Use GNU LD MAX() to ensure the uninitialized RAM portions are after the
OTA region. For most apps this already happens, so there will be no
overhead added.
The uninitted RAM macro would fail because the OTA code would clear out the
first 50KB or so of RAM to copy its code and global values.
Move all global values to the end of RAM in OTA, and then align any uninitted
vars to a 16KB unit to ensure it won't appear in the 1st part of RAM that is
still needed to copy the OTA executable.
In the normal case, without any uninit_ram vars, no additional space is used.
When uninit_ram is used, up to 16KB of space may be lost to get that alignment,
but it will work properly.
Fixes#1188
Because OTA has changed the flash map from standard, picotool ends up
crashing or hanging while trying to operate on the current built files.
Remove the binary_info calls and structures completely to avoid any
issue.
Fixes#803
Adds a 12K OTA stub 3rd stage bootloader, which reads new firmware
from the LittleFS filesystem and flashes on reboot.
By storing the OTA commands in a file in flash, it is possible to
recover from a power failure during OTA programming. On power
resume, the OTA block will simply re-program from the beginning.
Support cryptographic signed OTA updates, if desired. Includes
host-side signing logic via openssl.
Add PicoOTA library which encapsulates the file format for
the updater, including CRC32 checking.
Add LEAmDNS support to allow Arduino IDE discovery
Add ArduinoOTA class for IDE uploads
Add MD5Builder class
Add Updater class which supports writing and validating
cryptographically signed binaries from any source (http,
Ethernet, WiFi, Serial, etc.)
Add documentation and readmes.
* Add support for the WiFi chip on the Pico W board.
* USB interrupt now no longer hard coded (conflicted with the WiFi IRQ).
* Add in Pico W board to makeboards.py
* Add in GPIO and variant support
* Initialize WiFi in the Variant
* Use manual LWIP, fix size accounting
* Remove the SDK WiFi overrides
* Pulling in work done in the ESP8266 core.
* Make IPAddress support IPv6
* Build LWIP with IPv4 and IPv6 support
* Use proper MAC
* Avoid cyw_warn crash. Make macro to a comment while building
* Add WiFiServer
* Add WiFiUdp
* Move LWIP-specific support files to LWIP_Ethernet
* Add WiFi::ping (ICMP ping)
* Move ICMP echo (ping) to LWIPIntfDev
* Move hostByName to LwipIntfDev
* Add AP mode with simple DHCP server
* Add some examples and basic ESP8266 compat hacks
* Update Adafruit TinyUSB to fix crash
* Set DHCP hostname
* Make Wifi.begin() return CONNECTED with link + IP
* Return connected() on WiFi::begin
* Fix spurious TCP retransmission
* Protect LWIP from reentrancy
The Pico SDK calls "sys_check_timeouts() from inside a periodic interrupt.
This appears unsafe, as the interrupt could happen while already in the
(non-reentrant) LWIP code.
Block the interrupt from calling sys_check_timeouts by using a global flag
manually set via an RAII recursive lock.
Add interrupt protection macros around critical sections inside LWIP via
the standard defines.
These two changes should make LWIP significantly more stable and long
running.
* Support disconnecting and reconnecting WiFi
* Add WiFiServer simple example
* Update documentation
Fixes#666Fixed#665
Build all 4 different boot_stage2 objects with SPI/2 and SPI/4 options.
Add a menu to the generic board to allow selecting between them.
Use the potato/4 boot2 for the Adafruit Feather until we have a better
version verified.
Fixes#42
Add support for Adafruit Feather RP2040 (8MB). Identified with a unique
USB PID so it displays properly once programmed one time. Moved LED to
pin 13 (per the website docs), but have no board to test.
Add over/underclocking menus, applied at boot. Use at your own risk, as
usual.
Add shims to allocate flash space for a filesystem (but not implemented
yet).
Add a "generic" RP2040 board
2021-03-28 10:56:53 -07:00
Renamed from variants/generic/memmap_default.ld (Browse further)
