* fix(timer): Typo - milis instead of millis.
* fix(doc0: format
fix CI error about format
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* fix(esp32): Fixed the hint for the builtin neopixleWrite() function
* change(esp32): Added neopixelWriteOrdered() function
* change(esp32): Added neopixelWriteOrdered() function
* change(esp32): Added neopixelWriteOrdered() function
* change(esp32): Added the possibility to specify LED color order
* change(esp32): Added the possibility to specify LED color order
* feat(rgbled): add license information
* feat(rgbled): add color order enum
* feat(rgbled): add color order feature
* feat(rgbled): change color order for lolin_s3_mini
* fix(rgbled): suffix
* fix(rgbled): suffix
* ci(pre-commit): Apply automatic fixes
* fix(rgbled): it lacks GRB case
Made GRB default + switch/case exceptions.
* fix(rgbled): add guard for rgb_led_color_order_t
If RGB_BUILTIN_LED_COLOR_ORDER is not defined, the type rgb_led_color_order_t won't be declared.
* fix(rgb-led): Implement rgbLedWriteOrdered()
* ci(pre-commit): Apply automatic fixes
* Remove const to allow changing the order
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: me-no-dev <hristo@espressif.com>
Problem detected with ESP32 and ESP32-S2 when the baudrate goes to 460600 bps.
REF_TICK (2MHz) seem not to work properly.
Limiting the use of REF_TICK for up to 205 Kbps.
* fix(uart): Sets XTAL as clock source for uart
C6 and H2 have problems after returning from light sleep. The baud rate seems to be off when APB is used as clock source.
This fix solves the issue using a steady clock source.
* fix(typo): Typo and commentaries
Adds C2 in the XTAL list.
* fix(uart): adjust get/set baudrate
Fixes the functions for reading/writing UART baudrate by using IDF functions instead of HAL/LL.
* fix(uart): uses REF_TICK for ESP32/S2
* fix(uart): esp32/s2 baudrate > 1MHz
Fixes the baudrate for ESP32 and ESP32-S2 when the baud rate is higher than 1MHz.
REF_TICK is just 2MHZ and can handle up to 1MHZ baudrate.
* fix(uart): rxTimeout minimum
Default RxTimeout changed to the minimum = 1.
When TICK_REF is used as clock source, this is mandatory,
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Prints the value of the chip features bitfield to printChipInfo() to facilitate debugging.
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* feat(ledc): Allow attaching multiple pins to 1 channel
* feat(ledc): Add ledcWriteChannel function
* feat(ledc): Print info about already set channel
* docs(ledc): Add ledcWriteChannel function and attach update
* feat(ledc): Add example and fixes
* feat(ledc): Remove commented code
* feat(ledc): Fix missing new line at end of file
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(uart): Set back Pin signal polarity
Fixes a problem related to inverting signal polarity back to normal after a previous inversion.
This shall set the correct polarity in Serial.begin().
* fix(uart): Remove useless commentary
Removes a commentary with a question about the inversing polarity function.
* fix(uart): Update comment
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* feat(rmt): Solve neopixel issue
if neopixelWrite() is used from different tasks/isr_callbacks, it may result in a concurrency problem and many detach/attach calls in sequence, but not in synch.
This commit avoids initializing the neopixel GPIO again and improves the respomse time of neopixelWrite().
* fix(xtal): Add a way to change the XTAL frequency
Add support for boards like SparkFun ESP32 Thing that use 26MHz XTAL
* ci(pre-commit): Apply automatic fixes
* feat(dbg): Print the XTAL frequency in the debug report
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(usb): Support the new USB IDF API
Required for the latest ESP-IDF release/v5.1
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* change(logging): Provide a default TAG name for USE_ESP_IDF_LOG
The ESP-IDF logging library has some nice features such as log
forwarding. esp32-hal-log.h has long supported the USE_ESP_IDF_LOG
macro, but due to subsequent changes, it requires a global TAG
preprocessor macro to be defined. The macro name is too generic and
just having a sane default would be preferable.
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(cdc): Disable SOF interrupt and CDC reset on begin()
* feat(jtag/hwcdc): uses SOF detection from IDF
Restores back IDF 5.1 SOF detection method in order to fix the HW CDC uploading process.
Enabling SOF mask in the ISR routine causes a problem with esptool uploading when using CDC/JTAG port.
* feat(jtag/hwcdc): uses SOF detection from IDF
Restores back IDF 5.1 SOF detection method in order to fix the HW CDC uploading process.
Enabling SOF mask in the ISR routine causes a problem with esptool uploading when using CDC/JTAG port.
* feat: revert include
This include is not necessary here.
Moving it back to the HWCDC.cpp file.
* feat: adding a necessary include
Adding the IDF 5.1 SOF check include file.
Necessary to make it compile. Moved from HWCDC.h file to here.
* feat: move function call to header file
* feat: Moved SOF function
* feat: Removed unused header file
* fix: Use correct SOF header file
* ci(pre-commit): Apply automatic fixes
* Small fixes for Debug prints on C3, C6 and H2
* fix(usb): Fix log prints
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* IDF release/v5.1 01b912a9e5
* Fix USB OTG Init on new IDF
* Delete libraries/TFLiteMicro/examples/micro_speech directory
Done in order to fix a CI problem created by an entire folder that was removed in original Library Repository.
* IDF release/v5.1 442a798083
* Update esp32-hal-tinyusb.c
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* (feat)usbmsc: Add is_writable function
Add is_writable function to the USBMSC class.
Allows USBMSC to be mounted in read-only mode.
* Update USBMSC.ino
Changes to USB Mass Storage (MSC) example code in Arduino USB library
* Added MSC.isWritable(true) line to set the disk as writable
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat (hwcdc): ports changes made in 2.0.15
Ports many changes, fixes and improvements made in 2.0.15:
- correct use of timeout
- avoids problems with CDC ISR not reading data
- fixes problems with transmitting many bytes to USB Host
- changes how USB SOF and CDC connection is detected
* feat (HWCDC) : port 2.0.15
Changed header for a few functions.
* feat (HWCDC): port 2.0.15 upwards
Fixes include file that is not necessary any more.
- SOF is used directly now.
* fix (HWCDC): removes left over
Removes a left over function from previous 3.0.0 code.
- just removing unused code.
* ci(pre-commit): Apply automatic fixes
* fix: typo and commentaries
This fixes a few commentaries.
Just a typo error.
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* make digitalRead() for RGB_BUILTIN work
Standard Arduino-Way of blinking a LED can be the shortest with:
void loop() {
static uint32_t ledticker = 0;
if (millis() - ledticker > 1000) {
ledticker = millis();
digitalWrite(RGB_BUILTIN, !digitalRead(RGB_BUILTIN));
}
}
Worked with the old LED_BUILTIN on Pin 2, now even works with Pin 48/neopixel.
* Add: make digitalRead() for RGB_BUILTIN work
Standard Arduino-Way of blinking a LED can be the shortest with:
void loop() {
static uint32_t ledticker = 0;
if (millis() - ledticker > 1000) {
ledticker = millis();
digitalWrite(RGB_BUILTIN, !digitalRead(RGB_BUILTIN));
}
}
Worked with the old LED_BUILTIN on Pin 2, now even works with Pin 48/neopixel.
(Retry. Didn't sync my local sources. Sorry.)
* Added new classes MacAddress and MacAddress8
In the same style as class IPAddress.
Based on Apache License.
* Update MacAddress8.h
* Added Printable, constructor and extra operators
Added a few changes to make it closer to IPAddress Class implementation.
* Added construtor and Printable
Makes it closer to IPAddress Class implementation
* Fixes include Printable
* Update MacAddress.cpp
* Update MacAddress.h
* Update MacAddress.cpp
* Added Printable
* Added Printble and some more operators
* Cleanup and bounds checking
Moved implementation details .h->.cpp. Added bounds checking on index operators. Added constructor to MacAddress8 to match MacAddress.
* Fixed printTo
Chars must be uppercase to match toString() and pass test
* feat(MAC): Rework API to support both 6+8 bytes MacAddress
* feat(MAC): Remove MacAddress8.h file
* fix(MAC): Remove comment + reorder lines
* Update toString function with single buf and return
* Fix buffer size for toString
---------
Co-authored-by: David McCurley <44048235+mrengineer7777@users.noreply.github.com>
Co-authored-by: David McCurley <mrengineer02@gmail.com>
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* fix: HWCDC pin number
Fixes HW Serial pin setup.
The pins were set up to the wrong value and it could not be correctly configured and used.
* fix: PHY initialization
Fixes the PHY initialization.
After detaching the pin and ending the HW Serial, a new begin() wouldn't start the CDC because it lacked the proper PHY initialization.
* fix: crashing end()
Fixes a crash when calling end()
end() treminanates the `tx_ring_buf` but it was not tested for NULL in the ISR and in the cdc0_write_char() causing a crash if those are used. This depends on events and happens eventually.
* reduces number of debug messages
* fix git stash/commit added lines
* fixes usb_phy_ll include and call
* roll back
* solves HWSerial initialization
* fixes C6|H2 issue
issue with `if(Serial)` not working always
* github commit problem
* fixes
Begin() may undo a setpins() that has set RTS and/or CTS pin.
This pins are only changed with RTS and CTS.
setpins() can be called after or before begin()
when called before, begin() shall not change those pins.
