Add WiFiClient example for w6100 for CI (#2348)

libraries/lwIP_w6100/examples/WiFiClient-W6100/WiFiClient-W6100.ino

@@ -0,0 +1,95 @@
+/*
+    This sketch establishes a TCP connection to a "quote of the day" service.
+    It sends a "hello" message, and then prints received data.
+*/
+
+#include <W6100lwIP.h>
+
+const char* host = "djxmmx.net";
+const uint16_t port = 17;
+
+Wiznet6100lwIP eth(1 /* chip select */);
+
+void setup() {
+  // Set up SPI pinout to match your HW
+  SPI.setRX(0);
+  SPI.setCS(1);
+  SPI.setSCK(2);
+  SPI.setTX(3);
+
+  Serial.begin(115200);
+  delay(5000);
+  Serial.println();
+  Serial.println();
+  Serial.println("Starting Ethernet port");
+
+  // Start the Ethernet port
+  if (!eth.begin()) {
+    Serial.println("No wired Ethernet hardware detected. Check pinouts, wiring.");
+    while (1) {
+      delay(1000);
+    }
+  }
+
+  while (!eth.connected()) {
+    Serial.print(".");
+    delay(500);
+  }
+
+  Serial.println("");
+  Serial.println("Ethernet connected");
+  Serial.println("IP address: ");
+  Serial.println(eth.localIP());
+}
+
+void loop() {
+  static bool wait = false;
+
+  Serial.print("connecting to ");
+  Serial.print(host);
+  Serial.print(':');
+  Serial.println(port);
+
+  // Use WiFiClient class to create TCP connections
+  WiFiClient client;
+  if (!client.connect(host, port)) {
+    Serial.println("connection failed");
+    delay(5000);
+    return;
+  }
+
+  // This will send a string to the server
+  Serial.println("sending data to server");
+  if (client.connected()) {
+    client.println("hello from RP2040");
+  }
+
+  // wait for data to be available
+  unsigned long timeout = millis();
+  while (client.available() == 0) {
+    if (millis() - timeout > 5000) {
+      Serial.println(">>> Client Timeout !");
+      client.stop();
+      delay(60000);
+      return;
+    }
+  }
+
+  // Read all the lines of the reply from server and print them to Serial
+  Serial.println("receiving from remote server");
+  // not testing 'client.connected()' since we do not need to send data here
+  while (client.available()) {
+    char ch = static_cast<char>(client.read());
+    Serial.print(ch);
+  }
+
+  // Close the connection
+  Serial.println();
+  Serial.println("closing connection");
+  client.stop();
+
+  if (wait) {
+    delay(300000);  // execute once every 5 minutes, don't flood remote service
+  }
+  wait = true;
+}

libraries/lwIP_w6100/keywords.txt

@@ -0,0 +1,18 @@
+#######################################
+# Syntax Coloring Map
+#######################################
+
+#######################################
+# Library (KEYWORD1)
+#######################################
+
+W6100lwIP	KEYWORD1
+Wiznet6100lwIP	KEYWORD1
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+
+#######################################
+# Constants (LITERAL1)
+#######################################

libraries/lwIP_w6100/library.properties

@@ -0,0 +1,10 @@
+name=lwIP_w6100
+version=1
+author=Stefan Nuernberger
+maintainer=esp8266/Arduino
+sentence=Ethernet driver
+paragraph=Wiznet6100 ethernet drivers for lwIP and esp8266 Arduino from https://github.com/njh/W5100MacRaw
+category=Communication
+url=https://github.com/esp8266/Arduino
+architectures=rp2040
+dot_a_linkage=true