* feat(uart): fixes loopback function after IDF changes
IDF 5.4.1 has added a new function called uart_release_pin() that is called whenever new pins are set or when uart driver is deleted.
This has a side effect that causes RX pin to never work again with the loopback function. Other changes also have removed some GPIO setup that was necessary for the GPIO loopback mode work.
The PR forces a full RX Pin setup in order to make it work in GPIO Matrix with Loopback TX Signal
* feat(uart): adds missing include file
* feat(uart): removes not necessary part of the code
* fix(uart): commentaries style fix
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Commit 0773dd7619 from PR #10841 broke pin
remapping by moving its application too early in the definition process.
This commit restores the original order of includes, ensuring that pin
remapping is applied correctly.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Co-authored-by: Sugar Glider <rodrigo.garcia@espressif.com>
* Add files via upload
* Add files via upload
* Update SPI.h
* Update esp32-hal-spi.c
renamed invert_out to ss_invert to be more intuitive
* Update esp32-hal-spi.h
Removed the out from the function name spiSSInvertout.
* Update SPI.cpp
Removed the out from the function name spiSSInvertout.
* Update cores/esp32/esp32-hal-spi.c
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(logging): Arduino log redirection
* fix(uart): log will only use ets_printf() for uart and cdc
* feat(uart_cdc): when CDC is logging, UART is silent
* feat(uart_cdc): when CDC is logging, UART is silent
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Sugar Glider <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* Add an option to force IDF's default UART clock source
* feat(uart): adds function to set clock source
* feat(uart): add uart clock source selection method
* feat(uart): add uart hall function to set the uart clock source
* feat(uart): add function to set the uart clock source
* feat(uart): set clock source as necessary
* fix(uart): missing class qualifier declaration
* fix(uart): fixing a typo and non LP UART SoC clk src setting
* fix(uart): variable name, typo error
* fix(uart): retores previous identation reducing diff load
* feat(uart): apply CONFIG_ARDUINO_SERIAL_FORCE_IDF_DEFAULT_CLOCK_SOURCE to LP UART
* feat(uart): adds option for UART_CLK_SRC_DEFAULT
* feat(uart): adds option for setting default uart clock source from IDF
* feat(uart): documents UART_CLK_SRC_DEFAULT as option in header file
* feat(uart): documents using the IDF default uart clock source
* fix(uart): type missmatch may cause error
* fix(uart): type missmatch may cause error, test for -1
* feat(uart): considering both HP and LP default uart clock source
* feat(uart): improve the defined value for UART_CLK_SRC_DEFAULT
* fix(uart): using uart_sclk_t as hal level parameter
* feat(uart): apply default LP uart clock source
* fix(uart): considers that it may set the LP UART as well
* feat(uart): using UART SCLK enum for uart clock source values
* fix(uart): using UART_CLK_SRC_RTC now
* fix(uart): documentation using UART_CLK_SRC_RTC now
* fix(uart): fix old commentary that is not correct anymore
* fix(uart): wrong identation in code line
* fix(uart): using uart number as argument instead
* fix(uart): using uart number as argument in setClockSource()
* fix(uart): using uart number as parameter in uartSetClockSource()
* feat(uart): update Kconfig.projbuild to reflect functionality
* feat(uart): removing Kconfig.projbuild option to force default clk src
* feat(uart): removes kconfig option to force uart default clk src
* fix(uart): replacing #if #endif by #if #elif #endif for the same enum
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Sugar Glider <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(uart): adds a function to calculate maximum valid rx timeout
* fix(uart): check uart rx timeout value and log an error msg
* fix(uart): changes log message to a more clear one
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(uart): uart begin does not set the clock source when baudrate changes
* fix(uart): returns success on baud rate change operation
* fix(code): uart typo - missing ( in the code
* fix(uart): replacing mutex lock to avoid double lock
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(gpio): allows mixing digital and analog read/write operations
* fix(gpio): simple mistake in calling __pinMode() fnuction
* fix(gpio): simple mistake in calling __pinMode() fnuction
* feat(gpio): update the log message to tell the solution for the error.
* feat(gpio): warn user about digitalRead() used with non GPIO pin
* fix(gpio): wrong peripheral manager test case
* feat(uart): adds low power uart peripheral into hardware serial class
* feat(lp_uart): pin setting for lp uart plus esp32p4 fixes
* fix(uart): keeps the test as it was before.
* fix(uart): updates the copyright year reference
* fix(uart): updates the copyright year reference
* feat(lp_uart): supports any number of lp uart port for the future
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(i2c): Add support for the new I2C driver in IDF v5.4
* fix(build): Add the new driver to CMakeLists.txt
* fix(i2c): Guard sleep retention
Not all chips can restore I2C bus after light sleep
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Fixes: #10938
Keep allocated memory when rhs fits
Use case: Appending to a String with pre-allocated memory (e.g. from `reserve()`)
No need to move 0-termination char in String::move
Simplify calls to String::copy
A lot of the same checks were done before calling `copy()` which should be done in the `copy()` function itself.
String::copy() Should not copy more than given length
Fix potential out of range in String::concat
There is no prerequisite the given array has to be a 0-terminated char array.
So we should only copy the length that has been given.
The `setLen()` function will make sure the internal string is 0-terminated.
So no need to dangerously assume there will be 1 more byte to copy
Allow String::concat(const String &s) with s.buffer() == nullptr
When constructing a String object, the internal buffer is a nullptr.
However concatenating this to another String would return `false` while this is perfectly fine to do.
* feat(cdc): Add support for two CDC ports at once
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(chip): Add definition for BOOT_PIN for all chips
For use in sketches as default button
* fix(core): Make BOOT_PIN static
* fix(hal): BOOT_PIN should always be defined
