* Replace ESP8266SdFat w/SdFat 2.3.0, add SDIO and ExFAT support
Remove ESP8266SdFat fork and replaces with upstream SdFat to simplify
maintenance.
This 2.3.0 version adds SDIO support and enables exFAT support.
Also upgraded FAT filename support to 256 chars, identical to LittleFS.
* Add SDIO support to SD and SDFS, documentation, and examples
* Update SD examples to all support SPI0, SPI1, or SDIO
* Adds RISC-V compilation option to the IDE and Platform.IO.
* Build RP2350-RISCV libpico, libbearssl
* Fix RP2350 BearSSL library (was copied from RP2040, now built for M33)
* New GCC 14.2 toolchain is required (12.4 RISC-V support is borked)
* Newlib locking fixed prototypes
* Manually force all runtime init code into RP2350 binaries
* Add RISC-V to CI
* Remove RP2350 BOOT2.S files, binaries (not used)
* Clean up minor GCC 14.x warnings
* Add RP2350-RISCV OTA build, link
* Add RISC-V FreeRTOS files (configuration still not running, but builds)
* Add basic documentation
* Adds a menu item for selecting type of ESP wifi type.
* Updated pin definitions to work with ESP hosted.
* Fixed residual debug modification.
* Added ESPHost support library.
* Removed local cloning of ESPHost and added to excluded from CI
* Updated boards.txt
---------
Co-authored-by: Pontus Oldberg <pontus.oldberg@non.se.com>
Pull in Raspberry Pi's custom RP2350 ARM and RISC-V ports for FreeRTOS.
Basic tests run, but stress mutex test is failing in unique and interesting
ways.
* Add simplified switching test catching task swap problem
* Freertosrp2350: use FreeRTOS macros in noInterrupts/interrupts when applicable. (#2456)
* Use FreeRTOS macros in noInterrupts/interrupts when applicable.
* Fixed calling taskEXIT_CRITICAL and taskENTER_CRITICAL
---------
Co-authored-by: fietser28 <fietser28@users.noreply.github.com>
* Migrate RP2040-specific bits to separate dirs
* Add chip to boards.txt, isolate RP2040-specifics
* Add RP2350 boot2, bearssl, and libraries
* Platform.IO adjust to new paths
* Add RPIPICO2 JSON for P.IO
* Add RP2350 to Platform.io
* Update Picotool and OpenOCD for all hosts
* Use picotool to generate UF2s
* Build separate libpico blobs serially
Thanks for the review, @aarturo182 !
* Add RP2350 to CI
* Allow Ethernet/WiFi building for RP2350
* Update Adafruit TinyUSB to latest
* Test skip fix
* Make RP2350 Picotool work. update USB ID
* Fix EEPROM/FS flash locations
RP2350 adds a 4K header sector to the UF2, meaning we have 4K less total
flash to work with. Adjust all constants appropriately on the RP2350.
* Adds ilabs board and PSRAM support. (#2342)
* Adds iLabs boards and basic PSRAM support.
* Make PSRAM come up as part of chip init
Uses SparkFun psram.cpp to set timings on clocks which are defined in the
variant file. Prefix things with RP2350_PSRAM_xxx for sanity.
Users don't need to call anything, PSRAM "just appears". Still need to
add in malloc-type allocation.
* Add board SparkFun ProMicro RP2350
Same pinout as the SparkFun ProMicro RP2040 with 8MB PSRAM and RP2350
* Add TLSF library for use w/PSRAM
Fork of upstream to include add'l C++ warning fixes.
* Add pmalloc/pcalloc to use PSRAM memory
free() and realloc() all look at the pointer passed in and jump to the
appropriate handler. Also takes care of stopping IRQs and taking the
malloc mutex to support multicore and FreeRTOS (when that workd)
* Fix BOOTSEL for RP2350
* Add simple rp2040.idleOtherCore test
* Add Generic RP2350 and clean up PSRAM menus
Commercial boards now only have 1 size PSRAM, no need to have menu for them.
* Add Solder Party RP2350 Stamp boards (#2352)
* Add PSRAM heap info helpers, mutex lock mallinfo
* Add RP2350 docs
* FreeRTOS and OTA unsupported warnings for RP2350
If a file called `.ci.defines` is present in a directory, apply those
while building the specified sketch.
* Add an lwip_ESPHost test, like the wired Ethernet ones
* Add WINC1500 test and CI hook
* Remove 1 minor warning in WINC build
When get.py is run in a script the percent-update printouts shown while
downloading the toolchain end up as 100s to 1000s of lines in log files.
When stdout is not a terminal, avoid printing these percentages and
shrink logfiles significantly. Errors/etc. are still reported as normal.
Fixes#171
Under Windows, it is very hard to make a symlink and by default git won't
make one to the Arduino API directory, causing annoying build errors.
Avoid the issue by duplicating the ArduinoAPI directory explicitly and using
CI to verify that there are no differences between the two.
