Update PlatformIO builder script and docs (#633)

* Update board generation, use renamed function

* Update documentation with new platform integration state

* Remove accidentally pushed file

* Use correct update command

* Use correct highlighting

* Use correct language

* Add section on debugging

* Add docs on filesystem, minor corrections

* Use -iprefix in compilation, but still expose all include paths to IDE

* Add exception and RTTI support, document them

* Fix typo

docs/platformio.rst

@@ -19,14 +19,14 @@ The PlatformIO experience:
 
 Refer to the general documentation at https://docs.platformio.org/.
 
-Especially useful is the `Getting started with VSCode + PlatformIO <https://docs.platformio.org/en/latest/integration/ide/vscode.html#installation), [CLI reference](https://docs.platformio.org/en/latest/core/index.html) and [platformio.ini options](https://docs.platformio.org/en/latest/projectconf/index.html)>`__ page.
+Especially useful is the `Getting started with VSCode + PlatformIO <https://docs.platformio.org/en/latest/integration/ide/vscode.html#installation>`_, `CLI reference <https://docs.platformio.org/en/latest/core/index.html>`_ and the `platformio.ini options <https://docs.platformio.org/en/latest/projectconf/index.html>`_ page.
 
 Hereafter it is assumed that you have a basic understanding of PlatformIO in regards to project creation, project file structure and building and uploading PlatformIO projects, through reading the above pages.
 
 Current state of development
 ----------------------------
 
-At the time of writing, PlatformIO integration for this core is a work-in-progress and not yet merged into mainline PlatformIO. This is subject to change soon.
+At the time of writing, PlatformIO integration for this core is a work-in-progress and not yet merged into mainline PlatformIO. This is subject to change once `this pull request <https://github.com/platformio/platform-raspberrypi/pull/36>`_ is merged.
 
 If you want to use the PlatformIO integration right now, make sure you first create a standard Raspberry Pi Pico + Arduino project within PlatformIO. 
 This will give you a project with the ``platformio.ini`` 
@@ -38,8 +38,7 @@ This will give you a project with the ``platformio.ini``
     board = pico
     framework = arduino
 
-Here, you need to change the `platform` to take advantage of the features described hereunder. 
+Here, you need to change the `platform` to take advantage of the features described hereunder and switch to the new core.
-You *also* need to inject two PlatformIO packages, one for the compiler toolchain and one for the Arduino core package.
 
 .. code:: ini
 
@@ -47,12 +46,34 @@ You *also* need to inject two PlatformIO packages, one for the compiler toolchai
     platform = https://github.com/maxgerhardt/platform-raspberrypi.git
     board = pico
     framework = arduino
+    board_build.core = earlephilhower
+    
+When the support for this core has been merged into mainline PlatformIO, this notice will be removed and a standard `platformio.ini` as shown above will work as a base.
+
+Deprecation warnings
+---------------------
+
+Previous versions of this documentation told users to inject the framework and toolchain package into the project by using
+
+.. code:: ini
+
     ; note that download link for toolchain is specific for OS. see https://github.com/earlephilhower/pico-quick-toolchain/releases.
     platform_packages = 
         maxgerhardt/framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git
         maxgerhardt/toolchain-pico@https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-w64-mingw32.arm-none-eabi-7855b0c.210706.zip
-    
+
-When the support for this core has been merged into mainline PlatformIO, this notice will be removed and a standard `platformio.ini` as shown above will work as a base.
+This is now **deprecated** and should not be done anymore. Users should delete these ``platform_packages`` lines and update the platform integration by issuing the command
+
+.. code:: bash
+
+    pio pkg update -g -p https://github.com/maxgerhardt/platform-raspberrypi.git
+
+in the `PlatformIO CLI <https://docs.platformio.org/en/latest/integration/ide/vscode.html#platformio-core-cli>`_. The same can be achieved by using the VSCode PIO Home -> Platforms -> Updates GUI.
+
+The toolchain, which was also renamed to ``toolchain-rp2040-earlephilhower`` is downloaded automatically from the registry. The same goes for the ``framework-arduinopico`` toolchain package, which points directly to the Arduino-Pico Github repository.
+However, users can still select a custom fork or branch of the core if desired so, as detailed in a chapter below.
+
+As the pull req
 
 Selecting the new core
 ----------------------
@@ -61,8 +82,8 @@ Prerequisite for using this core is to tell PlatformIO to switch to it.
 There will be board definition files where the Earle-Philhower core will
 be the default since it's a board that only exists in this core (and not
 the other https://github.com/arduino/ArduinoCore-mbed). To switch boards
-for which this is not the default core (e.g. the standard
+for which this is not the default core (which are only
-``board = pico``), the directive
+``board = pico`` and ``board = nanorp2040connect``), the directive
 
 .. code:: ini
 
@@ -72,6 +93,8 @@ must be added to the ``platformio.ini``. This controls the `core
 switching
 logic <https://github.com/maxgerhardt/platform-raspberrypi/blob/77e0d3a29d1dbf00fd3ec3271104e3bf4820869c/builder/frameworks/arduino/arduino.py#L27-L32>`__.
 
+When using Arduino-Pico-only boards like ``board = rpipico`` or ``board = adafruit_feather``, this is not needed.
+
 Flash size
 ----------
 
@@ -154,6 +177,37 @@ either a sing line or a newline-separated expression.
        -DDEBUG_RP2040_CORE
        -DDEBUG_RP2040_PORT=Serial2
 
+C++ Exceptions
+--------------
+
+Exceptions are disabled by default. To enable them, use
+
+.. code:: ini
+
+    ; Enable Exceptions
+    build_flags = -DPIO_FRAMEWORK_ARDUINO_ENABLE_EXCEPTIONS
+
+Stack Protector
+---------------
+
+To enable GCC's stack protection feature, use
+
+.. code:: ini
+
+    ; Enable Stack Protector
+    build_flags = -fstack-protector
+
+
+RTTI
+----
+
+RTTI (run-time type information) is disabled by default. To enable it, use
+
+.. code:: ini
+
+    ; Enable RTTI
+    build_flags = -DPIO_FRAMEWORK_ARDUINO_ENABLE_RTTI
+
 USB Stack
 ---------
 
@@ -188,8 +242,8 @@ directive to do so. Simply specify that the framework package
 Whereas the ``#master`` can also be replaced by a ``#branchname`` or a
 ``#commithash``. If left out, it will pull the default branch, which is ``master``.
 
-The ``file://`` pseudo-protocol can also be used instead of ``https://`` to point to a
+The ``file://`` and ``symlink://`` pseudo-protocols can also be used instead of ``https://`` to point to a
-local copy of the core (with e.g. some modifications) on disk.
+local copy of the core (with e.g. some modifications) on disk (`see documentation <https://docs.platformio.org/en/latest/core/userguide/pkg/cmd_install.html?#local-folder>_`).
 
 Note that this can only be done for versions that have the PlatformIO
 builder script it in, so versions before 1.9.2 are not supported.
@@ -206,14 +260,50 @@ and 0.5MByte filesystem.
     platform = https://github.com/maxgerhardt/platform-raspberrypi.git
     board = pico
     framework = arduino
+    ; board can use both Arduino cores -- we select Arduino-Pico here
     board_build.core = earlephilhower
     board_build.filesystem_size = 0.5m
-    ; note that download link for toolchain is specific for OS. see https://github.com/earlephilhower/pico-quick-toolchain/releases.
-    platform_packages = 
-        maxgerhardt/framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git
-        maxgerhardt/toolchain-pico@https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-w64-mingw32.arm-none-eabi-7855b0c.210706.zip
 
 
 The initial project structure should be generated just creating a new
 project for the Pico and the Arduino framework, after which the
 auto-generated ``platformio.ini`` can be adapted per above.
+
+Debugging
+---------
+
+With recent updates to the toolchain and OpenOCD, debugging firmwares is also possible.
+
+To specify the debugging adapter, use ``debug_tool`` (`documentation <https://docs.platformio.org/en/latest/projectconf/section_env_debug.html#debug-tool>`_). Supported values are:
+
+* ``picoprobe``
+* ``cmsis-dap``
+* ``jlink``
+* ``raspberrypi-swd``
+
+These values can also be used in ``upload_protocol`` if you want PlatformIO to upload the regular firmware through this method, which you likely want.
+
+Especially the PicoProbe method is convenient when you have two Raspberry Pi Pico boards. One of them can be flashed with the PicoProbe firmware (`documentation <https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html#debugging-using-another-raspberry-pi-pico>`_) and is then connected to the target Raspberry Pi Pico board (see `documentation <https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf>`_ chapter "Picoprobe Wiring"). Remember that on Windows, you have to use `Zadig <https://zadig.akeo.ie/>`_ to also load "WinUSB" drivers for the "Picoprobe (Interface 2)" device so that OpenOCD can speak to it.
+
+With that set up, debugging can be started via the left debugging sidebar and works nicely: Setup breakpoints, inspect the value of variables in the code, step through the code line by line. When a breakpoint is hit or execution is halted, you can even see the execution state both Cortex-M0+ cores of the RP2040.
+
+.. image:: images/pio_debugging.png
+
+For further information on customizing debug options, like the initial breakpoint or debugging / SWD speed, consult `the documentation <https://docs.platformio.org/en/latest/projectconf/section_env_debug.html>`_.
+
+Filesystem Uploading
+--------------------
+
+For the Arduino IDE, `a plugin <https://github.com/earlephilhower/arduino-pico#uploading-filesystem-images>`_ is available that enables a data folder to be packed as a LittleFS filesystem binary and uploaded to the Pico.
+
+This functionality is also built-in in the PlatformIO integration. Open the `project tasks <https://docs.platformio.org/en/latest/integration/ide/vscode.html#project-tasks>`_ and expand the "Platform" tasks: 
+
+.. image:: images/pio_fs_upload.png
+
+The files you want to upload should be placed in a folder called ``data`` inside the project. This can be customized `if needed <https://docs.platformio.org/en/latest/projectconf/section_platformio.html#data-dir>`_.
+
+The task "Build Filesystem Image" will take all files in the data directory and create a ``littlefs.bin`` file from it using the ``mklittlefs`` tool.
+
+The task "Upload Filesystem Image" will upload the filesystem image to the Pico via the specified ``upload_protocol``. 
+
+**Note:** Currently only the default ``picotool`` (regular direct USB upload) and the OpenOCD-based debug methods (meaning all but ``jlink``) can transport the filesystem to the Pico.

tools/json/adafruit_feather.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "adafruit_feather",
     "arduino": {
       "earlephilhower": {
-        "variant": "adafruit_feather",
         "boot2_source": "boot2_w25x10cl_4_padded_checksum.S",
         "usb_vid": "0x239a",
-        "usb_pid": "0x80f1",
+        "usb_pid": "0x80f1"
-        "usb_manufacturer": "Adafruit",
-        "usb_product": "Feather RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Adafruit"
-}
+}

tools/json/adafruit_itsybitsy.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "adafruit_itsybitsy",
     "arduino": {
       "earlephilhower": {
-        "variant": "adafruit_itsybitsy",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x239a",
-        "usb_pid": "0x80fd",
+        "usb_pid": "0x80fd"
-        "usb_manufacturer": "Adafruit",
-        "usb_product": "ItsyBitsy RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Adafruit"
-}
+}

tools/json/adafruit_kb2040.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "adafruit_kb2040",
     "arduino": {
       "earlephilhower": {
-        "variant": "adafruit_kb2040",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x239a",
-        "usb_pid": "0x8105",
+        "usb_pid": "0x8105"
-        "usb_manufacturer": "Adafruit",
-        "usb_product": "KB2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Adafruit"
-}
+}

tools/json/adafruit_macropad2040.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "adafruit_macropad2040",
     "arduino": {
       "earlephilhower": {
-        "variant": "adafruit_macropad2040",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x239a",
-        "usb_pid": "0x8107",
+        "usb_pid": "0x8107"
-        "usb_manufacturer": "Adafruit",
-        "usb_product": "MacroPad RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Adafruit"
-}
+}

tools/json/adafruit_qtpy.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "adafruit_qtpy",
     "arduino": {
       "earlephilhower": {
-        "variant": "adafruit_qtpy",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x239a",
-        "usb_pid": "0x80f7",
+        "usb_pid": "0x80f7"
-        "usb_manufacturer": "Adafruit",
-        "usb_product": "QT Py RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Adafruit"
-}
+}

tools/json/adafruit_stemmafriend.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "adafruit_stemmafriend",
     "arduino": {
       "earlephilhower": {
-        "variant": "adafruit_stemmafriend",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x239a",
-        "usb_pid": "0x80e3",
+        "usb_pid": "0x80e3"
-        "usb_manufacturer": "Adafruit",
-        "usb_product": "STEMMA Friend RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Adafruit"
-}
+}

tools/json/adafruit_trinkeyrp2040qt.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "adafruit_trinkeyrp2040qt",
     "arduino": {
       "earlephilhower": {
-        "variant": "adafruit_trinkeyrp2040qt",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x239a",
-        "usb_pid": "0x8109",
+        "usb_pid": "0x8109"
-        "usb_manufacturer": "Adafruit",
-        "usb_product": "Trinkey RP2040 QT"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Adafruit"
-}
+}

tools/json/arduino_nano_connect.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "arduino_nano_connect",
     "arduino": {
       "earlephilhower": {
-        "variant": "arduino_nano_connect",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2341",
-        "usb_pid": "0x0058",
+        "usb_pid": "0x0058"
-        "usb_manufacturer": "Arduino",
-        "usb_product": "Nano RP2040 Connect"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Arduino"
-}
+}

tools/json/challenger_2040_lora.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "challenger_2040_lora",
     "arduino": {
       "earlephilhower": {
-        "variant": "challenger_2040_lora",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x1023",
+        "usb_pid": "0x1023"
-        "usb_manufacturer": "iLabs",
-        "usb_product": "Challenger 2040 LoRa"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "iLabs"
-}
+}

tools/json/challenger_2040_lte.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "challenger_2040_lte",
     "arduino": {
       "earlephilhower": {
-        "variant": "challenger_2040_lte",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x100b",
+        "usb_pid": "0x100b"
-        "usb_manufacturer": "iLabs",
-        "usb_product": "Challenger 2040 LTE"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "iLabs"
-}
+}

tools/json/challenger_2040_wifi.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "challenger_2040_wifi",
     "arduino": {
       "earlephilhower": {
-        "variant": "challenger_2040_wifi",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x1006",
+        "usb_pid": "0x1006"
-        "usb_manufacturer": "iLabs",
-        "usb_product": "Challenger 2040 WiFi"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "iLabs"
-}
+}

tools/json/challenger_2040_wifi_ble.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "challenger_2040_wifi_ble",
     "arduino": {
       "earlephilhower": {
-        "variant": "challenger_2040_wifi_ble",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x102C",
+        "usb_pid": "0x102C"
-        "usb_manufacturer": "iLabs",
-        "usb_product": "Challenger 2040 WiFi/BLE"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "iLabs"
-}
+}

tools/json/challenger_nb_2040_wifi.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "challenger_nb_2040_wifi",
     "arduino": {
       "earlephilhower": {
-        "variant": "challenger_nb_2040_wifi",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x100b",
+        "usb_pid": "0x100b"
-        "usb_manufacturer": "iLabs",
-        "usb_product": "Challenger NB 2040 WiFi"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "iLabs"
-}
+}

tools/json/cytron_maker_nano_rp2040.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "cytron_maker_nano_rp2040",
     "arduino": {
       "earlephilhower": {
-        "variant": "cytron_maker_nano_rp2040",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x100f",
+        "usb_pid": "0x100f"
-        "usb_manufacturer": "Cytron",
-        "usb_product": "Maker Nano RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Cytron"
-}
+}

tools/json/cytron_maker_pi_rp2040.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "cytron_maker_pi_rp2040",
     "arduino": {
       "earlephilhower": {
-        "variant": "cytron_maker_pi_rp2040",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x1000",
+        "usb_pid": "0x1000"
-        "usb_manufacturer": "Cytron",
-        "usb_product": "Maker Pi RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Cytron"
-}
+}

tools/json/dfrobot_beetle_rp2040.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "dfrobot_beetle_rp2040",
     "arduino": {
       "earlephilhower": {
-        "variant": "dfrobot_beetle_rp2040",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x3343",
-        "usb_pid": "0x4253",
+        "usb_pid": "0x4253"
-        "usb_manufacturer": "DFRobot",
-        "usb_product": "Beetle RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "DFRobot"
-}
+}

tools/json/flyboard2040_core.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "flyboard2040_core",
     "arduino": {
       "earlephilhower": {
-        "variant": "flyboard2040_core",
         "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x008a",
+        "usb_pid": "0x008a"
-        "usb_manufacturer": "DeRuiLab",
-        "usb_product": "FlyBoard2040Core"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "DeRuiLab"
-}
+}

tools/json/generic.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "generic",
     "arduino": {
       "earlephilhower": {
-        "variant": "generic",
         "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0xf00a",
+        "usb_pid": "0xf00a"
-        "usb_manufacturer": "Generic",
-        "usb_product": "RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Generic"
-}
+}

tools/json/ilabs_rpico32.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "ilabs_rpico32",
     "arduino": {
       "earlephilhower": {
-        "variant": "ilabs_rpico32",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x1010",
+        "usb_pid": "0x1010"
-        "usb_manufacturer": "iLabs",
-        "usb_product": "RPICO32"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "iLabs"
-}
+}

tools/json/melopero_shake_rp2040.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "melopero_shake_rp2040",
     "arduino": {
       "earlephilhower": {
-        "variant": "melopero_shake_rp2040",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x1005",
+        "usb_pid": "0x1005"
-        "usb_manufacturer": "Melopero",
-        "usb_product": "Shake RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Melopero"
-}
+}

tools/json/rpipico.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "rpipico",
     "arduino": {
       "earlephilhower": {
-        "variant": "rpipico",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x000a",
+        "usb_pid": "0x000a"
-        "usb_manufacturer": "Raspberry Pi",
-        "usb_product": "Pico"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Raspberry Pi"
-}
+}

tools/json/seeed_xiao_rp2040.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "seeed_xiao_rp2040",
     "arduino": {
       "earlephilhower": {
-        "variant": "seeed_xiao_rp2040",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x000a",
+        "usb_pid": "0x000a"
-        "usb_manufacturer": "Seeed",
-        "usb_product": "XAIO RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Seeed"
-}
+}

tools/json/solderparty_rp2040_stamp.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "solderparty_rp2040_stamp",
     "arduino": {
       "earlephilhower": {
-        "variant": "solderparty_rp2040_stamp",
         "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
         "usb_vid": "0x1209",
-        "usb_pid": "0xa182",
+        "usb_pid": "0xa182"
-        "usb_manufacturer": "Solder Party",
-        "usb_product": "RP2040 Stamp"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "Solder Party"
-}
+}

tools/json/sparkfun_promicrorp2040.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "sparkfun_promicrorp2040",
     "arduino": {
       "earlephilhower": {
-        "variant": "sparkfun_promicrorp2040",
         "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
         "usb_vid": "0x1b4f",
-        "usb_pid": "0x0026",
+        "usb_pid": "0x0026"
-        "usb_manufacturer": "SparkFun",
-        "usb_product": "ProMicro RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "SparkFun"
-}
+}

tools/json/sparkfun_thingplusrp2040.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "sparkfun_thingplusrp2040",
     "arduino": {
       "earlephilhower": {
-        "variant": "sparkfun_thingplusrp2040",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x1b4f",
-        "usb_pid": "0x0026",
+        "usb_pid": "0x0026"
-        "usb_manufacturer": "SparkFun",
-        "usb_product": "Thing Plus RP2040"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "SparkFun"
-}
+}

tools/json/upesy_rp2040_devkit.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "upesy_rp2040_devkit",
     "arduino": {
       "earlephilhower": {
-        "variant": "upesy_rp2040_devkit",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x1007",
+        "usb_pid": "0x1007"
-        "usb_manufacturer": "uPesy",
-        "usb_product": "RP2040 DevKit"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "uPesy"
-}
+}

tools/json/wiznet_5100s_evb_pico.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "wiznet_5100s_evb_pico",
     "arduino": {
       "earlephilhower": {
-        "variant": "wiznet_5100s_evb_pico",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x1027",
+        "usb_pid": "0x1027"
-        "usb_manufacturer": "WIZnet",
-        "usb_product": "W5100S-EVB-Pico"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "WIZnet"
-}
+}

tools/json/wiznet_5500_evb_pico.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "wiznet_5500_evb_pico",
     "arduino": {
       "earlephilhower": {
-        "variant": "wiznet_5500_evb_pico",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x1029",
+        "usb_pid": "0x1029"
-        "usb_manufacturer": "WIZnet",
-        "usb_product": "W5500-EVB-Pico"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "WIZnet"
-}
+}

tools/json/wiznet_wizfi360_evb_pico.json

@@ -11,14 +11,12 @@
       ]
     ],
     "mcu": "rp2040",
+    "variant": "wiznet_wizfi360_evb_pico",
     "arduino": {
       "earlephilhower": {
-        "variant": "wiznet_wizfi360_evb_pico",
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2e8a",
-        "usb_pid": "0x1028",
+        "usb_pid": "0x1028"
-        "usb_manufacturer": "WIZnet",
-        "usb_product": "WizFi360-EVB-Pico"
       }
     }
   },
@@ -49,4 +47,4 @@
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "WIZnet"
-}
+}

tools/makeboards.py

@@ -188,14 +188,12 @@ def MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, f
       ]
     ],
     "mcu": "rp2040",
+    "variant": "VARIANTNAME",
     "arduino": {
       "earlephilhower": {
-        "variant": "VARIANTNAME",
         "boot2_source": "BOOT2.S",
         "usb_vid": "VID",
-        "usb_pid": "PID",
+        "usb_pid": "PID"
-        "usb_manufacturer": "VENDORNAME",
-        "usb_product": "PRODUCTNAME"
       }
     }
   },
@@ -226,7 +224,7 @@ def MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, f
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
   "vendor": "VENDORNAME"
-}""".replace('VARIANTNAME', name).replace('BOARDDEFINE', boarddefine).replace('BOOT2', boot2).replace('VID', vid).replace('PID', pid).replace('VENDORNAME', vendor_name).replace('PRODUCTNAME', product_name).replace('FLASHSIZE', str(1024*1024*flashsizemb)).replace('USBPWR', str(pwr))
+}\n""".replace('VARIANTNAME', name).replace('BOARDDEFINE', boarddefine).replace('BOOT2', boot2).replace('VID', vid).replace('PID', pid).replace('VENDORNAME', vendor_name).replace('PRODUCTNAME', product_name).replace('FLASHSIZE', str(1024*1024*flashsizemb)).replace('USBPWR', str(pwr))
     jsondir = os.path.abspath(os.path.dirname(__file__)) + "/json"
     f = open(jsondir + "/" + name + ".json", "w")
     f.write(json)

tools/platformio-build.py

@@ -27,7 +27,8 @@ ram_size = 256 * 1024 # not the 264K, which is 256K SRAM + 2*4K SCRATCH(X/Y).
 FRAMEWORK_DIR = platform.get_package_dir("framework-arduinopico")
 assert os.path.isdir(FRAMEWORK_DIR)
 
-# read includes from this file to add them into CPPPATH later
+# read includes from this file to add them into CPPPATH later for good IDE intellisense
+# will use original -iprefix <prefix> @<file> for compilation though.
 includes_file = os.path.join(FRAMEWORK_DIR, "lib", "platform_inc.txt")
 file_lines = []
 includes = []
@@ -38,10 +39,41 @@ for l in file_lines:
     # emulate -iprefix <framework path>.
     path = os.path.join(FRAMEWORK_DIR, path)
     # prevent non-existent paths from being added
-    # looking at you here, pico-extras/src/common/pico_audio and co.
     if os.path.isdir(path):
         includes.append(path)
 
+def is_pio_build():
+	from SCons.Script import COMMAND_LINE_TARGETS
+	return "idedata" not in COMMAND_LINE_TARGETS and "_idedata" not in COMMAND_LINE_TARGETS
+
+# get all activated macros
+flatten_cppdefines = env.Flatten(env['CPPDEFINES'])
+
+#
+# Exceptions
+#
+stdcpp_lib = None
+if "PIO_FRAMEWORK_ARDUINO_ENABLE_EXCEPTIONS" in flatten_cppdefines:
+    env.Append(
+        CXXFLAGS=["-fexceptions"]
+    )
+    stdcpp_lib = "stdc++-exc"
+else:
+    env.Append(
+        CXXFLAGS=["-fno-exceptions"]
+    )
+    stdcpp_lib = "stdc++"
+
+#
+# RTTI
+#
+# standard is -fno-rtti flag. If special macro is present, don't 
+# add that flag.
+if not "PIO_FRAMEWORK_ARDUINO_ENABLE_RTTI" in flatten_cppdefines:
+    env.Append(
+        CXXFLAGS=["-fno-rtti"]
+    )
+
 # update progsize expression to also check for bootloader.
 env.Replace(
     SIZEPROGREGEXP=r"^(?:\.boot2|\.text|\.data|\.rodata|\.text.align|\.ARM.exidx)\s+(\d+).*"
@@ -57,11 +89,8 @@ env.Append(
         "-mcpu=cortex-m0plus",
         "-mthumb",
         "-ffunction-sections",
-        "-fdata-sections",
+        "-fdata-sections"
-        # use explicit include (-I) paths, otherwise it's
+        # -iprefix etc. added lader if in build mode
-        # not visible in the IDE's intellisense.
-        #"-iprefix" + os.path.join(FRAMEWORK_DIR),
-        #"@%s" % os.path.join(FRAMEWORK_DIR, "lib", "platform_inc.txt")
     ],
 
     CFLAGS=[
@@ -70,8 +99,6 @@ env.Append(
 
     CXXFLAGS=[
         "-std=gnu++17",
-        "-fno-exceptions",
-        "-fno-rtti",
     ],
 
     CPPDEFINES=[
@@ -114,10 +141,18 @@ env.Append(
     # link lib/libpico.a by full path, ignore libstdc++
     LIBS=[
         File(os.path.join(FRAMEWORK_DIR, "lib", "libpico.a")), 
-        "m", "c", "stdc++", "c"]
+        "m", "c", stdcpp_lib, "c"]
 )
-# expand with read includes
+
-env.Append(CPPPATH=includes)
+# expand with read includes for IDE, but use -iprefix command for actual building
+if not is_pio_build():
+    env.Append(CPPPATH=includes)
+else:
+    env.Append(CCFLAGS=[
+        "-iprefix" + os.path.join(FRAMEWORK_DIR),
+        "@%s" % os.path.join(FRAMEWORK_DIR, "lib", "platform_inc.txt")
+    ])
+
 
 def configure_usb_flags(cpp_defines):
     global ram_size
@@ -223,8 +258,8 @@ linkerscript_cmd = env.Command(
 
 # if no custom linker script is provided, we use the command that we prepared to generate one.
 if not board.get("build.ldscript", ""):
-    # execute fetch filesystem info stored in env to alawys have that info ready
+    # execute fetch filesystem info stored in env to always have that info ready
-    env["fetch_fs_size"](env)
+    env["__fetch_fs_size"](env)
     env.Depends("$BUILD_DIR/${PROGNAME}.elf", linkerscript_cmd)
     env.Replace(LDSCRIPT_PATH=os.path.join("$BUILD_DIR", "memmap_default.ld"))