Using pico-sdk develop branch, add in support for CYW43-based
WiFi/BT/BLE boards on the RP2350 such as the
SparkFun Thing Plus RP2350 or the Pimoroni Pico Plus 2W.
Fixes#2608
Rolls in dynamic SPI divider #2600
* Support LED digitalWrite on RP2350+CYW
Also move "special GPIO" to 64 since the Pimoroni Pico 2W uses the
RP2350B with 48 GPIOs.
* Enable CYW43_PIN_WL_DYNAMIC in IDE and P.IO
Allows calling `cyw43_set_pins_wl(cyw43_pin_array);` to redefine the
CYW43 hookup in the variant initialization.
Adds a library to run classic Bluetooth A2DP source (output) audio from
the PicoW. Simple example showing operation and callbacks.
Factor out multiple BT lock/unlock and place in the PicoW variant files.
Many examples require that LED_BUILTIN be defined as a constant, so we
can't use a ternary operator to swap between Pico and PicoW LED pins.
Instead, do the check in the digitalWrite/digitalRead/pinMode calls
to cover most of the uses.
* Add support for the WiFi chip on the Pico W board.
* USB interrupt now no longer hard coded (conflicted with the WiFi IRQ).
* Add in Pico W board to makeboards.py
* Add in GPIO and variant support
* Initialize WiFi in the Variant
* Use manual LWIP, fix size accounting
* Remove the SDK WiFi overrides
* Pulling in work done in the ESP8266 core.
* Make IPAddress support IPv6
* Build LWIP with IPv4 and IPv6 support
* Use proper MAC
* Avoid cyw_warn crash. Make macro to a comment while building
* Add WiFiServer
* Add WiFiUdp
* Move LWIP-specific support files to LWIP_Ethernet
* Add WiFi::ping (ICMP ping)
* Move ICMP echo (ping) to LWIPIntfDev
* Move hostByName to LwipIntfDev
* Add AP mode with simple DHCP server
* Add some examples and basic ESP8266 compat hacks
* Update Adafruit TinyUSB to fix crash
* Set DHCP hostname
* Make Wifi.begin() return CONNECTED with link + IP
* Return connected() on WiFi::begin
* Fix spurious TCP retransmission
* Protect LWIP from reentrancy
The Pico SDK calls "sys_check_timeouts() from inside a periodic interrupt.
This appears unsafe, as the interrupt could happen while already in the
(non-reentrant) LWIP code.
Block the interrupt from calling sys_check_timeouts by using a global flag
manually set via an RAII recursive lock.
Add interrupt protection macros around critical sections inside LWIP via
the standard defines.
These two changes should make LWIP significantly more stable and long
running.
* Support disconnecting and reconnecting WiFi
* Add WiFiServer simple example
* Update documentation
Fixes#666Fixed#665
