fixes the baudrate for ESP32 and ESP32-S2 when the baud rate is higher than 1MHz.
REF_TICK is just 2MHZ and can handle up to 1MHZ baudrate.
* fix(uart): rxTimeout minimum
Default RxTimeout changed to the minimum = 1.
When TICK_REF is used as clock source, this is mandatory,
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Prints the value of the chip features bitfield to printChipInfo() to facilitate debugging.
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* feat(ledc): Allow attaching multiple pins to 1 channel
* feat(ledc): Add ledcWriteChannel function
* feat(ledc): Print info about already set channel
* docs(ledc): Add ledcWriteChannel function and attach update
* feat(ledc): Add example and fixes
* feat(ledc): Remove commented code
* feat(ledc): Fix missing new line at end of file
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(uart): Set back Pin signal polarity
Fixes a problem related to inverting signal polarity back to normal after a previous inversion.
This shall set the correct polarity in Serial.begin().
* fix(uart): Remove useless commentary
Removes a commentary with a question about the inversing polarity function.
* fix(uart): Update comment
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* feat(rmt): Solve neopixel issue
if neopixelWrite() is used from different tasks/isr_callbacks, it may result in a concurrency problem and many detach/attach calls in sequence, but not in synch.
This commit avoids initializing the neopixel GPIO again and improves the respomse time of neopixelWrite().
* fix(xtal): Add a way to change the XTAL frequency
Add support for boards like SparkFun ESP32 Thing that use 26MHz XTAL
* ci(pre-commit): Apply automatic fixes
* feat(dbg): Print the XTAL frequency in the debug report
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(usb): Support the new USB IDF API
Required for the latest ESP-IDF release/v5.1
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* change(logging): Provide a default TAG name for USE_ESP_IDF_LOG
The ESP-IDF logging library has some nice features such as log
forwarding. esp32-hal-log.h has long supported the USE_ESP_IDF_LOG
macro, but due to subsequent changes, it requires a global TAG
preprocessor macro to be defined. The macro name is too generic and
just having a sane default would be preferable.
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(cdc): Disable SOF interrupt and CDC reset on begin()
* feat(jtag/hwcdc): uses SOF detection from IDF
Restores back IDF 5.1 SOF detection method in order to fix the HW CDC uploading process.
Enabling SOF mask in the ISR routine causes a problem with esptool uploading when using CDC/JTAG port.
* feat(jtag/hwcdc): uses SOF detection from IDF
Restores back IDF 5.1 SOF detection method in order to fix the HW CDC uploading process.
Enabling SOF mask in the ISR routine causes a problem with esptool uploading when using CDC/JTAG port.
* feat: revert include
This include is not necessary here.
Moving it back to the HWCDC.cpp file.
* feat: adding a necessary include
Adding the IDF 5.1 SOF check include file.
Necessary to make it compile. Moved from HWCDC.h file to here.
* feat: move function call to header file
* feat: Moved SOF function
* feat: Removed unused header file
* fix: Use correct SOF header file
* ci(pre-commit): Apply automatic fixes
* Small fixes for Debug prints on C3, C6 and H2
* fix(usb): Fix log prints
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* IDF release/v5.1 01b912a9e5
* Fix USB OTG Init on new IDF
* Delete libraries/TFLiteMicro/examples/micro_speech directory
Done in order to fix a CI problem created by an entire folder that was removed in original Library Repository.
* IDF release/v5.1 442a798083
* Update esp32-hal-tinyusb.c
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* (feat)usbmsc: Add is_writable function
Add is_writable function to the USBMSC class.
Allows USBMSC to be mounted in read-only mode.
* Update USBMSC.ino
Changes to USB Mass Storage (MSC) example code in Arduino USB library
* Added MSC.isWritable(true) line to set the disk as writable
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat (hwcdc): ports changes made in 2.0.15
Ports many changes, fixes and improvements made in 2.0.15:
- correct use of timeout
- avoids problems with CDC ISR not reading data
- fixes problems with transmitting many bytes to USB Host
- changes how USB SOF and CDC connection is detected
* feat (HWCDC) : port 2.0.15
Changed header for a few functions.
* feat (HWCDC): port 2.0.15 upwards
Fixes include file that is not necessary any more.
- SOF is used directly now.
* fix (HWCDC): removes left over
Removes a left over function from previous 3.0.0 code.
- just removing unused code.
* ci(pre-commit): Apply automatic fixes
* fix: typo and commentaries
This fixes a few commentaries.
Just a typo error.
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* make digitalRead() for RGB_BUILTIN work
Standard Arduino-Way of blinking a LED can be the shortest with:
void loop() {
static uint32_t ledticker = 0;
if (millis() - ledticker > 1000) {
ledticker = millis();
digitalWrite(RGB_BUILTIN, !digitalRead(RGB_BUILTIN));
}
}
Worked with the old LED_BUILTIN on Pin 2, now even works with Pin 48/neopixel.
* Add: make digitalRead() for RGB_BUILTIN work
Standard Arduino-Way of blinking a LED can be the shortest with:
void loop() {
static uint32_t ledticker = 0;
if (millis() - ledticker > 1000) {
ledticker = millis();
digitalWrite(RGB_BUILTIN, !digitalRead(RGB_BUILTIN));
}
}
Worked with the old LED_BUILTIN on Pin 2, now even works with Pin 48/neopixel.
(Retry. Didn't sync my local sources. Sorry.)
* Added new classes MacAddress and MacAddress8
In the same style as class IPAddress.
Based on Apache License.
* Update MacAddress8.h
* Added Printable, constructor and extra operators
Added a few changes to make it closer to IPAddress Class implementation.
* Added construtor and Printable
Makes it closer to IPAddress Class implementation
* Fixes include Printable
* Update MacAddress.cpp
* Update MacAddress.h
* Update MacAddress.cpp
* Added Printable
* Added Printble and some more operators
* Cleanup and bounds checking
Moved implementation details .h->.cpp. Added bounds checking on index operators. Added constructor to MacAddress8 to match MacAddress.
* Fixed printTo
Chars must be uppercase to match toString() and pass test
* feat(MAC): Rework API to support both 6+8 bytes MacAddress
* feat(MAC): Remove MacAddress8.h file
* fix(MAC): Remove comment + reorder lines
* Update toString function with single buf and return
* Fix buffer size for toString
---------
Co-authored-by: David McCurley <44048235+mrengineer7777@users.noreply.github.com>
Co-authored-by: David McCurley <mrengineer02@gmail.com>
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* fix: HWCDC pin number
Fixes HW Serial pin setup.
The pins were set up to the wrong value and it could not be correctly configured and used.
* fix: PHY initialization
Fixes the PHY initialization.
After detaching the pin and ending the HW Serial, a new begin() wouldn't start the CDC because it lacked the proper PHY initialization.
* fix: crashing end()
Fixes a crash when calling end()
end() treminanates the `tx_ring_buf` but it was not tested for NULL in the ISR and in the cdc0_write_char() causing a crash if those are used. This depends on events and happens eventually.
* reduces number of debug messages
* fix git stash/commit added lines
* fixes usb_phy_ll include and call
* roll back
* solves HWSerial initialization
* fixes C6|H2 issue
issue with `if(Serial)` not working always
* github commit problem
* fixes
Begin() may undo a setpins() that has set RTS and/or CTS pin.
This pins are only changed with RTS and CTS.
setpins() can be called after or before begin()
when called before, begin() shall not change those pins.
* feat(uart): setBufferSize
It makes sure that setting TX buffer size will match availableForWrite() response. It also sets the buffer to the minimum instead of doing nothing and returning an error.
For RX Buffer, it sets the minimum and also don't return an error.
This makes the APIs better and easy to understand its results.
* feat: sets TX buffer
This will allow to set TX buffer to a minimum with no error message.
It also makes it works as in the Arduino API specification that is to return the buffer available space. In ESP32 case it will be the minmum the HW TX FIFO size of 128 bytes.
* feat: adjust availableForWrite
This change will make sure that if no TX Ringbuffer is used, it will return the UART FIFO available space. Otherwise, it will return the Ringbuffer available space, as defined in the Arduino especification.
* feat(hwcdc): fix delay
Fixes delay when CDC is disconnected. At this time is only fixes it when USB cable is unplugged.
* feat(hwcdc): fix delay
fixes delay when CDC is not connected. It was only considering when the USB cable was not plugged.
* feat(hwcdc): add 2 methods
Adds 2 new methods:
- isPlugged() will return true when USB cable is plugged, false otherwise.
- isConnected() will return true when USB CDC is connected to a application in the USB Host side and communication is stablished.
* feat(hwcdc): adjusts APIs
Fixes the example to use the new added APIs for checking if USB cable is plugged and for checking if CDC is connected.
* fixes api declaration
* fixes API declaration
* feat(hw_cdc):fixes the hardware cdc jtag plugged/unplugged status
This will use a new IDF 5.1 feature to detect if the USB HW CDC is plugged or not. This can be checked testing HWCDCSerial.
It also fixes issues related to timeout or delays while writing to the HW Serial when USB is unplugged.
* feat(usb): Creates HWSerial_Events.ino example
* feat: adds .skip.esp32
Skips the ESP32 SoC test given that it has no USB
* feat: adds .skip.esp32s2
Skips the ESP32S2 because it has no HW CDC JTAG interface
* fix: fixes issues with Ubuntu CI
Only compiles the example in case it is using Hardware CD and JTAG mode.
* feat(serialcdc): non block functions
modifies write and flush to do not clock in case CDC host is not connected to the CDC client from the C3/S3/C6/H2
* fix(HWCDC): changes made demands testing for CDC ON BOOT
* feat(hwcdc): Improves HWSerial_Events.ino
Improves the example by adding more information about USB being plugged and CDC being connected.
* feat(hwcdc): solves CDC connection issue
Detects correctly when CDC is or not connected.
Deals with USB unplugged while the sketch is printing to CDD.
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Update cores/esp32/HWCDC.cpp
* Apply suggestions from code review
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Fix: adds RMT new function to io_pin_remap list
* Fix: adds rmtSetEOT(int pin, uint8_t EOT_Level) to the new API list
* Fix: error in macro definition - left over from function signature
* RMT (featt): adds a new function to set EOT level after RMT writing
* RMT (feat): adds new feature to set the EOT level after writing RMT channel
* adds return value to rmtSetEOT()
* adds bool return to rmtSetEOT()
* adds return value to the rmtSetEOT() function
* FIX (rmt): fixes eot_level setting using flags in the TX structure
* RMT(feat): Create RMT_EndOfTransmissionState.ino example
* Update cores/esp32/esp32-hal-rmt.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Update cores/esp32/esp32-hal-rmt.c
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Update cores/esp32/esp32-hal-rmt.c
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Fix ESP32-Solo WDT on HTTP OTA update
* Fix ESP32-Solo WDT on HTTP OTA update
* Fix commits
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Fix ambiguous for TwoWire::requestFrom() methods.
* Remove TwoWire::begin(int) overload
Inside the function, this overload truncated the data type to a shorter one. This could break some users' hopes.
* Rewrite TwoWire with using HardwareI2C
- implement proposal https://github.com/espressif/arduino-esp32/pull/8818#issuecomment-1792191815
to bring the HARDWARE interface into compliance
* Fix TwoWire::end() return type.
* Fix TwoWire::setClock() return type.
* Fix no return statement in the TwoWire::requestFrom.
* fix(libraries/Wire): fix bad return-statement
Remove non-void values of the return-statements in function returning 'void'.
* style(libraries/Wire): replace tabs with spaces
* refactor(libraries/Wire): use slave without support
TwoWire::begin(uint8_t address) should be available without slave
support by SoC?
* refactor(libraries/Wire): remove unused variables
Compiler reports "Wire.cpp:393:15: error: variable 'err' set but not used [-Werror=unused-but-set-variable]".
* refactor(libraries/Wire): remove unused variables
Compiler reports "Wire.cpp:337:15: error: variable 'err' set but not used [-Werror=unused-but-set-variable]".
* fix(libraries/Wire): hide slave support elements
TwoWire::user_onRequest is used only in conjunction with slave support?
* refactor(libraries/Wire): remove temporary comment
* fix(libraries/Wire): restore an accidentally deleted implementation
TwoWire::endTransmission() was accidentally deleted from a cpp file.
* refactor(libraries/Wire): return return types
In TwoWire class return return types.
* fix(libraries/Wire): fix return type
* refactor(libraries/Wire): add return statement if slave isn't supported
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): fix indentation
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): fix indentation
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): fix indentation
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): remove unnecessary empty lines
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
