* Update to Pico-SDK v1.5
* Hook in pico_rand, use ioctl to set ipv6 allmulti
* Move into PicoSDK LWIP mutex, hack timer sizes
* Utilize much of the PicoSDK infrastructure for WiFi
* Add WiFi::begin(ssid, pass, bssid)
* WiFiMulti to use BSSID, make more robust
WiFiMulti will now be more aggressive and try all matching SSIDs, in order
of RSSI, using the BSSID to identify individual APs in a mesh.
Before, if the highest RSSI AP didn't connect, it would fail immediately.
Now, it will go down the list, ordered by RSSI, to attempt to get a link.
* Add Bluetooth support from Pico-SDK
Able to build and run the HID Keyboard Demo from the Arduino IDE, almost
as-is.
Will probably need to make BT configurable. Enabling BT on a plain WiFi
sketch uses 50KB of flash and 16KB of RAM even if no BT is used.
* Separate picow libs, BT through menus, example
Build normal Pico.a and 4 different options for PicoW IP/BT configuration.
Use IP=>IP/Bluetooth menu to select between options.
* CMakefile rationalization
* Move BT TLV(pairing) out of last 2 flash sectors
The pairing keys for BT are stored at the end of flash by default, but
we use the last sector of flash for EPROM and the penultimate one for
the filesystem. Overwriting those in BT could cause some real exciting
crashes down the line.
Move the store to an app-build specific address using a dummy const
array to allocate space in the application image itself.
* PicoBluetoothHID with BT Mouse, Joystick, Keyboard
Add simple Bluetooth Classic HID helper function and port the existing
USB HID devices to it. Port their examples.
* Protect BT key storage from multicore
* Add short-n-sweet Bluetooth documents
* Add Bluetooth Serial port library
* Turn off BT when the BT libraries exit
* add rough for scorpio
* Add SCORPIO items from ladyada
* Change PID in makeboards.py instead of boards.txt
* Fix PID in scorpio JSON
* README: Add Feather SCORPIO to supported boards
* Fix PIDs using values from MBAdafruitBoards
Still unsure about pid.[1-7] but let's see what happens
* boards.txt fixed by running makeboards.py
Co-authored-by: lady ada <limor@ladyada.net>
* Add HTTP-parser lib to support ESP32 WebServer
* Add WebServer from ESP32. Only supports HTTP
* Separate HTTP server from the network server
Instead of managing the WiFiServer/WiFiServerSecure in the same object
as the HTTP handling, split them into separate objects. This lets
HTTP and HTTPS servers work without templates or duplicating code.
The HTTP block just gets a `WiFiClient*` and works with that to only
do HTTP processing, while the upper object handles the appropriate
server and client types.
* Add HTTPS server
* Clean up some THandlerFunction refs
* Refactor into a template-ized WebServer/WebServerSecure
* Add DNSServer examples which need WebServer
* Fix CoreMutex infinite recursion crash
Core could crash while Serial debugging was going on and prints were
happening from LWIP/IRQ land and the main app.
* Add HTTPUpdateServer(Secure)
* Add MIME include, optimize WebServer::send(size,len)
When send()ing a large buffer, the WebServer::send() call would
actually convert that buffer into a String (i.e. duplicate it, and
potential issues with embedded \0s in binary data).
Make a simple override to send(size, len) to allow writing from the
source buffer instead.
* Fix WiFiClient::send(Stream), add FSBrowser example
Adds a 12K OTA stub 3rd stage bootloader, which reads new firmware
from the LittleFS filesystem and flashes on reboot.
By storing the OTA commands in a file in flash, it is possible to
recover from a power failure during OTA programming. On power
resume, the OTA block will simply re-program from the beginning.
Support cryptographic signed OTA updates, if desired. Includes
host-side signing logic via openssl.
Add PicoOTA library which encapsulates the file format for
the updater, including CRC32 checking.
Add LEAmDNS support to allow Arduino IDE discovery
Add ArduinoOTA class for IDE uploads
Add MD5Builder class
Add Updater class which supports writing and validating
cryptographically signed binaries from any source (http,
Ethernet, WiFi, Serial, etc.)
Add documentation and readmes.
* Add support for the WiFi chip on the Pico W board.
* USB interrupt now no longer hard coded (conflicted with the WiFi IRQ).
* Add in Pico W board to makeboards.py
* Add in GPIO and variant support
* Initialize WiFi in the Variant
* Use manual LWIP, fix size accounting
* Remove the SDK WiFi overrides
* Pulling in work done in the ESP8266 core.
* Make IPAddress support IPv6
* Build LWIP with IPv4 and IPv6 support
* Use proper MAC
* Avoid cyw_warn crash. Make macro to a comment while building
* Add WiFiServer
* Add WiFiUdp
* Move LWIP-specific support files to LWIP_Ethernet
* Add WiFi::ping (ICMP ping)
* Move ICMP echo (ping) to LWIPIntfDev
* Move hostByName to LwipIntfDev
* Add AP mode with simple DHCP server
* Add some examples and basic ESP8266 compat hacks
* Update Adafruit TinyUSB to fix crash
* Set DHCP hostname
* Make Wifi.begin() return CONNECTED with link + IP
* Return connected() on WiFi::begin
* Fix spurious TCP retransmission
* Protect LWIP from reentrancy
The Pico SDK calls "sys_check_timeouts() from inside a periodic interrupt.
This appears unsafe, as the interrupt could happen while already in the
(non-reentrant) LWIP code.
Block the interrupt from calling sys_check_timeouts by using a global flag
manually set via an RAII recursive lock.
Add interrupt protection macros around critical sections inside LWIP via
the standard defines.
These two changes should make LWIP significantly more stable and long
running.
* Support disconnecting and reconnecting WiFi
* Add WiFiServer simple example
* Update documentation
Fixes#666Fixed#665
Rewrite the I2S code from scratch to eliminate the dependence on the
pico-extras implementation and to support I2S input as well.
8-bit, 16-bit, 24-bit, and 32-bit words are supported.
Multiple I2S ports are allowed (theoretically up to 6 because
2 DMA channels are required per port).
I2S input and I2S output are supported.
Add input example
Fixes#535Fixes#99Fixes#562
Using all the work from @hfellner and others, add FreeRTOS
SMP support.
Allow idling cores through the FreeRTOS FIFO queue to
allow for file system and EEPROM support.
Make delay a weak function so FreeRTOS can override.
Add cycle count support under FreeRTOS using a PIO SM.
Use a task-based approach for handling the USB periodic work
instead of the IRQ-based one in the main core.
Set 8 prio levels so it fits in 3 bits nicely (0..7).
