* Moved and renamed example ESP32/FreeRTOS to MultiThreading/BasicMultiThreading
* Added dummy files
* Modified original example
* Fixed BasicMultiThreading.ino
* Added Example demonstrating use of queues
* Extended info in BasicMultiThreading
* Renamed Queues to singular Queue
* Added Mutex example
* Added Semaphore example
* Moved info from example to README
* Moved doc from Mutex to README
* Added Queue README
* Removed unecesary text
* Fixed grammar
* Increased stack size for Sempahore example
* Added headers into .ino files
* Added word Example at the end of title in README
* removed unused line
* Added forgotten README
* Modified BasicMultiThreading example
* Added missing S3 entry in README
* moved location
[ESP32: SDMMCFS::begin hardcodes the usage of slot 1, only check if the pins match slot 1 pins.]
setPins() was testing pins D1, D2 and D3 all against D1 ... fine in 1 pin mode when all are -1 not so much if you're trying to get 4 pin mode working.
I now see this function doesn't really do anything on the ESP32...accept now correctly checks that you are trying to use the slot 1 pins.
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Update WiFiClient.cpp
This change will allow specifying connect timeouts below 1 second. Without this change, if connect timeouts under 1 second are given, the connect defaults to 0ms and fails.
This will also allow timeouts in fractions of seconds, e.g. 1500ms. Without this change, connect timeouts are truncated to full second increments.
* Make parameter timeout_ms clear
* Change connection timeout_ms name for clarity
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Fixes BLE data printing
BLE data has no '\0' terminator, therefore it can't be printed as a regular C string.
This fix just prints the BLE data based on its length.
* Simplify printing to a single call
* Modified WiFiClient example to use thingspeak instead of non-functionig sparkfun
* Moved instructions to README
* Fixed spelling
* Added link to S3 datasheet
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Fixed issue where esp32 won't reconnect to WiFi AP if the AP was restarted
* Added the autoReconnect condition and removed the reconnect reason
* Chenges on the WiFi reconnection and added new example
* Added new line at the end
* Changes reverted with some minor changes. New example remained
* Changes reverted and sync
Co-authored-by: pedro.minatel <pedro.minatel@espressif.com>
* ESP Insights: Added library support
* ESP Insights: Added Examples
* ESP Insights: Added custom partitions file
* ESP Insights: Added API documentation.
* Added recipe and script to create Insights package
* Updated ESP Insights examples.
* Changed Insights Firmware package output directory
* Changed license to include SPDX license
* Fix Insights package for Windows
* Updated .exe of insights script
* Added coredump partition to all schemes
* Updated header files of Insights diagnostics
* hotfix: Added elf-sha256-offset flag in elf2bin
builder
* Update API to be more Arduino-like and partitions offsets
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* adds extended HardwareSerial examples
* Adds new example with Serial RxTimeout
* adds and improves Serial onReceive expamples
* adjust includes CMake - UART example
* adjust includes CMake - UART example
* fixes CMake and CI
* adds ESP/Serial to CMakeList
* adds ESP/Serial to CMakeList
* fixes demo include
* fixes BREAK demo
* fixes onReceive demo
* Changes FIFO Full criteria
Changed the "1-by-1" Serial only when baud rate is 57600 or lower.
* example code replacement
* replaces functions in hal
* Update `WiFiScan` example to show more useful data
* Add channel to output.
* Add type of encryption to output.
* Format output as table.
* Update outdated example description.
* Add `scanDelete()` as hint to free memory.
* added 32 chars SSID + readme edit
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* replaced original iBeacon example with a known-good one
* addressed VojtechBartoska's comment
* incorporated P-R-O-C-H-Y's change
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(toString method): Add RSSI / serviceData
These are key characteristics of the BLE advertising packet. Really useful, adding to this method allows data to be easily obtained and passed over TCP/IP for processing.
* fix: remove line 565 bug
Currently, if a second connection occur in Bluetooth, this second connection is automatically disconnected (line 284).
This disconnection trigger the ESP_SPP_CLOSE_EVT, which clear the bit SPP_CONNECTED.
But the first connection remain active, and this flag shouldn't be cleared.
This fix the issue, by clearing the flag only if the last connection is closed
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
This commit addes an example showing how to receive messages using the TWAI
driver interface and a CAN transceiver. Specifically, the example demonstrates:
- How to configure and install the TWAI drvier
- How to poll for TWAI events (i.e., alerts) using twai_read_alerts()
- How to handle the various events (such as TWAI_ALERT_RX_DATA)
Closes https://github.com/espressif/arduino-esp32/pull/7430
Co-authored-by: Stephan Martin <designer2k2@gmail.com>
* Added enableScenes API
* Added enableScenes API documentation
* Added enableScenes API to example
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Fixed#7406 . The "reason2str" macro in WiFiGeneric.cpp tries to read memory from index "-1" in "system_event_reasons" array when handling STA_DISCONNECTED event with reason 0. Dealing with reason 0 as a reason 1 (WIFI_REASON_UNSPECIFIED) will solve the problem (the reason for this event to arrive with reason 0 is unknown). #7406
The original code assumes 100Hz FreeRTOS tick rate and just supplies vTaskDelay with the assumed number of ticks required for the wanted delay. This patch simply fixes it to use portTICK_PERIOD_MS, thereby working correctly regardless of what tick rate FreeRTOS has been configured to run at.
