* Update to Pico-SDK v1.5
* Hook in pico_rand, use ioctl to set ipv6 allmulti
* Move into PicoSDK LWIP mutex, hack timer sizes
* Utilize much of the PicoSDK infrastructure for WiFi
* Add WiFi::begin(ssid, pass, bssid)
* WiFiMulti to use BSSID, make more robust
WiFiMulti will now be more aggressive and try all matching SSIDs, in order
of RSSI, using the BSSID to identify individual APs in a mesh.
Before, if the highest RSSI AP didn't connect, it would fail immediately.
Now, it will go down the list, ordered by RSSI, to attempt to get a link.
* Add Bluetooth support from Pico-SDK
Able to build and run the HID Keyboard Demo from the Arduino IDE, almost
as-is.
Will probably need to make BT configurable. Enabling BT on a plain WiFi
sketch uses 50KB of flash and 16KB of RAM even if no BT is used.
* Separate picow libs, BT through menus, example
Build normal Pico.a and 4 different options for PicoW IP/BT configuration.
Use IP=>IP/Bluetooth menu to select between options.
* CMakefile rationalization
* Move BT TLV(pairing) out of last 2 flash sectors
The pairing keys for BT are stored at the end of flash by default, but
we use the last sector of flash for EPROM and the penultimate one for
the filesystem. Overwriting those in BT could cause some real exciting
crashes down the line.
Move the store to an app-build specific address using a dummy const
array to allocate space in the application image itself.
* PicoBluetoothHID with BT Mouse, Joystick, Keyboard
Add simple Bluetooth Classic HID helper function and port the existing
USB HID devices to it. Port their examples.
* Protect BT key storage from multicore
* Add short-n-sweet Bluetooth documents
* Add Bluetooth Serial port library
* Turn off BT when the BT libraries exit
Many examples require that LED_BUILTIN be defined as a constant, so we
can't use a ternary operator to swap between Pico and PicoW LED pins.
Instead, do the check in the digitalWrite/digitalRead/pinMode calls
to cover most of the uses.
* add rough for scorpio
* Add SCORPIO items from ladyada
* Change PID in makeboards.py instead of boards.txt
* Fix PID in scorpio JSON
* README: Add Feather SCORPIO to supported boards
* Fix PIDs using values from MBAdafruitBoards
Still unsure about pid.[1-7] but let's see what happens
* boards.txt fixed by running makeboards.py
Co-authored-by: lady ada <limor@ladyada.net>
* Adds support for Challenger RP2040 WiFi boards
* Added Challenger board to makeboards build script
* Adds new challenger board with LTE modem.
* Updated after getting approved PID from Raspberry Pi
* Add support for reverse numbering of analog pins.
* Added minimal HW support for onboard WiFi modem.
* Added challenger-nb-rp2040-wifi and RPICO32 module.
* Updated PID for RPICO32
* Added a simple support class for challenger LTE boards
* Update ChallengerLTE.cpp
Fixed spelling error
* Adds option for setting USB max power in makeboards.py
* Added new board Challenger RP2040 LoRa
* Added new lora board to readme.
* Added missing SERIAL2 and LoRa module GIO pins.
* Added support for enabling UART CTS and RTS pins.
* Updated boards.txt after merge conflict of makeboards.py
* Fixed incorrect indention
* Fixed PR comments
* Add new Challenger RP2040 WiFi/BLE board (https://ilabs.se/challenger-rp2040-wifi-ble-datasheet)
* * Updated PID for WiFi/BLE board
* Added abstraction pins for both versions of wifi modules
* Added support for replacing support class serial port.
* Added support for retrieving support class serial port.
* Fixed spelling errors.
* Updated helper class for Challenger NB board.
* Added Challenger sdrtc and subghz boards.
* Updated readme.
* Re ran makeboards to generate new index.
* Added to possibility to have extra compiler directives for a board.
* Added extra compiler options to JSON generation.
* Allows having a list of extra macros to define
* Fixed incorrect USB PID for Challenger NB board.
* Added board initialization for all wifi boards.
Co-authored-by: Earle F. Philhower, III <earlephilhower@yahoo.com>
* Add support for the WiFi chip on the Pico W board.
* USB interrupt now no longer hard coded (conflicted with the WiFi IRQ).
* Add in Pico W board to makeboards.py
* Add in GPIO and variant support
* Initialize WiFi in the Variant
* Use manual LWIP, fix size accounting
* Remove the SDK WiFi overrides
* Pulling in work done in the ESP8266 core.
* Make IPAddress support IPv6
* Build LWIP with IPv4 and IPv6 support
* Use proper MAC
* Avoid cyw_warn crash. Make macro to a comment while building
* Add WiFiServer
* Add WiFiUdp
* Move LWIP-specific support files to LWIP_Ethernet
* Add WiFi::ping (ICMP ping)
* Move ICMP echo (ping) to LWIPIntfDev
* Move hostByName to LwipIntfDev
* Add AP mode with simple DHCP server
* Add some examples and basic ESP8266 compat hacks
* Update Adafruit TinyUSB to fix crash
* Set DHCP hostname
* Make Wifi.begin() return CONNECTED with link + IP
* Return connected() on WiFi::begin
* Fix spurious TCP retransmission
* Protect LWIP from reentrancy
The Pico SDK calls "sys_check_timeouts() from inside a periodic interrupt.
This appears unsafe, as the interrupt could happen while already in the
(non-reentrant) LWIP code.
Block the interrupt from calling sys_check_timeouts by using a global flag
manually set via an RAII recursive lock.
Add interrupt protection macros around critical sections inside LWIP via
the standard defines.
These two changes should make LWIP significantly more stable and long
running.
* Support disconnecting and reconnecting WiFi
* Add WiFiServer simple example
* Update documentation
Fixes#666Fixed#665
Add plumbing to allow `Wire`, `Serial1`, `SPI1` to map to the 2nd
hardware unit for devices where the PCB layout only brings out the
2nd port.
Fix the Seeedstudio XAIO pins
Fixes#594
* Adds support for Challenger RP2040 WiFi boards
* Added Challenger board to makeboards build script
* Adds new challenger board with LTE modem.
* Updated after getting approved PID from Raspberry Pi
* add two variant files
* add trinkey and stemma friend
* add fast SPI transfer using pico-sdk blocks
* update makeboards.py for new variants
- STEMMA Friend RP2040
- Trinkey RP2040 QT
* run astyle on SPI library
* fix auto -> ssize type
* astyled
* woops ssizet != sizet!
* a nice day for a new board definition! this is a macropad with 12 keys, oled and rotary encoder
Co-authored-by: hathach <thach@tinyusb.org>
Build all 4 different boot_stage2 objects with SPI/2 and SPI/4 options.
Add a menu to the generic board to allow selecting between them.
Use the potato/4 boot2 for the Adafruit Feather until we have a better
version verified.
Fixes#42
Add support for Adafruit Feather RP2040 (8MB). Identified with a unique
USB PID so it displays properly once programmed one time. Moved LED to
pin 13 (per the website docs), but have no board to test.
Add over/underclocking menus, applied at boot. Use at your own risk, as
usual.
Add shims to allocate flash space for a filesystem (but not implemented
yet).
Add a "generic" RP2040 board
Some paths hardcoded to my custom toolchain build dir, will be updated
to a package.json tools setup soon.
https://github.com/earlephilhower/pico-quick-toolchain
Blink and Fade examples work (i.e. digitalWrite/analogWrite/delay).
Includes a discovery script which will detect RPI Picos in UF2 bootmode.
