#ifndef Pins_Arduino_h
#define Pins_Arduino_h

#include <stdint.h>

static const uint8_t LED_BUILTIN = 2;
#define BUILTIN_LED LED_BUILTIN  // backward compatibility
#define LED_BUILTIN LED_BUILTIN  // allow testing #ifdef LED_BUILTIN

static const uint8_t SDA = 21;
static const uint8_t SCL = 22;

//SPI
static const uint8_t IO5 = 5;    //SS
static const uint8_t IO23 = 23;  //MOSI
static const uint8_t IO19 = 19;  //MISO
static const uint8_t IO18 = 18;  //SCK

static const uint8_t SS = IO5;
static const uint8_t MOSI = IO23;
static const uint8_t MISO = IO19;
static const uint8_t SCK = IO18;

//ANALOG
static const uint8_t IO36 = 36;
static const uint8_t IO39 = 39;
static const uint8_t IO4 = 4;
static const uint8_t IO2 = 2;
static const uint8_t IO35 = 35;
//ANALOG+
static const uint8_t IO15 = 15;
static const uint8_t IO33 = 33;
static const uint8_t IO32 = 32;
static const uint8_t IO0 = 0;

//DIGITAL
static const uint8_t IO13 = 13;
static const uint8_t IO12 = 12;
static const uint8_t IO14 = 14;
static const uint8_t IO27 = 27;
static const uint8_t IO16 = 16;
static const uint8_t IO17 = 17;
static const uint8_t IO25 = 25;
static const uint8_t IO26 = 26;
static const uint8_t TX0 = 1;
static const uint8_t RX0 = 3;
//TFlash(uSD)
static const uint8_t SD2 = 9;
static const uint8_t SD3 = 10;
static const uint8_t CMD = 11;
static const uint8_t CLK = 6;
static const uint8_t SD0 = 7;
static const uint8_t SD1 = 8;

//Arduino Uno backward compatibility
static const uint8_t A0 = 2;
static const uint8_t A1 = 4;
static const uint8_t A2 = 35;
static const uint8_t A3 = 34;
static const uint8_t A4 = 36;
static const uint8_t A5 = 39;

static const uint8_t D0 = 3;
static const uint8_t D1 = 1;
static const uint8_t D2 = 26;
static const uint8_t D3 = 25;
static const uint8_t D4 = 17;
static const uint8_t D5 = 16;
static const uint8_t D6 = 27;
static const uint8_t D7 = 14;
static const uint8_t D8 = 12;
static const uint8_t D9 = 13;
static const uint8_t D10 = 5;
static const uint8_t D11 = 23;
static const uint8_t D12 = 19;
static const uint8_t D13 = 18;

static const uint8_t TX = 1;
static const uint8_t RX = 3;

#define PIN_WIRE_SDA SDA  // backward compatibility
#define PIN_WIRE_SCL SCL  // backward compatibility

#define PIN_SPI_SS   SS    // backward compatibility
#define PIN_SPI_MOSI MOSI  // backward compatibility
#define PIN_SPI_MISO MISO  // backward compatibility
#define PIN_SPI_SCK  SCK   // backward compatibility

#define PIN_A0 A0  // backward compatibility

// ESP-WROOM-32 does not have GPIO 14, 20(NC), 24, 28, 29, 30, 31, 36, 37, 38, 40+
// All pins should be PWM capable. The board is a clone of WeMos D1 R32.

#endif /* Pins_Arduino_h */