* Add PIO-based SoftwareSPI enabling SPI on any pins
The Raspberry Pi team has a working PIO-based SPI interface. Wrap it
to work like a hardware SPI interface, allowing SPI on any pin
combination.
Tested reading and writing an SD card using unmodified SD library.
* Add W5500 example
Good for testing, shows non-contiguous pin outs.
* my attempt at adding plasma_2040 support.. cant seem to get it working to test yet though?
* Tracked+replaced files, this now works it seems!
* correct serial count
* Update pins_arduino.h
* Rudimentary Pimoroni Plasma2350 support.
* include correct files + changes needed for proper support.
also!! fixes pin definitions for the i2c on Pimoroni Plasma 2350 (tested, working) and (presumably, untested) on the Plasma RP2040 too by swapping the i2c numbers. i2c now works!!
* use correct USB PID for Plasma 2350
Adds a menu item to enable onboard profiling. This requires significant
RAM and really only makes sense on devices with PSRAM to store the state.
When the menu item is selected, allocates RAM and tracks function calls and
periodically samples the PC to generate a histogram of application usage.
The onboard gmon.out file can be written over Semihosting or
some other way to transfer to a PC for analysis.
Adds a profiling example with command lines.
Using pico-sdk develop branch, add in support for CYW43-based
WiFi/BT/BLE boards on the RP2350 such as the
SparkFun Thing Plus RP2350 or the Pimoroni Pico Plus 2W.
Fixes#2608
Rolls in dynamic SPI divider #2600
* Support LED digitalWrite on RP2350+CYW
Also move "special GPIO" to 64 since the Pimoroni Pico 2W uses the
RP2350B with 48 GPIOs.
* Enable CYW43_PIN_WL_DYNAMIC in IDE and P.IO
Allows calling `cyw43_set_pins_wl(cyw43_pin_array);` to redefine the
CYW43 hookup in the variant initialization.
* Add SparkFun Thing Plus RP2350
* Add Thing Plus RP2350 PSRAM definition
* Remove radio from Thing Plus RP2350
Will need to add back once full radio support is added, see #2605
* Adds RISC-V compilation option to the IDE and Platform.IO.
* Build RP2350-RISCV libpico, libbearssl
* Fix RP2350 BearSSL library (was copied from RP2040, now built for M33)
* New GCC 14.2 toolchain is required (12.4 RISC-V support is borked)
* Newlib locking fixed prototypes
* Manually force all runtime init code into RP2350 binaries
* Add RISC-V to CI
* Remove RP2350 BOOT2.S files, binaries (not used)
* Clean up minor GCC 14.x warnings
* Add RP2350-RISCV OTA build, link
* Add RISC-V FreeRTOS files (configuration still not running, but builds)
* Add basic documentation
* Migrate RP2040-specific bits to separate dirs
* Add chip to boards.txt, isolate RP2040-specifics
* Add RP2350 boot2, bearssl, and libraries
* Platform.IO adjust to new paths
* Add RPIPICO2 JSON for P.IO
* Add RP2350 to Platform.io
* Update Picotool and OpenOCD for all hosts
* Use picotool to generate UF2s
* Build separate libpico blobs serially
Thanks for the review, @aarturo182 !
* Add RP2350 to CI
* Allow Ethernet/WiFi building for RP2350
* Update Adafruit TinyUSB to latest
* Test skip fix
* Make RP2350 Picotool work. update USB ID
* Fix EEPROM/FS flash locations
RP2350 adds a 4K header sector to the UF2, meaning we have 4K less total
flash to work with. Adjust all constants appropriately on the RP2350.
* Adds ilabs board and PSRAM support. (#2342)
* Adds iLabs boards and basic PSRAM support.
* Make PSRAM come up as part of chip init
Uses SparkFun psram.cpp to set timings on clocks which are defined in the
variant file. Prefix things with RP2350_PSRAM_xxx for sanity.
Users don't need to call anything, PSRAM "just appears". Still need to
add in malloc-type allocation.
* Add board SparkFun ProMicro RP2350
Same pinout as the SparkFun ProMicro RP2040 with 8MB PSRAM and RP2350
* Add TLSF library for use w/PSRAM
Fork of upstream to include add'l C++ warning fixes.
* Add pmalloc/pcalloc to use PSRAM memory
free() and realloc() all look at the pointer passed in and jump to the
appropriate handler. Also takes care of stopping IRQs and taking the
malloc mutex to support multicore and FreeRTOS (when that workd)
* Fix BOOTSEL for RP2350
* Add simple rp2040.idleOtherCore test
* Add Generic RP2350 and clean up PSRAM menus
Commercial boards now only have 1 size PSRAM, no need to have menu for them.
* Add Solder Party RP2350 Stamp boards (#2352)
* Add PSRAM heap info helpers, mutex lock mallinfo
* Add RP2350 docs
* FreeRTOS and OTA unsupported warnings for RP2350
Adds a library to run classic Bluetooth A2DP source (output) audio from
the PicoW. Simple example showing operation and callbacks.
Factor out multiple BT lock/unlock and place in the PicoW variant files.
* Add FatFS for onboard flash use/sharing of FAT
* Move all to "fatfs" namespace
The FatFS library defines commonly used names like WORD which could conflict
with user code otherwise.
* Restyle
* FTL-based, wear-leveling FatFS with USB export
Allow using FAT filesystem with onboard flash in a safer, wear-leveled
way and to export the onboard flash to the host as a USB drive for easy
data transfer.
* Update documentation
* Fix submodule reference
* Don't spellehcek ChaN FatFS files
* Disable FTL debugging
* More codespell skips
* Move to latest SPIFTL library
* Allow using raw flash instead of FTL
* Remove unneeded static FIL 4k allocation
* Expose FAT FS format configuration options
* Update documentation
* Remove USB partial flash rewrites
* Remove unneeded dups of FatFS sources
Leave the LICENSE.md and README.md to point to upstream.
* Clean up comments
The `Picoprobe` example showing how to upload to Ubuntu is invalid because Ubuntu does not create or assign users to a `users` group (for many major releases, now).
The reason the example worked is because the permissions were applied globally, rendering the `GROUP=users` assignment in the rule irrelevant. Hence, this assignment has been dropped.
The `pico-debug` example has been updated similarly, but it uses a proper group-level rule, and Ubuntu does still use group `plugdev`.
The reader thus has two good examples of creating `udev` rules.
Avoid issues with interrupts and priority inversions and other deadlocks
and use a SW based random generator for LWIP when under FreeRTOS.
This means removing any overrides for sleep_until and the two
get_rand_xx calls from the SDK, making things much saner.
Related to #1883, #1872, and other random FreeRTOS lockups.
* Aggregated several earlier patches in one to add RP2040-Eins board into the project.
- Moved RP2040-ProMini in alphabetical order position.
- Added board description files for RP2040-Eins.
- Added board header file for RP2040-Eins.
- Adjusted unused pins order of RP2040-ProMini to be the same as in RP2040-Eins.
- Added RP2040-Eins to README.md.
- Renamed board files to use underscores to better fit the existing file naming style.
* Updated README.md
