Instead of listing each board three times (normal upload, picoprobe,
and pico-debug uploads), list each board once and use a menu to select
the actual upload method.
Also add in picotool as an upload method for those folks who have trouble
with automounting.
Fix#1111
* add rough for scorpio
* Add SCORPIO items from ladyada
* Change PID in makeboards.py instead of boards.txt
* Fix PID in scorpio JSON
* README: Add Feather SCORPIO to supported boards
* Fix PIDs using values from MBAdafruitBoards
Still unsure about pid.[1-7] but let's see what happens
* boards.txt fixed by running makeboards.py
Co-authored-by: lady ada <limor@ladyada.net>
Allow the IDE to detect UF2 volumes (i.e. when you hold BOOTDEL and
plug in the board).
Allows the IDE2 to properly upload using OTA and serial.
Fixes#890 and others
Adds a 12K OTA stub 3rd stage bootloader, which reads new firmware
from the LittleFS filesystem and flashes on reboot.
By storing the OTA commands in a file in flash, it is possible to
recover from a power failure during OTA programming. On power
resume, the OTA block will simply re-program from the beginning.
Support cryptographic signed OTA updates, if desired. Includes
host-side signing logic via openssl.
Add PicoOTA library which encapsulates the file format for
the updater, including CRC32 checking.
Add LEAmDNS support to allow Arduino IDE discovery
Add ArduinoOTA class for IDE uploads
Add MD5Builder class
Add Updater class which supports writing and validating
cryptographically signed binaries from any source (http,
Ethernet, WiFi, Serial, etc.)
Add documentation and readmes.
* Adds support for Challenger RP2040 WiFi boards
* Added Challenger board to makeboards build script
* Adds new challenger board with LTE modem.
* Updated after getting approved PID from Raspberry Pi
* Add support for reverse numbering of analog pins.
* Added minimal HW support for onboard WiFi modem.
* Added challenger-nb-rp2040-wifi and RPICO32 module.
* Updated PID for RPICO32
* Added a simple support class for challenger LTE boards
* Update ChallengerLTE.cpp
Fixed spelling error
* Adds option for setting USB max power in makeboards.py
* Added new board Challenger RP2040 LoRa
* Added new lora board to readme.
* Added missing SERIAL2 and LoRa module GIO pins.
* Added support for enabling UART CTS and RTS pins.
* Updated boards.txt after merge conflict of makeboards.py
* Fixed incorrect indention
* Fixed PR comments
* Add new Challenger RP2040 WiFi/BLE board (https://ilabs.se/challenger-rp2040-wifi-ble-datasheet)
* * Updated PID for WiFi/BLE board
* Added abstraction pins for both versions of wifi modules
* Added support for replacing support class serial port.
* Added support for retrieving support class serial port.
* Fixed spelling errors.
* Updated helper class for Challenger NB board.
* Added Challenger sdrtc and subghz boards.
* Updated readme.
* Re ran makeboards to generate new index.
* Added to possibility to have extra compiler directives for a board.
* Added extra compiler options to JSON generation.
* Allows having a list of extra macros to define
* Fixed incorrect USB PID for Challenger NB board.
* Added board initialization for all wifi boards.
Co-authored-by: Earle F. Philhower, III <earlephilhower@yahoo.com>
* Add support for the WiFi chip on the Pico W board.
* USB interrupt now no longer hard coded (conflicted with the WiFi IRQ).
* Add in Pico W board to makeboards.py
* Add in GPIO and variant support
* Initialize WiFi in the Variant
* Use manual LWIP, fix size accounting
* Remove the SDK WiFi overrides
* Pulling in work done in the ESP8266 core.
* Make IPAddress support IPv6
* Build LWIP with IPv4 and IPv6 support
* Use proper MAC
* Avoid cyw_warn crash. Make macro to a comment while building
* Add WiFiServer
* Add WiFiUdp
* Move LWIP-specific support files to LWIP_Ethernet
* Add WiFi::ping (ICMP ping)
* Move ICMP echo (ping) to LWIPIntfDev
* Move hostByName to LwipIntfDev
* Add AP mode with simple DHCP server
* Add some examples and basic ESP8266 compat hacks
* Update Adafruit TinyUSB to fix crash
* Set DHCP hostname
* Make Wifi.begin() return CONNECTED with link + IP
* Return connected() on WiFi::begin
* Fix spurious TCP retransmission
* Protect LWIP from reentrancy
The Pico SDK calls "sys_check_timeouts() from inside a periodic interrupt.
This appears unsafe, as the interrupt could happen while already in the
(non-reentrant) LWIP code.
Block the interrupt from calling sys_check_timeouts by using a global flag
manually set via an RAII recursive lock.
Add interrupt protection macros around critical sections inside LWIP via
the standard defines.
These two changes should make LWIP significantly more stable and long
running.
* Support disconnecting and reconnecting WiFi
* Add WiFiServer simple example
* Update documentation
Fixes#666Fixed#665
When real multicore/lockign support was added to newlib, there was an opaque
field in FILE that was used as a mutex, but was only 4 bytes in size. The
recursive mutexes on the RP2040 are 8 bytes. This mismatch caused corruption
of the FILE structure and crashes of the system when ::printf/::puts/etc. were
run.
Adjust the lock field size in FILE to 8 bytes and rebuild the toolchain to
fix.
Instead of wrapping the memory functions in the link stage, rebuild
Newlib and enable retargetable locks. Override the weak definitions
in the libc.a with our own, SDK based ones.
The wrapping utilized before catches app-level memory allocations
but misses allocations inside Newlib libc (like printf/etc.).
Each core needs its own _impure_ptr or else crashes like the one seen
in parallel printf_floats can happen. Enable it in the toolchain
build and implement a simple swapper here.
FreeRTOS SMP doesn't support Newlib's dynamic reent which is needed
to allow save MT support. Minor patch to FreeRTOS and update the
FreeRTOS variant.cpp and setup to support it.
Free up 4K of RAM and 6K of flash when no exceptions are enables (default).
The original toolchain was including exception code in libstdc++ by default.
Reduce installation by ~50MB and download by ~25M by removing unused LTO
gcc support.
GDB for non-Linux systems was built w/o expat which caused odd behavior
under Windows and other systems (i.e. breakpoints not working, etc.)
New toolchain manually builds cross-compiled libexpat and ensures it is
used, fixing the issue.
Windows OpenOCD binaries now come from manually built and tested copies
(using a real Windows system).
Fixes#478Fixes#457Fixes#456
and probably others...
