FeuerSturm
9e3f6ade61
Fix WizFi360-EVB-Pico pins_arduino.h ( #608 )
...
Slight difference to generic RP2040
PIN_SERIAL2_TX + PIN_SERIAL2_RX are
switched with PIN_WIRE0_SDA + PIN_WIRE0_SCL
2022-06-05 16:59:22 -07:00
Earle F. Philhower, III
10b869ef30
Fix XIAO RP2040, allow swapping HW units 0/1 ( #606 )
...
Add plumbing to allow `Wire`, `Serial1`, `SPI1` to map to the 2nd
hardware unit for devices where the PCB layout only brings out the
2nd port.
Fix the Seeedstudio XAIO pins
Fixes #594
2022-06-04 21:37:28 -07:00
FeuerSturm
c863dad73e
New WIZnet boards ( #605 )
...
- added WIZnet WizFi360-EVB-Pico
- added WIZnet W5500-EVB-Pico
- corrected WIZnet W5100S-EVB-Pico PID
2022-06-03 11:56:13 -07:00
Arya11111
a58154b52b
Modify DFRobot Beetle pin_arduinos.h ( #597 )
...
Co-authored-by: Arya11111 <xuepeng@dfrobot.com>
2022-05-25 15:13:25 -07:00
Pontus Oldberg
a9b24827e2
Updated PID for WiFi/BLE board and other changes ( #595 )
2022-05-24 08:07:49 -07:00
Pontus Oldberg
e4153b03bc
Add new Challenger RP2040 WiFi/BLE board ( #587 )
2022-05-20 05:26:01 -07:00
Arya11111
646d56046f
DFRobot Beetle modify some notes. ( #580 )
...
Co-authored-by: Arya11111 <xuepeng@dfrobot.com>
2022-05-11 07:29:59 -07:00
Arya11111
dbf855e1aa
Modify DFRobot pins_arduino.h ( #573 )
...
Co-authored-by: Arya11111 <xuepeng@dfrobot.com>
2022-05-05 11:35:20 -07:00
iKK001
3adc1c5321
Correct Serial1 and Serial2 pinout definitions added ( #570 )
...
Co-authored-by: Stephan Korner <stephan.korner@trihow.com>
2022-05-04 13:04:01 -07:00
Earle F. Philhower, III
561110231d
Add SparkFun Thing Plus RP2040 ( #540 )
2022-04-17 14:39:28 -07:00
Earle F. Philhower, III
eff908385e
Add Seeed XAIO RP2040 support ( #538 )
...
Fixes #537
2022-04-16 10:52:06 -07:00
Earle F. Philhower, III
061b38f0b8
Add RTS/CTS to Arduino Nano Connect Serial2(NINA) ( #525 )
...
Fixes #524
2022-03-30 14:12:24 -07:00
Arya11111
9971bda9cb
Modify DFRobot pins_arduino.h file. ( #521 )
2022-03-29 07:17:00 -07:00
Earle F. Philhower, III
da215aecd4
Fix QT Py serial (Serial2 pinned out, not Serial1) ( #505 )
2022-03-05 14:28:45 -08:00
Arya11111
e444a7329c
Add DFRobot Beetle RP2040 boards V1.0.0 ( #502 )
2022-02-24 04:56:59 -08:00
Pontus Oldberg
f8e8a7b72e
Updating LoRa board pins and UART hw flow. ( #499 )
...
* Added missing SERIAL2 and LoRa module GIO pins.
* Added support for enabling UART CTS and RTS pins.
2022-02-22 01:45:24 -08:00
Pontus Oldberg
8dabe44693
Add support for Challenger RP2040 LoRa ( #494 )
2022-02-19 06:56:32 -08:00
Kattni
5980993774
Add NeoPixel pins to Adafruit boards ( #438 )
2022-01-26 11:41:39 -08:00
风飘雨
97f9afac0a
Add board flyboard2040core ( #437 )
...
Thx!
2022-01-26 08:46:13 -08:00
Juraj Andrássy
1fdc0ab7c1
Arduino Nano R2040 Connect Nina pins access with WiFiNINA lib ( #404 )
2022-01-09 09:11:27 -08:00
Khoi Hoang
9408b7e2c4
Fix WiFiNINA issue for Arduino Nano Connect ( #403 )
...
Fixes #373
2022-01-09 08:03:53 -08:00
arturo182
f91c4b3b9d
Add the RP2040 Stamp board ( #407 )
2022-01-03 11:38:05 -08:00
Khoi Hoang
52a22e5185
Fix Nano_RP2040_Connect pinout issue ( #400 )
...
Fix issues with [WiFiNINA](https://github.com/arduino-libraries/WiFiNINA ) and [WiFiNINA_Generic](https://github.com/khoih-prog/WiFiNINA_Generic ) libraries
Fixes #373
Fixes #375
Fixes #376
2022-01-01 13:05:25 -08:00
Earle F. Philhower, III
513bd81810
Add SDA/SCL variables like other cores export ( #398 )
...
Fixes #368 . Thanks @bperrybap!
2021-12-30 15:57:13 -08:00
Ken Piper
5b270aab61
Fix A0-A3 pin definitions for Adafruit QT Py RP2040 ( #397 )
2021-12-30 09:56:38 -08:00
Limor "Ladyada" Fried
894a82f54f
Add Adafruit KB2040 ( #390 )
2021-12-26 05:28:50 -08:00
Pontus Oldberg
4d1f5baa7e
Adds a lightweight support class for LTE functionality ( #367 )
2021-12-09 09:55:09 -08:00
Pontus Oldberg
f106035100
Adds support for Challenger NB RP2040 WiFi board and RPICO32 module ( #366 )
2021-12-07 09:44:38 -08:00
Wai Weng
341307cb8d
Added new variant: Cytron Maker Nano RP2040. ( #365 )
2021-12-06 00:02:54 -08:00
Eric Lind
238a6c83db
Update pins_arduino.h for challenger_2040_wifi ( #356 )
...
Adding definitions for internal reset and mode pins for ESP8285.
2021-12-01 08:08:37 -08:00
Earle F. Philhower, III
77f03a44b6
Add WIZnet W5100S-EVB-Pico board ( #355 )
2021-11-30 17:11:08 -08:00
uPesy Electronics
3d821f73a4
Add board variant for uPesy RP2040 DevKit ( #335 )
2021-10-29 08:12:45 -07:00
Wai Weng
a305b30d90
Added board variants Cytron Maker Pi RP2040. ( #340 )
2021-10-29 08:04:15 -07:00
apendley
cf63040c5a
Fix Wire pin definitions on ItsyBitsy ( #325 )
2021-09-26 18:19:49 -07:00
Leonardo La Rocca
e8ec79290b
Reverted Wire and Wire1 for Melopero ( #323 )
2021-09-26 18:11:25 -07:00
Leonardo La Rocca
bfa3819b0d
Melopero Shake: Switched Wire1 with Wire for simpler use ( #320 )
2021-09-22 07:39:25 -07:00
Leonardo La Rocca
608a5da480
Adds board variant definition for Melopero Shake RP2040 ( #318 )
2021-09-19 13:26:33 -07:00
AustinMorris
38c005c208
Fix wire defines on feather ( #281 )
2021-08-23 20:45:12 -07:00
Pontus Oldberg
cd91d3ef0f
Added minimal HW support for onboard WiFi modem. ( #287 )
2021-08-23 20:34:25 -07:00
Pontus Oldberg
02e8577f45
Add support for reverse numbering of analog pins. ( #283 )
2021-08-17 09:44:28 -07:00
Pontus Oldberg
2c29314578
Add support for our new Challenger RP2040 board with LTE modem. ( #275 )
...
* Adds support for Challenger RP2040 WiFi boards
* Added Challenger board to makeboards build script
* Adds new challenger board with LTE modem.
* Updated after getting approved PID from Raspberry Pi
2021-08-12 08:42:09 -07:00
Pontus Oldberg
733aca5ac3
Adds support for Challenger RP2040 WiFi boards ( #268 )
2021-07-29 08:59:27 -07:00
Earle F. Philhower, III
b02b9c4be8
Add PDM library for Arduino Nano RP2040 Connect ( #213 )
...
* Add PDM library for Arduino Nano RP2040 Connect
* No PDM test in CI, only works on Arduino Nano RP2040
2021-06-16 08:17:09 -07:00
Earle F. Philhower, III
6afcf5881d
Initial Arduino Nano RP2040 Connect support ( #212 )
...
Thanks to @Claupio for the bringup!
Reference #208
2021-06-14 08:59:52 -07:00
Earle F. Philhower, III
77712f5904
Add SparkFun ProMicro RP2040 ( #196 )
...
It's still OOS, so hookup taken from their schematics.
2021-06-08 06:55:13 -07:00
Limor "Ladyada" Fried
d2a2fcb89d
Add a new board - the Adafruit Macropad w/RP2040 ( #191 )
...
* add two variant files
* add trinkey and stemma friend
* add fast SPI transfer using pico-sdk blocks
* update makeboards.py for new variants
- STEMMA Friend RP2040
- Trinkey RP2040 QT
* run astyle on SPI library
* fix auto -> ssize type
* astyled
* woops ssizet != sizet!
* a nice day for a new board definition! this is a macropad with 12 keys, oled and rotary encoder
Co-authored-by: hathach <thach@tinyusb.org>
2021-06-06 12:53:06 -07:00
Limor "Ladyada" Fried
860b43b342
Two board variant definitions and a high speed SPI transfer function ( #172 )
2021-05-26 18:09:49 -07:00
Earle F. Philhower, III
a0dac52e0e
Rationalize Adafruit Feather infra, update docs ( #145 )
...
Use same board.txt format as other Adafruit boards.
Add in quick note about the new USB stack to the docs.
2021-05-19 10:07:03 -07:00
Ha Thach
010039578f
Add Adafruit ItsyBitsy and QTPy RP2040 ( #144 )
...
* add adafruit qtpy and itsybitsy rp2040
* change qtpy boot2 to generic_03h_4
2021-05-19 09:39:19 -07:00
Earle F. Philhower, III
9725155f25
Fix SPI default pinouts to SPI0, not SPI1 pins ( #135 )
...
Should fix #134 . The SPI pin macros were set using the SPI1 set, not
the SPI0 set of pins it should have been using.
2021-05-15 16:13:11 -07:00
